If you are interested in creating a beautiful watercolour abstract inspired by landscape then this step by step video is for you. I explain the colours I am using, the steps I take to layer the colours and how to make the final touches at the end. You can use the same colours or experiment with different ones. This method can be used again and again to create a variety of watercolour paintings. I really hope you enjoy this video. Thank you for watching!.
Bella Edgley demonstrates how to create two landscape-inspired abstract watercolor paintings. She explains her process of layering muted colors, utilizing glazing techniques to build depth, and adding final refined details to balance the compositions while avoiding overworking the medium.
Hello, my name is Bella Edgley. Welcome to my watercolour painting channel.
Okay, so today I'm going to run through how I created these two
landscape inspired abstract paintings. I'll be showing the process of layering
the watercolours and then adding the final details.
Okay, so first a quick rundown of the materials. I've got a
Archer's cold press fine grain paper and I always have frames
to hand in my studio, although I did end up making a different frame for these
paintings in the end. Okay, so as always I've got two glasses
of clean water and then I've got a selection of brushes here.
I've got a quite large brush, medium brush and then a smaller one.
I did end up grabbing a much thinner one at the end so
as long as you've got a good selection you shouldn't go too far wrong.
Okay, so for my colours here I've got cerulean blue which I don't normally use,
Payne's grey, ultramarine and a yellow ochre.
So I did do some tests beforehand with these colours and I'm just going to
quickly show these here. I started off with this swatch in the
top hand corner and then underneath I just muted down
that yellow ochre a bit by adding it to the blues.
Okay, so that was my swatch for these paintings. Now you might want to do
yours a little bit differently but in any case it's always useful to have it
on the side. Okay, so let's get started. Okay, so it
was sort of grey on and off when I filmed this footage so
this section is a bit muted and grey but does improve as we go through.
Okay, so more or less I followed the same process for both
but not exactly so I'll show step by step
what I did for both paintings. So this is the first one and I'm just
laying down some water there at the top of my page
and I'm going to then add a bit of Payne's grey to that
and I'm putting down my Payne's grey quite watery.
Now I'm cleaning my brush and I'm just getting pure water on
it and I'm going to apply that to the top because I really want that
shape to fade out towards the top. I really want these initial layers to be
very muted and light. Okay, next I've got a thin layer of the cerulean blue and I
put that under and I actually ended up scraping some
of that Payne's grey away to make it even lighter
and dabbing away some of that in the middle. I want to keep it very light in
the middle. Now I've got my mix here of cerulean
blue and yellow ochre and I'm putting another layer in below.
I really love the way this colour turned out because
on the page the pigments kind of separate so you can see the yellow ochre
and the cerulean blue but they sort of optically mix
together and it's got a really nice texture to it.
Now I just take that away to dry and I've got it back now
and I'm going to go in with another layer of that
cerulean blue and yellow ochre mix. So adding a wet layer on top of a dry area
is called glazing in watercolour painting
and it's a really great way to build up your colours.
Now I don't want this painting to become too much like a literal landscape
so I'm going to make my shapes quite abstract at this point
and once you've got the paint in place you don't want to disturb it too much.
You don't want to sort of scrub at it, you just want to put it down and
leave it and I'm just softening that edge there
with the brush and now you can move the paint around by
moving the paper and I do want that colour to concentrate towards the middle
so I was just moving it there to make sure that I get a lot of the pigment
towards the top of that curve. Now I've got ultramarine on my brush
now and I'm going to do a curve meeting that bottom curve coming down
from the top and again I'm just laying the paint down
and I'm not going over it too many times and I'm
trying to hold my brush at the end and be quite loose about the way I'm
painting. I'm kind of liking the way this painting
is looking, I'm using my mask to see what it will look like when it's framed.
So more of the watery paint has gathered at the bottom of that
curve which means that the colour is concentrated at the
place where it meets the curve on the bottom and I really like that
so I'm just moving the paper there to make sure that it stays in place.
Okay this is done for now and I'm going to put it aside to dry
and while I wait for it to dry I'm going to get going on the next one
because I'll be adding the detail to both together at the end.
