12 Dirt-Cheap 1200cc+ Motorcycles, Nobody Buys! (But They’ll Outlast Every New Bike)!

Fact Racing
22 followers
AI Generated·May contain errors
Video Summary
AI GeneratedAn expert with 15 years of experience identifies 12 undervalued motorcycles that offer superior reliability and performance compared to expensive new models. By overlooking polarizing aesthetics or dated technology, buyers can acquire elite engineering and massive power for a fraction of the original MSRP.
After 15 years buying, selling,
and riding motorcycles professionally,
I'm finally exposing 12
of the most criminally undervalued machines
the industry quietly stopped talking about
to protect new bike sale and dealer margins.
These aren't compromise builds.
These bikes deliver reliability, character,
and riding life.
The last motorcycle on this list
hasn't received a major reliability complaint
in over two decades.
In 90, 1% of Riderscroll never knew this.
Nobody buys them,
but they'll outlast every new bike
you're currently considering.
Number 12, the Honda VTX 1300.
The modern consumer abandoned traditional heavy cruisers.
The market shifted toward lightweight,
plastic-clad machines,
equipped with digital screens and Bluetooth connectivity.
Dealerships want you buying expensive modern technology.
They hide the mighty Honda VTX 1300
in the dark corner of the lot
because it represents a bygone era
of raw, unadulterated steel.
Nobody buys it because it lacks riding modes
and traction control.
It is invisible to the modern buyer.
When you analyze the specs,
you discover a mechanical masterpiece.
Honda utilized a massive 1,312 cubic centimeter,
liquid-cooled, 52-degree V-twin engine.
They engineered a single-pin crankshaft.
This specific design choice delivers
the authentic, uneven exhaust rumble
that American purists demand,
mimicking the heartbeat of a traditional Harley-Davidson
without the unreliability.
It transfers power through a maintenance-free,
enclosed shaft drive
and a heavy-duty five-speed transmission.
The engineers utilized a massive 38-millimeter,
constant-velocity carburetor,
providing a raw, mechanical throttle response.
The financial proposition is staggering.
The price for a brand-new unit
during its production run sat firmly at $10,000.
Today, the used price hovers around an insulting $3,000.
You acquire massive Japanese displacement
for the exact cost
of a modern, low-displacement commuter scooter.
The depreciation curve flattened completely,
meaning you can ride this machine for five years
and still sell it for a good price.
The mechanical reliability is undisputed,
but you must monitor specific flaws.
In terms of maintenance,
the factory-steering neck bearings represent a fatal flaw.
Honda utilized cheap, unsealed ball bearings
from the factory.
The massive gravitational weight of the machine
crushes them over time,
causing a terrifying front-end wobble
upon heavy deceleration.
You must replace them with tapered roller bearings.
Furthermore, because it utilizes a massive carburetor,
the pilot jets require ultrasonic cleaning
if the previous owner let the motorcycle sit unused
with ethanol gasoline.
Otherwise, the engine block is immortal.
The riding posture is built for the open boulevard.
When evaluating comfort,
the low 27-inch seat height allows any rider,
regardless of inseam,
to plant both boots firmly on the pavement.
The wide swept-back handlebars force you
into a relaxed, upright posture.
However, the rear suspension travel is minimal.
Hitting a heavy pothole at highway speeds
transfers the impact directly into your lower back.
This machine is perfect for the traditionalist
who demands heavy Japanese muscle,
unshakable reliability,
and an authentic V-twin rumble for absolute pennies.
The VT-X delivers heavy cruiser aesthetics,
but what if you demand the high-revving thrill
of a massive inline-four engine
wrapped in an invisible commuter chassis?
Number 11 hides a catastrophic torque monster.
Number 11, the Suzuki Bandit 1250S.
The modern market obsesses
over sharp, aggressive hyper-nakeds
equipped with massive digital screens.
They completely ignore the Suzuki Bandit 1250S.
