Behind the Scenes: The Time Machine (Pal, 1960) with Rod Taylor and Alan Young

Fantastic behind the scenes
10 followers
13 Video Views·Sep 30, 2026
A turn-of-the-century inventor's vision for a utopian society is disillusioned when travelling forward in time reveals a dark and dangerous fate for humanity.
This audio-visual film commentary has been extensively edited, dubbed and transformed by Serious Feather in an original and thoughtful manner for historical, cultural and educational purposes.
AI Generated·May contain errors
What you see in front of you is a true landmark.
The year 1948, this 15-foot, 6-inch-long moonscape,
created by Chesley Bonestell,
who helped design the Golden Gate Bridge, by the way,
is about to make science fiction history
and propel its very young director into a glorious future.
George Pal had enlightened the minds of audiences
to the world of science fiction
with the release of Destination Moon in 1950.
Well, in 1955, our paths were soon to cross.
I was making a movie called World Without End
about being trapped in a time warp,
and George had acquired the rights from the H.G. Wells estate
to make a movie about time travel.
Well, four years later, this wonderful little man
with a contagious smile would cast me
in this now classic motion picture,
The Time Machine.
It took the creative magic of George Pal
and the fabulous production know-how of Metro-Goldwyn-Mayer
to catapult you through time into a world that is yet to be.
Why is it that we usually ignore the fourth dimension?
You see, we can move in the other three.
As the doctor said, up, down, forwards, backwards, sideways.
But when it comes to time, we are prisoners.
I honestly think, when I worked on the set,
that I expected something out of Frankenstein.
You know, electrodes and wires and things popping and whatnot.
And when I saw this wonderful-looking thing
that was straight out of the Victorian era,
I was ready to really believe
that by sitting in this thing,
I could indeed travel from 1899,
which was the period of the picture when it started,
through time.
It impressed me so much.
I just loved the look of it, and I still do.
Knowing the story was based at the turn of the century,
George only had to use his childhood memories
to first envision his machine.
His boyish love for sledding.
To slide down a snowy hill with a cold wind against his face.
That made him realize he needed a sled-like machine
to slide through time.
So when his crew brought him this first design of the time machine,
George turned it down.
This wasn't a sled. It was more like an electric chair.
Not the positive image he wanted to project.
But something did catch his eye.
Something he liked.
Behind the machine,
twirling, spinning,
propelling it into the future.
A dish.
The first important link.
George was into every little detail.
I mean, even the design on the dish.
And these little knobs and ridges.
There are 365 of them.
365 days in a year. Makes sense, doesn't it?
Now, George wanted to have it spin in both directions.
Clockwise for the future,
and counterclockwise for the past.
But it was a very fragile part of the machine,
and with his limited budget, that would prove too costly.
Now, George knew he wanted a special seat for his machine.
It had to stay true to the era.
So the crew came up with an old-fashioned barber chair.
Because its headrest looked like a pilot's seat.
But the pedestal, that wouldn't do.
So they took that off,
and replaced it with legs and a wooden design on its side,
giving it a Victorian look.
As if the time traveler had carved it himself.
Staying true to H.G. Wells' novel,
George surrounded it with brass railings.
His sled was beginning to take shape.
But unlike a boy pushing his sled down a hill,
George needed something believable to give his machine power.
I suppose he could have used something relating to nuclear power,
like uranium, since science fiction movies at that time
dealt with atomic power and bombs.
But for George, atomic power and bombs would never do.
So, it's back to Wells' novel,
and something modern science was researching.
Crystals. That was it.
A clean source of power.
A positive source.
Fans have been making models of the time machine
ever since the film was released.
You see this little gem here?
This was made in 1960 by an 18-year-old, Mike Miner.
All from memory.
Well, Mike went on to become the art director
for Star Trek and The Wrath of Khan.
Now here, you see this little guy?
The dish is the size of a dime.
And Bob said to Steve Stockparker, who made this,
well, you can't make it any smaller than that.
So, three weeks later, Steve came back
with this.
It's the size of a housefly.
The original, beautiful little version of the time machine for the movie
was made by Wah Chang.