Okay so I've got my Archer's Fine Grain Cold Press paper there and I'm mixing my
to make that green and I'm just going to put in a
layer of that paint towards the bottom. I'm looking at the first one I did so
I'm going to do something quite similar and I'm trying to make that shape quite
loose and I'm not overworking it too much. I've
got some more watery paint on my brush there to make it fade out a bit towards
the bottom. Okay so next I'm going to add my Payne's
Grey, again watered down quite a bit and I'm
just going to add that shape to the top. So I'm doing
exactly the same thing, more concentrated towards the bottom
and then putting water on my brush and just fading it out towards the edge
but overall it's still very light. Okay so this isn't completely dry but I'm
going to sweep some of that Cerulean Blue over my green at the bottom.
I think for the first one I did it the other way around so
as I said these are roughly following roughly the same process but not exactly
the same and that's a nice way to test out different
effects. Okay so that was it, that was just two
paint strokes. I'm going to leave it and put it aside to dry and then I'll
get on to the next layers. Okay so it's dry and it's ready for the
next layers. Now I'm going to run through this fairly
quickly. I'm going to lay down some Payne's Grey at the top and then
once that's down I got my brush and I lifted some of it away and I'm trying to
keep these curved shapes to add an overall
harmony to the painting. Now this is actually dry now because
I've speeded the video up but I'm adding my Ultramarine in this curved
shape and I'm using the other painting as my
guide and I want the paint to collect around the bottom
so I'm going to make it quite watery and then I'm going to make sure that
paint sort of collects at the bottom of the curve
and I'm doing this by literally moving it with my brush and holding the paper
upright. So I'm just checking out the
composition with my mat and I'm going to put this green curve
towards the bottom so again that is the Cerulean Blue and the Yellow Ochre.
I'm not doing too much to it and I really like the way these colours sort
of separate so towards the bottom they're more mixed and you can see the
Cerulean Blue towards the top of that curve. Okay so
you can see from the first painting how the Ultramarine dried a lot lighter
and so for this one I'm actually going to add a bit of extra pigment down there
because I really want that kind of
concentration of colour to be exaggerated even once it's dry.
Okay so this layer is done and then I'm going to wait for it to dry
and then I'll get both these paintings to compare them and work out
exactly what details to put on top. Okay so here we have the two
paintings and the original frame that I thought I would
use is actually a bit too big so I just made another one and I just cut it out
of paper. Okay so I really like these and they
could almost be left as they are as really minimalist paintings but I've
decided to put a third layer on and I'm going to pick up on the Cerulean
Blue and just put some curves on to balance out these
compositions a little bit more. Okay so unfortunately this is a little
bit out of focus but I'm using my pencil to draw in the line
and I'm just balancing out the composition a little bit
and I'm getting my Cerulean Blue and I'm just
painting that carefully on top and I'm using quite a thin brush
to follow the line of that pencil. And that's it, I don't want to do too much to
this one, I really like the background, I don't want to cover it up too much
and I'm just going to move on to the next one now. So
I've already put my pencil lines in, two curves, one at the top and one at the
bottom and I'm doing the same thing with the
Cerulean Blue, I'm just balancing out the composition
here and where the Ultramarine in the middle
dried a lot lighter I knew that I wanted to just make this colour more vibrant so
I decided to put more Ultramarine on top and
actually I was really holding my paintbrush quite
firmly and I feel like the line wasn't as free as I wanted it to be
but at the same time I didn't want to go over it too many times, I think
sometimes with watercolour you kind of need to know when to stop and
if you like something you don't want to ruin it by
overworking it. So I decided to leave it as it was and I
was really quite happy with both these paintings.
I've really tried to break it down into steps so
I hope that if you've been following along and doing your own painting it's
been easy to follow and I would be really
interested to know if you tried something similar
and how you got on, you could use the same colours or different colours or
a combination of both, let me know how you get on in the comments
and if you like the video please hit like
and if you want to see similar videos in the future then
please subscribe to my channel. Okay thank you, bye!