Nobody buys it because it features generic,
rounded styling that blends into the background.
It carries zero prestige at the local bike meet.
It looks like a standard commuter machine,
but that boring exterior hides a catastrophic torque monster
capable of ripping the rear tire loose.
When you examine the specs,
you find a 1,255 cubic centimeter
liquid-cooled inline-four engine.
Suzuki engineered this block
to produce 80 pound-feet of torque
at a microscopic 3,700 revolutions per minute.
You never need to downshift.
You twist the throttle in top gear,
and the massive engine pulls like a freight train.
It transfers power through a six-speed transmission
and a heavy-duty chain drive.
The financial depreciation
is a massive victory for the buyer.
The price for a brand-new unit demanded $10,000.
Today, the used price plummets to an insulting $3,000.
You acquire a massive, liquid-cooled,
big-bore four-cylinder engine
for the exact cost of a clapped-out beginner bike.
The engine block is a legendary bulletproof slab of metal,
but maintenance requires specific attention.
The valve clearances require checking every 15,000 miles,
but the shim under-bucket design
is straightforward for a garage mechanic.
You must monitor the electrical stator.
The heavy torque output puts immense strain
on the heavy-duty clutch,
making the clutch lever pull exhausting
in stop-and-go traffic.
Otherwise, the engine requires nothing but basic oil changes
to surpass 100,000 miles.
When evaluating comfort, the Bandit delivers mixed results.
The upright, tubular handlebars
provide a commanding riding posture,
saving your wrist from fatigue.
The half-fairing provides adequate wind protection
for the rider's chest.
However, Suzuki utilized cheap, degrading foam
in the factory saddle.
Long highway trips require an aftermarket seat
to prevent severe lower back pain.
This machine is perfect for the budget-conscious torque junkie
who demands bulletproof inline-four power
without the flashy, expensive, hyper-naked tax.
The Bandit delivers generic torque,
but what if you demand transcontinental touring capability
wrapped in vintage chrome-heavy aesthetics?
Number 10 features a massive V4 engine hiding
in a classic cruiser frame.
Number 10, the Yamaha Royal Star Venture.
The modern touring crowd demands sleek, blacked-out baggers
equipped with Apple CarPlay and radar cruise control.
They abandoned the Yamaha Royal Star Venture.
Nobody buys it because it looks like
a massive chrome-laden relic from the 1950s.
It features a cassette tape deck on the dashboard.
It is a technological dinosaur.
Yet beneath that massive vintage exterior
lies one of the most robust, over-engineered power plants
in motorcycle history.
When you dissect the specs,
you discover a 1,294-cubic-centimeter
liquid-cooled V4 engine.
Yamaha pulled this exact engine architecture directly
from the legendary V-Max muscle bike
and retuned it for touring.
It features dual overhead camshafts
and four valves per cylinder.
It transfers power through a five-speed transmission
and an immortal shaft drive.
Instead of modern fuel injection,
Yamaha utilized four massive constant-velocity carburetors.
The depreciation represents a highway robbery.
The price for a brand-new unit sat at an expensive $18,000.
Today, the used price collapses to a mere $3,500.
You acquire a transcontinental touring fortress,
complete with hard luggage
and a massive front fairing for absolute pennies.
In terms of maintenance,
the Royal Star Venture demands patience.
Synchronizing four massive carburetors
requires a specialized vacuum gauge and a delicate touch.
If the motorcycle sits unused,
ethanol gasoline destroys the internal pilot jets.
Furthermore, the massive clutch basket produces
a distinct, high-pitched mechanical whine under load.
This whine is completely normal,
but it terrifies uneducated buyers.
The V4 engine block itself is unkillable,
routinely crossing 200,000 miles.
When measuring comfort, this machine reigns supreme.
It is a rolling couch.
The rider and passenger saddles
feature massive pillow-top cushioning
that absorbs heavy road impacts.
The front suspension features air-assisted damping,
allowing you to manually adjust the ride height.
