CNC Machining is what we do. We are Experts and on this channel we are bringing our knowledge and experience to YOU. Want more? Learn CAD, CAM & CNC Machining through our FREE TITANS of CNC: Academy.
Join the conversation on our Facebook Group: / titansofcncacademy
Connect with us on LinkedIn: / titansofcnc
Follow our CEO, Titan Gilroy: / titan-gilroy
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial provides a comprehensive guide to designing the Titan 1M part in Mastercam. It covers the entire CAD workflow, starting from initial 2D wireframe creation and 3D extrusion to the precise placement of threaded holes, complex pocket milling, and final edge refinements, ensuring the model aligns perfectly with technical specifications.
Hey what's up everybody this is Titan, Titans of CNC and today I'm going to teach you how to design
the Titan 1M in Mastercam. Oh this is going to be good. So first thing I want to do is I
want to prompt you to actually download the documents that we've supplied. So you have
setup sheets, you have inspection documentation and the prints. The prints are what we're going
to use right now. So are you guys ready to learn some Mastercam? Let's make this happen.
All right so the first thing we're going to do is draw a rectangle. First thing you'll see is you
have three different prints. You can find the rectangle on sheet one of three of the Titan 1M
print. So it gives us the dimensions for the rectangle and the thickness of the part and
that's all we need. Okay so we're going to go up here to wireframe, click this guy, come over to
rectangle, grab this. Now I'm simply going to come down. I'm going to click right here in the center
of my work coordinates. Boom. I'm going to extend. Now here's the trick. I'm going to actually hit
caps and then when you actually look way over here you see width and height for my rectangle.
I can actually get in the position and then my width right here. I can simply hit
W. So capital W. As soon as I do that it highlights. I look at my print. I can see four inches.
There we go four inches. I'll tab down. Now I'm at height. I'm going to go negative 1.9. Now I'm
simply come back over here. I'm going to say okay. That's it. I got a rectangle. Now I'm going to right
click. I'm going to say fit. Now it simply fills up my screen with the rectangle. I'm just going to use
my scroller just to move it down just a little bit. Boom. Alright so that's a nice size. Now let's
actually make a model. So I'm going to come up here to solids. Boom. I'm going to hit extrude.
So as soon as I hit extrude this guy for chaining popped up. Okay so it wants to know what do I want
to extrude. So I'm simply going to click this guy right here and as soon as I click it because I'm
on full chain and not partial it's going to actually chain the entire box. So click it. Boom.
There you go. Alright now that is the chain that I want. So I'm simply going to say okay.
Alright so now I can actually flip it around a little bit. Move it around. So if I hit this
shift key I can just grab it, move it, rotate it. Alright so I'm looking at the thickness here and
I can see that it's at a half an inch. So I'm simply going to change it per my drawing. I'm
going to go to 0.75. Enter. And instantly you see it get thicker. Alright so that looks good.
Okay I look at my X going this direction, my Y going this direction and my Z going up and I like
it. It puts it right in the upper left corner. Now let me show you something. If I wanted this
zero to be on the bottom like sometimes we do with five axis and different parts. I could actually
hit this guy. Boom. And it just switches it. It reverses it. Alright but that's not what I want
to do. So I'm going to click it again. This is what I want. This is the direction. Everything
looks perfect. So I'm just going to hit okay. Check. And there you go. Now I'm going to right
click. I'm going to say top view. And now let's go ahead and go to sheet two of three and start
putting in the holes. So I'm simply going to come up here. I'm going to say hole. Now I'm going to look at
my print. I see 1032s and I know from my setup sheet that I'm going to actually be using a roll
tap. A form tap. And the drill size is 0.177. So that's what I'm going to use. Alright and when I
look at my depth of thread it's at 380. So I'm actually going to bypass that 380 by two hundred
thousandths. Okay. For this model. So I'm going to go 580 and it says 580 right here. So I'm already
there. Look at that. 118 is fine for the bottom angle. So I'm going to simply tab down. Tab down.
I'm going to come down here for my diameter and as we said we're at 177. Boom. Boom. For my drill
size and there you go. Now there's a top chamfer over here and we do want to chamfer our holes.
So whenever you have a thread you always have a chamfer or a lead in. So for a 1032 thread we're
going to go about 10 percent of the diameter of the thread. So the thread is at 0.190. So we're
going to add 19 thousandths to that. So that'll be 209. So 0.209. Come down. Then I'm going to use a 45
degree or also known as a 90 degree included angle chamfer to actually spot these holes to make way
for the drill. Alright. So now I'm going to hit the position. Hit this guy. Now all I have to do is
actually look at my print. Orientate the print so my zeros are in the upper left as seen in this video.