I just used the blueprints that were supplied by MGM,
and we built a model from that.
Well, of course, it was made after the large one was made,
and we had working drawings.
Paula Barron did some of the work, and I did some of the work.
The metal, fancy scroll work
was modeled in clay
and cast in, I think,
a low melt, something like woods metal.
For the small machine, probably
tops to $50.
And when the film was finished,
George took it home to his house.
And then the Bel Air fire struck,
and George's home was destroyed
with all his treasured possessions
and, of course, this beautifully made little machine.
It was a tragedy.
You know, George was a master of illusion.
He knew, with the aid of time-lapse photography,
that he could make us believe the machine was
traveling through time by the aid of one simple gimmick,
the change in women's fashions over the decade.
Simple? Simple and brilliant.
I recently came across this storyboard.
It hasn't been seen in 33 years.
Now, this was only used briefly in the film
because George didn't want to destroy the illusion
and relate to 1960, when the movie was released.
And this storyboard has never, ever been seen.
And it shows how my lovely friend and I
would change had we gone even further
into the future.
Photographing a story like The Time Machine presents an interesting challenge.
Because when I'm in the fourth dimension,
how do we make you believe I'm traveling through time?
Simple.
George called his old friends at Projects Unlimited
Timba, Hua Cheng, and Gene Ward.
Here's Gene.
The most convincing thing was probably the most simple one.
And that, to me, was the first view out of the
skylight through the lab.
Because it's something that you can relate to
more than a fancy great hall
being built up in the future.
To see the sun arc across the sky and the clouds change
and the sun come up and down and the moon go across
I think set the pattern for his movement
through time more than any other scene in the film.
Possibly,
having been covered by lava
and then the lava walls breaking down
may have, but not really.
I think the other was, to me, more convincing.
We just had a light that went on a track
and just moved it one frame at a time.
No computers.
Well, I'm sure some things would have been made easier
but other things we did probably
as fast or maybe faster than you could do
with a computer.
And maybe easier, in a way.
And also because there's a different look
to most computer animation.
An interesting fact is that the mat shots
were done by Bill Brace
and he'd never done a mat shot before coming to project.
He did very realistic renderings
of flowers and plants
for the L.A. Times.
But we knew he could do it and it turned out very well.
We decided that that would be the way to do that kind of scene
and there were a lot of them in the time machine.
So we set up his canvas
in front of the camera, a locked off camera
and he just started to paint, frame by frame.
That's how those scenes were done.
I think he did a fabulous job.
It really shows in the apples
because of the ripening and backing off
and aging and so forth.
It's really a great job.
We came up with this kind of sequence
in sort of a joint effort.
A lot of this stuff was already in George's script
and ideas for the effects
and what we would do, of course, is sit down
and decide how we could either enhance or simplify
depending on the budget.
This was done stop frame animation
and in order to guide it
we used sheets like this, animation sheets
which actually I borrowed from the cartoon industry.
As you can see, they're marked out
for frames and feet
and film
and that gives the direction to the animator
of what he should do here.
Clock was easy, of course.
Candle offered a little bit of a problem
since we didn't have all that fancy
computerized camera equipment in those days.
It became a trick as to how to be sure
to make the candle go down
in the proper sequence
not being able to just light it and run the camera
because we had to do these things together, stop frame.
That became a little of a challenge.
The same principle was used
in the flower scene here and the snail
which was, of course, a little
manufactured rubber snail.
I think by the time you set the scene up like this
and each one of these flowers were animated
that it probably was a four or five hour
animation scene to get the five seconds
on the screen.
One of the memorable scenes in the movie
is when I kick one of these nasty looking morlocks
off the machine and he disintegrates
because I'm going the wrong way in time.
Anyway, Gene's got the storyboard for this sequence.
I'll let him tell you how they made it.
These figures were wax
created from molds made off of real bones
and real skulls
so that the
process of the disintegration
was a combination of
frame by frame of scraping a little wax
away maybe and then with the heat
I think a hair dryer
gently here and there.
A little tricky because
this is the kind of thing you didn't want to goof on
and have to do it again because then you need a whole new
set of things. You can't just
put it all back together again very easily.