The massive frame-mounted front fairing
punches a gigantic hole in the wind,
completely isolating the rider from highway buffeting.
This motorcycle is perfect
for the dedicated long-distance touring rider
who prioritizes supreme passenger comfort
and unkillable V4 power over modern digital screens.
The Venture conquers the highway slowly,
but what if the mission requires ballistic,
triple-digit speeds, and variable valve timing?
Number nine is a discontinued sport-touring missile.
Number nine, the Kawasaki Concourse 14.
The sport-touring segment died.
The modern market shifted entirely
toward tall, top-heavy adventure bikes.
Nobody buys the Kawasaki Concourse 14.
It is massive, intimidating,
and carries a reputation for heavy maintenance bills.
It sits rotting on the used lot
while buyers finance slow, parallel, twin ADBs.
They ignore the fact that this machine
possesses the beating heart of a hyperbike.
Reviewing the specs, Kawasaki utilized
the exact same 1,352-cubic-centimeter inline-four engine
from the legendary ZX-14R dragstrip monster.
They engineered variable valve timing
to boost low-end torque while maintaining
a terrifying 156-horsepower top-end rush.
It transfers power through a six-speed transmission
and an advanced tetra-lever shaft drive
designed to eliminate chassis jacking
under heavy acceleration.
The financial drop is catastrophic.
The price for a brand-new unit commanded $16,000.
Today, the used price plummets to an incredible $4,500.
You acquire ballistic, supercar-level acceleration,
an aerospace-grade aluminum chassis,
engineering for the cost of a used dirt bike.
The mechanical reality dictates strict maintenance.
The Concourse 14 utilizes
the KeePass keyless ignition system.
Early-generation KeePass sensors fail,
refusing to recognize the key fob
and leaving the rider stranded.
You must secure a bypass strategy.
Furthermore, executing a routine valve clearance adjustment
requires tearing the entire motorcycle apart,
dropping the massive radiator,
and navigating the complex monocoque aluminum frame.
Dealerships charge massive labor bills
for this specific service.
Evaluating comfort reveals a demanding experience.
The ergonomics provide a commanding,
slightly aggressive, forward lean,
perfect for high-speed stability.
The massive electric windscreen adjusts on the fly.
However, the massive inline-four engine
generates catastrophic thermal heat.
In heavy summer traffic, the cooling fans
blast boiling air directly onto the rider's shins,
making city commuting an agonizing experience.
This machine is perfect for the uncompromising speed addict
who demands ballistic highway passing power
and hyperbike engineering in a touring package.
The Concourse dominates sheer speed,
but what if you demand elite European suspension
and a three-cylinder engine?
Number eight is a forgotten British flagship.
Number eight, the Triumph Trophy SE.
The British manufacturer abandoned this flagship model.
Triumph discontinued the Trophy SE
after a short production run,
leaving it an orphan machine.
Nobody buys it because the market fears
discontinued European luxury touring bikes.
Buyers assume the electrical system will fail
and parts will vanish.
They leave this technological marvel gathering dust.
When you pull the specs,
you find a massive 1,215-cubic-centimeter
inline triple engine.
This specific three-cylinder architecture
combines the low-end grunt of a twin
with the high-revving smoothness of an inline-four.
It produces 134 horsepower.
It transfers kinetic energy through a massive shaft drive
and features a ride-by-wire electronic throttle.
The financial collapse is staggering.
The price for a brand new SE model
reached an astronomical $19,000.
Today, the used price crashes to a mere $5,000.
You acquire elite British engineering,
electronic suspension, and integrated audio systems
for a fraction of the original manufacturer
suggested retail price.
The required maintenance demands European discipline.
The inline triple engine requires
tedious valve clearance checks every 10,000 miles,
demanding precise shim adjustments.
Furthermore, the integrated audio system amplifier
carries a reputation for internal failure,
cutting out the radio completely.
The engine block itself is mechanically robust,
but the surrounding complex electrical sensors
require clean battery voltage
to operate without throwing diagnostic codes.
