I Finally Did It

Mini Universe
4 followers
#MiniUniverse #Miniature #Diorama #ResinArt #TinyThings #ASMR #ResinDiorama #MiniAquarium #ReefDiorama #EpoxyArt #SatisfyingCrafts
AI Generated·May contain errors
Video Summary
AI GeneratedThe creator builds a realistic miniature aquarium using resin, epoxy putty, and acrylic. Inspired by Danny's Aquariums, the project involves sculpting a detailed reef, creating a stabilized sand base, and using UV-reactive paints to simulate a vibrant underwater environment, all topped off with a professional resin pour and a real fish tank light.
This video is sponsored by KiwiCo. More on them later.
I've wanted to get into aquariums for a long time, but I don't have much space
and I've heard that the smaller they are, the harder they are to keep alive.
But there is a way to get around that. I've actually had the idea for this
video for a couple years now. I wasn't sure if it would be interesting
to people, but after my fish portrait video that I did a few
weeks ago, I got a lot of comments suggesting that I should make my own
aquarium. So I decided to do it today. Thank you to
everyone who suggested it. As you can see, I left a little bit of
that film around the border. This will make my life a lot easier later
in the video. A channel that I have vicariously
aquariumed through is Danny's Aquariums. If you don't
know him, you should go subscribe. But I decided
that I wanted to recreate one of his aquariums.
It's the first one that I saw on his channel. That is what I am modeling
today's aquarium after. Let's get started with the rocks and the sand.
The majority of this build will be sculpted from two-part epoxy putties,
some epoxy sculpt, and some epoxy sculpt. The only difference is the brand name.
In addition to the putty, and to help get the forms started, I grabbed an
assortment of molded resin rocks from my Rosin Wrecks collection. I used
the putty in two different ways. Either to sculpt texture onto
for the rocks or for coral, or I used it as
kind of a filler, like a sticky mortar, that I could put between these molded
resin rocks and adjust their placement and layout
while the putty was still malleable. Once all of the pre-made rocks
were in position and the basic form of the rock structure
was done, I filled in all of the gaps with more putty
and began carving in some texture using some sculpting tools.
It's not a perfectly perfect replica of the rockscaped,
but it's pretty close and I'm very happy with it. So the next step is to move on
to the sand. Sand is one of those things that can
absolutely ruin a good resin pour if you're not careful, so I'll be going
through some extra steps here to make sure it's sealed as good as
possible. The first step is to cover the acrylic in a layer of Mod Podge.
This will ensure that that bottom layer of sand is firmly fixed
down to the acrylic everywhere, leaving no spots where loose sand
is underneath fixed sand. I sprinkled the sand around, making sure I had full
coverage. Most of the sand fell off in that
process, but that's okay. Once the base layer was firmly
established, I went back in and sprinkled sand over the surface, more
intentionally piling it up in some places
more than others to give it an organic look.
I then soaked the whole thing in isopropyl alcohol, followed by another
complete soak in watered down white glue. This may look like overkill, but what I'm
hoping for is the texture of sand, but the structure
of plastic. I periodically added more spritz of glue and IPA
over the next few hours, but we will not paint this until it is completely dry.
I'm guessing this is true of many of you watching, but I love learning on YouTube.
I've enjoyed learning about many skills and facts and information that I may
never use, but I'm still glad that I learned it.
The sponsor of today's video shares that love of learning, and they heard that I
was making an aquarium, so they sent some things over to help my
son learn about fish. My son asks all the time and is always
so excited when the next box of KiwiCo arrives at the door.
He loves the variety of items that they have. He's enjoyed countless hours of
playing with the things that they have sent. What I appreciate
about KiwiCo is that the toys are all educational,
they're intentional, they're well thought out, and they're also very fun.
In real time I can teach my son about which end the whale shark eats from,
even if he insists otherwise. KiwiCo has a great selection
of items for kids of all ages and then even into
adulthood. I can attest to that myself that
multiple of their items that I have received and put together I have learned
from and integrated into my own projects that you've
seen here on this channel. If you're looking to help inspire
learning and a love for exploration and curiosity in your child or a grandchild
or any child for that matter, I would recommend KiwiCo. You can go to
KiwiCo.com forward slash boylie and use the code
boylie at checkout for 50% off your first monthly credit.
And if you have little ones like me, you can get 20% off your first panda crate.
Follow the link below. Thank you KiwiCo for sponsoring today's video.
The next step in this building process was to make some coral.
I took a screenshot of the finished tank and worked my way around picking out as
many of the individual corals as I could find.
Once again I broke out the two-part epoxy putty
and this time I began working it into little balls.
From there I could shape them into whatever kind of coral that I needed.
Not all of these corals will be exactly accurate to what I see
in the photo, primarily because my sculpting skills are not to that level.
I could have tried to find 3D sculpts or sculpted them digitally myself
but I really wanted to scratch build this whole thing. And that would still be
true even if my 3D printer wasn't acting up
right now, but maybe a little less so. The nice thing about coral is that it's
organic and all it has to do is kind of resemble something organic
and then be painted in bright colors and then it'll just look like a coral
when it's all thrown together in a cluster.
Now it can kind of vaguely resemble a flower
or a nut or a brain or a cheerio in this case. Once it's all
thrown together in the end and painted pretty colors
no one will bat an eye. In addition to the coral I wanted two fish in the tank.