And then I'm simply going to start documenting my locations. So now the first dimension is going to
be X. All I'm going to hit is 0.15. And see this guy up here? It just pops up. Boom. So that's 0.15.
Then I hit a comma. And now it's ready for the Y position. So now I'm going to go negative 0.15.
I'm going to hit enter. And you can see this guy right here. This point just arrived. Now let's go
down here and actually put the point here. So I'm going to repeat the process. 0.15 comma negative
1.75. Enter. There you go. Now per print, let's jot this one down. So I'm going to go 1.15 comma
minus 0.3. Enter. There you go. Now let's go to this location. 2 point comma negative 1.216.
Boom. Next 2.85 comma negative 0.3. There you go. Next 3.85 comma negative 0.15. Now the last
3.85 comma negative 1.75. Now all I have to do is hit enter one more time. And there you go.
Now I'm going to grab the model. I'm going to tilt it. And now you can see the holes perfectly
in place. Alright. So now I'm going to hit the check. Done. So now let's actually go to sheet
3 of 3 and actually put the pockets in. Okay. So the first thing I'm going to do
is I'm going to go back to wireframe. And then we're going to go to offset. I'm going to drop
down. I'm going to hit chain because I want to do the entire rectangle, which is going to bring
my wireframe chain box back up. And now I'm simply going to click this guy one time and it chains the
entire rectangle, which is exactly what I want. So I'm going to hit okay. Now which side do I
want to offset this rectangle? The inside. And then if I look at my print, I can see 0.300
typical. So that means that it's typical all the way around. So I'm simply going to click here.
Boom. And there you go. You got the rectangle on the inside right here.
I'm going to go look at the distance. It actually says 500. I'm going to change that to 300. So
0.3. I can put 00. It really doesn't matter. So I'm just going to tab through it. I'm going to
hit the check. Boom. That's exactly what I wanted. Now I'm going to actually do a line down here,
which is going to position a radius for the triangle that's coming up. All right. So I'm
going to go back to offset. I'm just going to hit offset up here. And then I'm going to say
offset this line. And if I look at my print, I see the dimension is 1.65 on the lower left,
which positions itself right about here, which is going to be the center of the radius that's 0.195.
So I'm going to click this side. Boom. It gives me my line right here. I'm going to go to distance
over here and say 1.65. Enter. And it drops down here. All right. So now I have this line down
here. I'm going to simply come up here, hit the check mark. Boom. We're ready to go. All right.
So now we're going to go ahead and do the radiuses around these diameters. So I'm going to come up.
I'm going to hit this guy right here. I'm going to change the radius size to 0.313. I'm going to
tap so the diameter locks in. Now, one thing I'll point out is this lock needs to be locked right
here because I'm going to do a few different diameters and then I'm going to move on.
And I want to make sure that whatever I do is precisely at 0.313. Okay. So I'm going to come
over here. I'm going to hit this guy. And because this is locked, I can just simply come over here,
hit this guy. Now I'm going to come down and I'm actually going to change my diameter.
So what I need to do is actually come up and say, okay, create new. Now I'm going to come down here.
I'm going to go 0.188. Tab. I'm going to come down here, lock into this point. Boom. Again,
I'm going to come up. I'm going to say next. All right. Now we're going to drop in the radius down
here. So the radius is 0.195. So I'm going to change this guy. 0.195. Tab. Now I'm going to
click on the line. Just get close. Oh, see it. You get close to the center and it'll show you the
center. And then I just want to click it. Boom. Now all of that looks good. So I'm going to simply
come up here. I'm saying, okay, done. Now we're going to come in and actually do these tangent
lines coming off. Okay. So I'm going to come up here. I'm just going to hit this guy. Line end
points. Now what's really cool is I can come down and click this. Boom. So I'm actually going to
come down this way. I'm going to hit A for angle. Boom. 225 for my angle size. Tab. It locks in
place. I'm going to make sure this guy is actually locked. Come back. Click here. Now guess what?
Now I'm simply going to come and hit this guy and do the same thing. Come across. Boom. All right.
So just like the radiuses, I'm going to come up here. I'm going to say, okay. Now I'm going to
come down here. I'm going to hit 315. 315 point. And then we're going to hit this guy. We're going
to come this way. I'm going to click it. I'm going to hit this guy. Come down. I'm going to click it.
And that looks beautiful. All right. So now I'm going to come over here. I'm going to right click.
I'm going to say top. Boom. Okay. Now let's clean it up. Okay. So let's actually come up here.
We're going to hit this guy. Boom. It's going to allow us to trim and delete these lines. So I'm
going to hit here. I'm going to hit here. Hit here. Boom. Boom. Boom. Boom. Boom. Boom. Boom.