When you test the comfort,
the Trophy SE rivals the best machines on earth.
It features WP electronic suspension,
allowing the rider to adjust damping
and preload via the dashboard menu.
The massive front fairing and electric windscreen
create an absolute vacuum,
shielding the rider from all wind noise.
However, the massive fuel tank sits high in the chassis,
making the motorcycle incredibly top-heavy
at low parking lot speeds.
This motorcycle is perfect
for the luxury touring enthusiast
who demands three-cylinder British character
and elite electronic suspension on a strict budget.
The Trophy provides European luxury,
but what if you demand the pinnacle of Japanese V
for engineering wrapped in polarizing aesthetics?
Number seven, shifts with dual clutches.
We are tearing through the list of forgotten giants.
Have you ever purchased a heavily depreciated monster
that outlasted your brand new machines?
Tell me your best used market victory
in the comments below.
Keep watching because the technological masterclasses
are next.
Number seven, the Honda V FRR1200F.
The motorcycle industry rejected this machine.
Honda built the VFR1200F to bridge the gap
between superbikes and grand tours.
Nobody buys it because the styling was heavily polarizing.
Featuring a massive bulbous front fairing,
it failed to satisfy the hardcore track enthusiasts
and it failed to provide enough luggage capacity
for the touring crowd.
It sits forgotten in the middle ground.
Analyzing the specs reveals absolute engineering brilliance.
Honda utilized a 1002,
137 cubic centimeter Unicam V4 engine.
They engineered a unique 76 degree cylinder angle
to eliminate primary vibration
without requiring a heavy counterbalancer.
It produces an explosive 170 horsepower.
The buyer could choose a traditional six speed manual
or the revolutionary dual clutch transmission,
allowing seamless automatic gear shifts.
The depreciation curve is brutal.
The price for a brand new unit commanded $16,000.
Today, the used price sinks to an accessible $5,000.
You acquire a technological tour de force
featuring aerospace grade V4 engineering
and optional automatic shifting for absolute pennies.
The maintenance record is nearly flawless
with one massive exception.
Honda issued a critical global recall
for the final drive shaft universal joint.
The internal bearings would fail under heavy load,
causing the shaft to bind and lock the rear wheel.
You must verify this recall was performed
by a certified dealership.
Otherwise the Unicam V4 engine
is an unkillable high performance anvil.
Evaluating comfort exposes the design compromises.
The ergonomics feature aggressive,
low mounted clip on handlebars and high foot pegs,
putting the rider into a dedicated sports bike crouch.
The aerodynamic fairing slips through the wind brilliantly,
but the microscopic 4.9 gallon fuel tank
forces the rider to stop for gasoline every 130 miles.
This machine is perfect for the uncompromising V4 purist
who demands elite engine architecture
and sport focused canyon carving
over long distance practicality.
The VFR demands an aggressive posture,
but what if you want American heritage
powered by a liquid cooled Porsche engine?
Number six outraged the traditionalist.
Number six, the Harley Davidson V-Rod.
Traditional American cruiser purists hated this motorcycle.
Harley Davidson partnered with Porsche
to engineer a high revving liquid cooled engine.
The faithful core demographic rejected it entirely,
claiming it lacked the air cooled soul of a true Harley.
Modern sports bike riders ignored it
because of the heavy cruiser chassis.
Nobody buys it because it belongs to neither group.
Diving into the specs,
Harley Davidson utilized the revolution engine.
It is a 1,250 cubic centimeter liquid cooled
60 degree V-twin.
It features dual overhead camshafts
and four valves per cylinder.
It produces an aggressive 115 horsepower
and screams toward a 9,000 revolutions per minute red line.
It transfers power through a five speed transmission
and a heavy duty belt drive.
The financial reality provides a rare Harley bargain.
The price for a brand new V-Rod demanded $17,000.
Today, the used price hovers around $6,000.