I wanted to include the black ocellaris from Danny's tank, which is basically a
black and white clown fish, as well as of course my orange and white
peppermint angelfish or the centripage boilii. The easiest
way I found to sculpt these was to just lay them down flat and do one side.
In the end they will be glued in place so the back is not visible.
With that the sculpting was done so I brought back the sandy base
and hit it with one final soak of watered down white glue.
Once this is dry it'll be good to go. Everything inside the tank needs time to
cure or dry so I'll set that aside and work on the
base. I found this wooden serving tray online that was just the right size
and I had a lip on it so I could flip it over and use it to mount a bracket
for this aquarium light. Like I said before I've had the idea for a resin
fish tank for a while now and I think the thing that really pushed me over the
edge in terms of being excited about this project was kind of
the discovery or the realization I could use a real fish tank light.
The effect of which you'll see in a minute. In order for that bracket that
came with the light to sit flush I had to carve away
some of the material. I just used a hobby blade and a utility knife for this
so it took a little bit of time but I got a nice clean result. Once that
had been modified I added two more holes to the bracket.
It's made of aluminum so it wasn't difficult and I screwed that in place.
That was basically it for the display base. That's a pretty simple idea
but will be very effective in the end. After a few hours I came back to the
project and the sand was still wet but by this point the epoxy putty was
firm enough to begin gluing in place. So I broke out the foam safe super glue
and I went to town. With all of the coral and the fish in place
it was really fun to see it come together. Now we just have to wait until
it's all fully cured and fully dry. I gave it a full 24 hours and everything
was fully cured and that sand was one big chunk of texture
which meant it was ready to prime. I took it outside and gave it a coat of gray
from a rattle can. Then I broke out the airbrush
and some acrylic paints and I started painting the base color of the rocks.
I wasn't concerned about any overspray getting the brown on the corals.
I'll be hand painting all of those later anyways.
I started by establishing that base color and I switched over to a dark wash
and then finally a lighter brown sprayed directly from
above which I didn't like and went over it with the base color once again.
I then switched to an off-white for the sand.
Again I wasn't very concerned about overspray.
If any of it did get on the rocks we'll just consider that bounce light.
With that the airbrushing was done and it was time to break out the wet palette.
I loaded it up with new water, a sheet of paper,
and I Gbivroyed it. I then worked my way around the reef picking out the base
colors, doing a little bit of volume building,
wet blending the base color into a slightly lighter one
but I held off on doing the highlights for now.
At this stage the corals looked pretty much how they would under normal light
maybe a little bit dull but it was time to release
the secret weapon. For all of the highlights I'll be using this UV
reactive fluorescent paint that's also glow-in-the-dark
but we won't really see that. Not only will these be nice highlights
under normal light giving a lot of fun saturation but once I
throw them under the full spectrum fish tank light
then it should really pop. You can already see here
just how much of a difference that makes. The last thing to paint were of course
the fish which were camouflaged so well I almost
forgot they were there. I added a coat of white paint to each
followed by their patterns. In case you missed the fish portrait
painting video I did a few weeks ago I explained a little bit more behind the
name of the channel and the logo so if you're curious about
that I highly recommend you go watch it. That was a really fun video to make.
With that the painting was done but because this is all acrylic paint it
will likely bleed off into the resin if it's not sealed
so I took that outside and I gave it what I thought
was a sufficient coat of clear enamel. We will find out differently in a minute
and this was the point in the build I could tear off the remainder of that
film which was very satisfying. If you hadn't
figured it out the reason that that film was still on there is so that when I
finally put these acrylic sheets into position
they would sit flush. The last thing I wanted was a little speck of sand
to prevent these from sitting properly and causing a massive leak.
As you can see off camera I trimmed down the sides to be a little bit shorter
and everything snapped together nicely. Because this is never going to be
demolded I could also use the big boy solvent
to keep the acrylic walls together. Weldon 3 is super effective
and probably could have prevented leaks all on its own
but I made sure to add some redundancy. I filled the holes at the bottom with
silicone and then to make sure that none of the
seams had any possibility of leaking I used some UV resin. I threw a
precision applicator tip on the bottle. I ran a nice thin bead on all the
horizontal seams as well as all the vertical ones on
the inside. And with that we were ready to mix up
and pour the resin. I mentioned this last week
but of the resins that I have used I found this brand
Magic Resin to be the most stable and consistent from anywhere from two
to four inches. If you're interested in that the link will be below.
I won't be adding any pigments to this batch of resin. I wanted it to be
perfectly clear as possible. That was the goal. I mixed it up for
about seven minutes. I won't show you all seven minutes
but I wanted to make sure that everything was mixed properly
so that there would be no parts of this that would cure faster than others.
Off camera I degassed it to remove all of the hidden bubbles
and then it was finally time to pour. I tended to it for a little while popping
any remaining little bubbles and making sure there were no leaks. After
that I left it to cure for three days. When I came back to it
unfortunately I found that my enamel clear coat must have missed
some of the undersides of the rocks because the brown from the rocks
seeped into the resin. That didn't ruin it but certainly
isn't the perfectly clear look I was going for. Now it just looks like a tank
that might need a water change soon which isn't the end of the world.
Finally I put some double-sided sticky foam feet on the bottom
and I stuck it in place and after that I called it good.
That is it for this video. Thank you all so much for watching. I hope you enjoyed.
Huge shout out as always to my patrons. You guys are
the best. Another thank you to KiwiCo for sponsoring today's
video. Have an awesome week everyone. I'll see you next time.