The time machine was made on a relatively low budget.
The whole picture was $800,000
$750,000. All right.
But it was fascinating entertainment
and it was a technical achievement because it earned
The time machine is supposed to go in two different directions
into the past or into the future
but this one had quite a different journey.
It all started in 1970
when MGM held a public auction
and along with several other famous movie props from
Forbidden Planet and Atlantis and others was
the time machine.
The auctioneers were never too excited about selling the time machine
it was just another old movie prop.
Also something was missing from the machine
the entire control panel.
The special effects crew, Projects Unlimited
had sawn it off during the post production of the movie
to be used to shoot inserts to show the years
rolling by on the panel.
This was done by stop frame animation
then with rear projections seen through the windows
on the panel. Timing had to be right.
Because if I moved the lever forward too fast
and the film wasn't in sync
then we had ourselves a problem.
But I'll tell you who had the big problem, the auctioneers
because they didn't have a panel.
They contacted Tom Sherman, the special effects man.
He said he'd be happy to build a new panel.
All he needed was the blueprints and about a week.
Tom, nothing comes easy.
They had no blueprints and the auction was set for the next day.
Well, Tom accepted the challenge
and by the following morning he had built a new control panel
made out of wood
pie tins, yes
painted pie tins on the sides
and Christmas tree lights on the top.
What will those special effects guys think of next, huh?
Well, anyway, the machine sold for around $10,000
along with the submarine from Atlantis
which was also a George Pell movie.
The man who bought them loaded them into this huge moving van
and he traveled all over the country charging admission.
The time machine had become
part of a sideshow.
There was another man at the auction called Bob Burns
who wanted to buy the machine, a very good friend of George's
and he kept putting out feelers as to where the machine might be
because George had once told him
he indeed would own the machine.
There was George again, full of hope, but he was right.
The man who bought it was forced to sell it.
Well, there are all kinds of rumors
that it was being sold in Florida for the second time
and it just disappeared for three years.
Then two friends of Bob's in 1974
in Orange County walked into a thrift store.
Do you believe this? A thrift store.
I'll let Bob tell you about this.
Yeah, my friends did call me about it
and it was at this thrift store, all right.
They said it wasn't in the best condition in the world.
I mean, I was thrilled on one hand to know it existed at all
because I'd heard it was destroyed who knows what.
And they said, well, there are things wrong with it.
We'll tell you later, and they did.
They told me, and when I actually heard what was wrong with it,
I was pretty depressed at the same time.
The next step was to figure out how to get it from this thrift store
for a price that I could afford
so I didn't have to pay, quote, Hollywood dollars for it
because that's the way these people seem to think
when they find out what they are.
The machine was in such bad shape when I got it
that we weren't even too sure we could even put it back together
but we figured with the people we had who loved this film so much
that they were volunteering their time to do it
and they knew we could do it.
The pods were broken in very badly because the fellow had used
photo flood lights to light it up inside and it just melted the plastic
because it was just heat-formed plastic.
All the pieces were there. It was broken, but they were there
laying around inside of it mainly.
We had to take it and actually make another sort of mold, you might say,
and heat-form it again and try to get it back in some sort of shape
because it actually wasn't even round anymore.
Now luckily for us, the non-camera side of the machine,
the pod was pretty good, so we just exchanged it
and put it over there. We still had work to do on it too
because when we took both the pods off, they almost fell completely apart.
They just didn't want to stay together anymore.
And so then we stripped the rest of the machine down.
We took the big horizontal bar off.
In fact, all the bars, everything came off of it.
It was real dinged, even had some dips in it that had to be taken out.
So everybody had to really paint and fill and paint and fill
and scrape and all that stuff, but they worked out beautifully.
You couldn't tell the difference.
The bars that go along the bottom were in actually pretty good shape
except they were really dinged up. They just weren't painted correctly.
We stripped it right down to the end,
and this is the back mechanism that held the dish
because it has a worm gear in it.
There's no way we could really tear it apart without wrecking the whole machine.
That's a shaft that comes up right out of the middle
and then bends back to hold the dish,
and that is the most important part and probably the most expensive part
of the whole machine itself, and the way it works is it kind of goes against itself.