You acquire genuine American metal,
Porsche engineering and massive drag strip performance
without paying the inflated traditional Harley tax.
The required maintenance demands
specific mechanical knowledge.
Checking and adjusting the valve clearances
on the revolution engine
requires removing the camshafts entirely,
turning a routine service
into a massive expensive labor bill.
Furthermore, the electrical stator is prone to overheating
and burning out under heavy loads.
The liquid cooled engine block, however,
is a bulletproof masterpiece
capable of sustaining heavy abuse.
When measuring comfort,
the V-Rod inflicts severe punishment.
The ergonomics force the rider
into the infamous clamshell position.
The foot controls are pushed far forward
and the handlebars require a long reach.
This posture curves your spine into a C shape,
placing catastrophic pressure on your lower back.
Hitting a heavy bump at highway speeds
transfers the kinetic shock directly into your tailbone.
This machine is perfect
for the aggressive drag strip enthusiast
who demands liquid-cooled American muscle
and completely rejects traditional air-cooled constraints.
The V-Rod dominates the stoplight,
but what if you demand unrestricted
high-speed autobahn dominance from a German flagship?
Number five utilizes radical front suspension.
Number five, the BMW K1300S.
The used market fears German engineering.
Buyers assume that high mileage European machines
will generate catastrophic repair bills.
Nobody buys the BMW K1300S
because they fear the complex electronics
and the proprietary suspension.
And they walk past this unrestricted ballistic missile
and buy slow, safe Japanese commuters instead.
Reviewing the specs,
BMW engineered a massive 1,293 cubic centimeter
inline-four engine.
They tilted the entire cylinder bank aggressively
forward to lower the center of gravity.
It produces a terrifying 175 horsepower.
They abandoned traditional telescopic front forks
and utilize their proprietary
dual-lever front suspension system,
which completely separates steering input
from suspension damping.
The price drop is immense.
The price for a brand new K1300S
commanded a massive $17,000.
Today, the used price plummets to an accessible $5,500.
You acquire elite German engineering, unrestricted top speed
and aerospace-grade chassis dynamics
for a fraction of the original MSRP.
The strict maintenance schedule dictates survival.
The engine utilizes a complex cam chain tensioner.
If the tensioner fails, the cam chain jumps a tooth
and the pistons smash into the valves,
destroying the engine instantly.
You must upgrade to the latest hydraulic tensioner revision.
Furthermore, the final drive unit
requires strict fluid changes every 12,000 miles
to prevent catastrophic bevel gear failure.
Evaluating comfort reveals high-speed brilliance.
The dual-lever front suspension
eliminates front-end dive under heavy braking,
keeping the chassis perfectly flat.
The long wheelbase provides unshakeable
straight-line stability at triple-digit speeds.
The ergonomics feature a comfortable stretched-out reach
to the handlebars,
perfect for cutting through the wind on the open highway.
This motorcycle is perfect for the precision-focused rider
who demands elite German engineering,
radical suspension dynamics
and unrestricted Autobahn-level speed.
The BMW rules the fast lane,
but what if you demand the exact opposite?
What if you want an invisible,
utilitarian Japanese inline-four
wearing a full-plastic suit?
Number four hides in plain sight.
We are uncovering the hidden gems of the used market.
If you are tired of dealership markups
and demand the truth about buying used motorcycles,
tell us, which of these heavyweights
would you park in your garage?
Debate it in the comments.
Let us continue the countdown.
Number four, the Suzuki GSX-1250FA.
The modern market ignores practical, logical motorcycles.
Nobody buys the Suzuki GSX-1250FA
because it lacks flashy marketing and aggressive styling.
It is simply the legendary bandit chassis
wearing a full aerodynamic plastic fairing.
It possesses zero prestige at the local coffee shop.
It is the ultimate invisible motorcycle.
When you analyze the specs,
Suzuki utilized the legendary 1,255 cubic centimeter
liquid-cooled inline-four engine.