I'm going to come down here. Come down here. Here. Here. Now watch this. This whole line is going to
disappear. That guy. That guy. That guy. This guy. That little one right there. Little one right there.
Little one right there. This guy. This guy. Boom. All right. There you go. Looks good.
Now let's go ahead and do a few things. I'm going to rotate this guy up. Now it's important.
This line right here, you got to make sure it's broken. All right. See how it says break up here?
You can actually break this line to this line if it's not broken. Like if this is just
one chain going across, you can break it here. But it needs to be broken so you can actually click
around to extrude this triangle. All right. Very important. I'm going to say break. Boom.
This guy. This guy. This guy. I'll actually take this guy. I'm just going to delete it.
Then I'm going to create another line. Go from here. Unlock this guy into this guy.
Boom. Say okay. Now I'm going to go to model. Say extrude. Click this guy to this guy to this guy.
Now I'm going to click this guy. Boom. Now I'm going to accept it. And there you go.
Now it says create body. We're not trying to create a body. We're trying to cut a body. So
we're going to cut these guys. It goes right through as you can see. So I'm going to say the
distance is not 75, which would be all through. Instead it's 0.5. So I'm going to say okay.
Looks good. Check. And there you go. All right. So now the solid model is looking pretty good.
All right. So you can see the solid. You can see the wireframe. It's all kind of interlocked.
And later I'm going to show you how to actually turn the wireframe off so you don't have to look
at it. Okay. But right now let's actually go and put all the radiuses now that we have it in solid
form. So I'm going to come up here. I'm going to go fillet. Pops this guy up. So I'm simply
going to start hitting all the different places that I have a fillet. So I have a 0.195 fillet
here. Here. Here. Here. Here. I'm going to actually turn it. Rotate it. Here. Here. Here.
Flip it around. Here. Here. Here. And here. All right. So I'm going to hit the check right here.
Boom. It says 10 thousandths. So I'm going to change that to 0.195. There you go. Enter. Boom.
And everything's coming together. All right. So since we're in radius mode, let's go up here and
say, let's do another one. Now let's hit this guy. Let's hit this guy. This guy. Flip it. This guy.
Look at page one of our print and you'll see radius 0.01. So 10 thousandths. So I'm going to
okay right here. Let me change this guy. 0.1 tab. There you go. Now I'm going to accept it.
And there you go. All right. Now the only thing that we have left is actually the
chamfers around the parts. So if you look at the notes on the print, you can see that it says,
remove all burrs and break edges 10 thousandths unless otherwise specified. So that means
anything that's dimensioned, don't worry about it. But any corners that's not dimensioned,
go ahead and make a 10 thousandths chamfer and you're going to be good. Okay. So let's do that.
So we're going to come up here. We're going to hit chamfer. Now I'm going to come down. I'm going to
do this entire surface right here. So I'm going to hit the shift key, hold it down. And then all
of a sudden the whole chain comes all the way around. Same thing. I'm going to hit this guy,
but I'm going to hold the shift key down. Gets that guy. Then it gets this guy. Then down below,
I'm going to get that guy. Now I can turn it to double check it and it looks great. Okay. So now
I'm going to hit check. There you go. It's already got 10 thousandths. So that's good. So let's hit
the check mark up here. Boom. Oh man, look at it. It looks good. It looks good. Okay. So these lines
are kind of bothering me a little bit. All right. So if you come down to this little circle way down
on the bottom, down here, you can see like, if I click it, you can see the wire frame right there.
All right. I want that to disappear. So I'm going to come back over here. I'm going to go back to
solid and then come over here to levels. Now, when you look at our drawing, everything is off of
level one. Okay. You can see 30 entities right here. So what I'm going to do is actually create
another level. So I'm going to take this guy. I'm going to make it two. I'm going to tab down. I'm
going to say wireframe. I still got it in caps, but it's fine. Now, automatically you can see wire frames
up here. Now, if I bring this over, you can see visible. All right. So everything's visible. So
how do we separate the model from the wireframe? Come to this side of the screen. As you drop down,
you can come here and it says, select all wireframe entities. So I say select, boom. All right.
All the wireframe is selected. Now I'm going to right click. I'm going to click right here,
change level. So I'm going to hit that guy and this box appears and it automatically had level
two and wireframe. So I'm okay with that. So I'm going to say, okay, boom. Now I come over here,
click this, and I turned this one off. Oh man, it's gone. Check it out. So there you go. That
is how you design the Titan 1M in CAD using Mastercam. So the next video is actually going
to show you how to program the Titan 1M using CAM in Mastercam. You guys have a great day.
This is Titan. I'm out. Boom.