It's a very, very strange...
It's hard to even explain what a worm gear really does.
It works like a worm.
I'm going to give it a little secret away here. I probably shouldn't do, but I will.
This thing is powered by a barbecue spit motor.
Yes, that's right, a barbecue spit motor,
and that gives it its whole power.
Then the next thing is to start on the control panel
because we had no control panel.
The one we had was Tom's, so we had to start on that.
Now, that was scale 2, so that helped a lot,
including describing with the thing of saying,
you know,
H.G. Wells type situation on there, the whole little thing,
that they did the whole thing, and that was like life-size,
so it was easy to make a schematic thing almost off of that and just do a stencil.
We had the blueprint, so rebuilding the control panel was no real big deal.
It came along real well. We had all the lights on top,
the lights that flicker in the middle, the lights on the side.
Now, an interesting thing to note, though, that is all that control panel did.
It just controlled those lights right there on the control panel that blinked and winked.
Now, the back, the dish, the pods, everything else
were all handled offstage by a technician.
Everybody seems to think it's right from this, but it's not.
Here again, remember, it is a prop.
The only thing that was totally fine that we didn't touch at all was the dish.
Nothing was really wrong with the dish.
It was fiberglass somehow. It lasted. It was okay.
And that hasn't been touched to this day.
Well, in the movie, if you notice the film,
you'll see as the movie kind of progresses, the dish gets more and more warped.
You can see it behind Rod doing this a little bit.
So they finally had to put big runners behind it as like a suspension thing
to hold it from getting any worse, which it did.
It won't ever warp any more than it has now. That's it.
The chair was gone, totally gone.
The story was the guy that got it sold the chair to somebody
because he thought it was a real 1900 barber chair.
If you turn it upside down, it's got a say on it, prop department, MGM.
I don't know what the guy paid for it. I've heard like $600.
I hope that wasn't true.
And Tom Sherman built the chair from scratch.
He had to build it from just nothing.
I mean, we had the plans, but I mean, there was nothing actually physically there.
And Lynn Barker and Dorothy Fontana helped him
when he started detailing the chair because he had to do a lot of that.
Now, when they detailed the chair, Tom ran into a slight problem
in that he couldn't find the exact type nernies, as he called them,
to put back on because they weren't made any longer.
So he had to put them on there, and then they had to get in there
and carve the rest of it in to make it work right.
And it did. It matched beautifully.
Then the chair was finally antiqued and painted by Tom,
who's an expert at this, of making it look old and kind of antiqued and stuff.
And they had to put it on the machine and make sure it was going to fit now.
It did. It fit perfect.
I mean, absolutely, the measurements were just absolutely perfect.
The next thing that was going to have to happen was we had to upholster this chair.
And a friend of mine, Mark Richards,
who created the original Ghostbusters series, by the way,
with Forrest Tucker and Larry Storch, and myself as Tracy,
this was a hobby of his, was doing this type of stuff.
And luckily, my wife Kathy found the identical cloth,
the color and the texture of the cloth that we needed.
So Mark spent quite a bit of time just upholstering the thing and putting it all together.
And, of course, that's what finished the chair
and really made it look, well, exactly like the original.
Okay, now, we got the machine done before Halloween, thank goodness,
and we decided it's got to be for the Halloween show we've got to do.
And we were trying to figure out how exactly we were going to use it,
but we knew we were going to use it.
And Mike Miner had done a beautiful set
that would revolve around from the lab and become the Morlock Cave,
which was industrial foil put over, like, wooden frames.
And then Mike Miner painted this backdrop in about an hour, I think.
He was very fast.
Then when we got everything done, it was the night of the Halloween show,
and the machine sat there looking like a jewel,
and the whole set just looked so great.
And we knew we were going to have a real good show,
because that's what we had planned for.
And David Gerrold, the fellow that wrote the Trouble with Tribbles for Star Trek,
said, I'll write it if you want.
Which I thought, hey, that's pretty neat, you know.
And plus, he alternated with Charlie Dugdale,
the other fellow that played the time traveler.