It delivers the exact same massive 80 pound-feet of torque
as the naked bandit,
but the addition of the full fairing
transforms it into a dedicated sport touring machine.
It features a six-speed transmission,
anti-lock braking, and standard telescopic suspension.
The financial reality is an absolute steal.
The price for a brand new unit
sat at an affordable $11,000.
Today, the used price crashes to a microscopic $3,500.
You acquire a massive, fully faired,
liquid-cooled touring engine
for the cost of a basic laptop computer.
The engine represents absolute maintenance perfection.
The inline-four block is bulletproof,
requiring nothing but routine oil changes
and basic valve clearance checks.
However, the immense torque
requires a heavy-duty clutch assembly.
Pulling the clutch lever in heavy city traffic
requires strong forearm muscles.
Furthermore, you must inspect the electrical stator,
as early models suffered from heat degradation
under heavy load.
When measuring comfort,
this machine delivers exactly what you need.
The upright standard foot pegs and tubular handlebars
provide a relaxed, neutral riding posture.
The full aerodynamic fairing
and tall windscreen punch a massive hole in the wind,
completely shielding the rider's chest
and helmet from highway buffeting.
The heavy curb weight keeps the motorcycle planted
during strong crosswinds.
This machine is perfect
for the pragmatic, high-mileage commuter
who demands massive inline-four torque,
heavy wind protection,
and complete invisibility on the radar.
The Suzuki provides quiet commuting,
but what if you demand a massive,
American-style V-twin bagger engineered in Japan?
Number three lives in the shadows
of the Harley Electra Glide.
Number three, the Kawasaki Vulcan 1700 Voyager.
The American touring market is completely dominated
by Harley-Davidson and Indian.
Nobody buys the Kawasaki Vulcan 1700 Voyager
because it lacks the historic American badge
on the gas tank.
Touring riders ignore it,
assuming it is a cheap imitation.
They fail to realize it is a liquid-cooled,
over-engineered powerhouse.
Diving into the specs,
Kawasaki engineered a massive 1,700-cubic-centimeter,
liquid-cooled, 52-degree V-twin engine.
It features a single-pin crankshaft
to deliver the necessary aggressive exhaust rumble.
It transfers power through a six-speed transmission
with a true overdrive gear
and a carbon-fiber-reinforced belt drive.
It features a frame-mounted front fairing
and a massive integrated rear trunk.
The depreciation represents a massive financial loophole.
The price for a brand-new Voyager demanded $18,000.
Today, the used price plummets to an incredible $6,000.
You acquire a full-dress luxury touring bagger,
complete with electronic cruise control
and linked braking for the price
of a used entry-level cruiser.
The required maintenance demands specific tuning.
The belt drive system requires exacting,
laser-precise alignment.
If the rear wheel is slightly misaligned,
the drive belt will produce a loud,
embarrassing squeal when decelerating.
Furthermore, the factory electronic control unit mapping
runs the engine dangerously lean to pass emissions,
causing the rear cylinder to roast the rider's right thigh.
You must install an aftermarket fuel tuner
to cool the engine down.
Evaluating comfort reveals transcontinental luxury.
The frame-mounted front fairing completely isolates
the heavy wind blast from the steering assembly,
keeping the handlebars glass-smooth at 80 miles per hour.
The passenger seat features a massive wraparound backrest.
However, the steering geometry is heavy,
requiring significant physical effort
to maneuver through tight parking lots.
This motorcycle is perfect
for the dedicated two-up touring rider
who demands massive V-twin displacement
and heavy luggage capacity
without paying the inflated American brand tax.
The Voyager provides luxury touring,
but what if you demand the absolute pinnacle
of high-speed, shaft-driven, inline-four reliability?
Number two looks like a police vehicle.
Number two, the Yamaha FJR1300.
The sport touring crowd
demands constant technological updates.
Nobody buys the early generations of the Yamaha FJR1300
because the styling remained practically unchanged
for two decades.