They both altered, because it was quite a long show.
And everybody that, you know, participated in the show
all had jobs that they were doing, you know.
Like, we had a fellow that did great sound.
We had a guy that did electronic stuff.
Dennis Mirren, who I think has just won his seventh Oscar by now.
Yeah, he has, as a matter of fact.
Did the lighting stuff for us and all that.
I mean, it's just the way it always worked out.
I think at that point, we were still kind of growing with our Halloween shows.
We had about, oh, close to 3,000 people to come by and see that show.
And then, of course, when George Powell and Mrs. Powell dropped by,
that was the big thrill for us.
I mean, we loved that more than anything, I do believe.
And they really enjoyed the show. It was a lot of fun.
George even took a trip in the machine.
He decided he'd like to go somewhere in there.
I don't know how far he got, but we sure had a fun time watching him in there.
Especially because he dressed for the occasion with his red and white socks.
He only wears those on very special occasions, he told me.
And our Morlocks, once in a while, they wanted to meet him, too,
because they didn't get to see him that often in the film,
so they thought they'd take a look at him now.
Of course, George had everything under control.
And some of the crew of the Halloween show got around George
to get a little picture with him sitting in the machine,
and that was the high point of everything.
I think that's something we will all remember the rest of our lives.
George loved Bob's Halloween show so much
that at Christmas 1976 he had this card made up
to share with all his friends his boyish dream,
Santa Claus in the time machine.
H.G. Wells' novel appeared in all kinds of different forms,
and on the cover of each novel was a different version of the time machine.
I mean, look at this one.
Guy looks like he's riding a broomstick.
But George's version still remains the classic.
And after Bob and his friends rebuilt it,
it appeared in the strangest and the most respected places.
Magazine and computer ads, even a messenger service, is named after.
And two very fine television series featured the time machine.
In Search Of was one.
The director was such a fan of the time machine
that he created a magnificent segment complete with an H.G. Wells look-alike.
The man playing H.G. Wells was not an actor,
but an assistant editor at the Landsberg Company who produced the series.
They projected film on his face
to show the passing of time with the different periods in history.
This segment was not based on H.G. Wells or his book,
but instead was called Time and Space.
Then it appeared on the excellent PBS series Cosmos,
hosted by Carl Sagan,
who found the machine so comfortable
that he refused to come down from the 14-foot high pedestal under the hot lights.
Now, were you imagining which century you were in, Mr. Sagan?
Were you in the past or the future?
Bob Burns and the crew were a little nervous
that the machine might topple off the high pedestal,
which, of course, it never did.
But it was during the filming of this show that a near disaster did happen.
Sometimes people tend to forget that the machine is a movie prop,
and mechanized props are very fragile.
The only way the machine can be lifted is by the wooden base.
But one of the overly zealous prop men didn't listen
and tried to pick it up by the brass railings,
pulling out all of the electrical wire.
It took hours to replace him.
But luckily for the prop man and the film schedule,
the machine still worked.
The next two appearances were the Back to the Future promos
and the Gremlins.
Now, the most recent blockbuster in time travel
was the Back to the Future trilogy
with Christopher Lloyd and Michael J. Fox.
They made a very exciting duo.
But once again, the old time machine was called upon
because Michael was comparing George's machine
with his DeLorean time machine.
Let's listen to Michael.
Is there really such thing as a time machine we can just hop into,
roar off through the cosmic calendar in any direction?
No.
Well, not yet.
Maybe next year.
Maybe in a thousand years. No one knows.
But what if we had one, right here and now?
Just imagine all the amazing things that are waiting for us out there
between all the ticks and tocks of time.
And how does our hero get to where he's going in time?
In this.
The most fantastic, flashy, four-wheel time machine
in the history of movies.
One that might even make H.G. Wells green with envy.
Something built today to recapture yesterday.
Or explore tomorrow.
Whichever you choose.
Whether we use black holes someday or machines or whatever,
you and I may have to wait a while
before we can actually physically travel back and forth in time.
But that's okay.
Because we already have another, easier way
to visit any part of time we like.
Whenever we like.
No, not inside this machine.
Inside this one.
The imagination.