It looks exactly like the fleet vehicles
used by European police forces.
It lacks the modern thin-film transistor screens
and radar systems of modern ADVs.
Reviewing the specs,
Yamaha utilized a bulletproof 1,298-cubic-centimeter
liquid-cooled inline-four engine.
It produces 141 horsepower
and transfers that kinetic energy
through a massive maintenance-free shaft drive.
It features dual counterbalancers
to eliminate engine vibration
and a massive 6.6-gallon fuel tank
for immense highway range.
The financial collapse creates the ultimate bargain.
The price for a brand-new FJR demanded $17,000.
Today, the used price for a Generation II model
hovers around $4,000.
You acquire a transcontinental missile
capable of crossing the country at triple-digit speeds
for absolute pocket change.
The overall maintenance record is legendary,
but you must address specific recalls.
The Generation II models suffered
from a catastrophic electrical ground wire failure
known as the spider bite.
The main ground harness melts,
shutting down the entire electrical system.
You must verify the factory recall harness was installed.
The engine block itself is completely unkillable,
routinely exceeding 200,000 miles.
When measuring comfort, the FJR delivers heavy versatility,
and the seat height and the handlebars
are physically adjustable.
The electric windscreen raises and lowers
at the push of a button.
However, the five-speed transmission on the older models
forces the engine to spin
at 4,000 revolutions per minute at highway speeds,
transmitting a slight buzz through the footpegs.
This machine is perfect for the iron-butt rally competitor
who demands unshakable inline-four reliability,
massive fuel range, and high-speed highway dominance.
The FJR rules the fast lane,
but what if you demand a longitudinal V4 engine
wrapped in a machine that refuses to die?
The final motorcycle is the ultimate survivor.
Number one, the Honda ST1300.
The modern motorcycle market is obsessed
with lightweight, sharp designs.
Nobody buys the Honda ST1300
because it utilizes ancient, rounded, pan-European styling.
It looks like a massive plastic spaceship
from the early 2000s.
It weighs over 700 pounds.
Buyers take one look at the massive curb weight
and walk away.
When you dissect the specs,
you find pure engineering brilliance.
Honda engineered a 1,261-cubic-centimeter
liquid-cooled V4 engine.
They mounted the engine longitudinally in the frame,
eliminating the need for a complex bevel gear
to turn the power 90 degrees to the shaft drive.
It features dual counterbalancers,
making the engine perfectly smooth at the redline.
It transfers power through a five-speed transmission
and an immortal shaft drive.
The price depreciation is a mathematical anomaly.
The price for a brand-new ST demanded $16,000.
Today, the used price crashes to an insulting $3,500.
You acquire million-mile Honda engineering
and massive aerodynamic fairings
for the cost of a basic scooter.
The maintenance record is absolute perfection.
With one minor annoyance,
the engine block is completely indestructible.
The only recurring issue involves minor coolant leaks.
The rubber coolant hoses,
located deep in the V of the engine block
underneath the massive throttle bodies, degrade over time.
Replacing them requires removing the entire intake system.
Otherwise, the motorcycle requires nothing
but basic fluids to outlast the rider.
Evaluating comfort exposes the touring reality.
The massive aerodynamic fairings
and the electronic windscreen
create a massive bubble of still air,
completely protecting the rider from rain and heavy wind.
However, that massive fairing traps
catastrophic thermal heat.
In heavy summer traffic,
the heat from the V4 engine escapes
directly onto the rider's shins and thighs,
making it uncomfortable in hot climates.
This machine is perfect
for the uncompromising high-mileage rider
who demands V4 smoothness, massive wind protection,
and an engine block capable
of outliving their grandchildren.
Click on the next video on your screen right now
to uncover the next massive mechanical trap
dealerships are trying to hide from you.
If this teardown saved you from buying a fragile plastic toy,
hit that subscribe button to join the mechanical resistance.
Stay vigilant.
Keep the rubber side down,
and I will catch you over there.
