What if the ancient Egyptians had access to technology far more advanced than we ever thought possible? What if this culture was capable of generating its own power?
It might sound like science fiction, but the truth may surprise you. Recent archaeological evidence suggests that the Ancient Egyptians could have been fully capable of generating their own electricity.
But here’s the most important question: What were they using that power for? What kinds of devices did they need to supply with electricity?
This video explores the provocative theory that ancient Egyptians possessed advanced technology capable of generating electricity. From primitive solar heating and obsidian-based power cells to the potential of the pyramids as power plants, the content examines how these energy sources might have been used for lighting, sophisticated electroplating, and the levitation of massive stones.
What if the ancient Egyptians had access to technology far more advanced than we ever
thought possible? What if their culture was capable of generating its own power?
It might sound like science fiction, but the truth may surprise you. Recent archaeological
evidence suggests that ancient Egyptians could have been fully capable of generating their own
electricity. But here's the most important question. What were they using the power for?
What kinds of devices did they need to supply with electricity?
Strap in, because this story is about to get a little strange.
Most mainstream archaeologists agree that there is evidence of primitive solar panels in ancient
Egypt. The general concept is actually pretty simple. First, the Egyptians built pools with
black tile. Then, they filled these pools with water. When exposed to sunlight, these pools
would generate considerable heat. The water would then be transported to the palaces and temples
through an intricate network of pipes. In this manner, the ancient Egyptians were able to keep
their houses warm at night. Although you might not expect it, temperatures can fall below 10
Celsius at night during Egypt's winter months. Freezing temperatures are also not unheard of,
especially in the western desert. In other words, this wasn't just a needless luxury for the
Egyptians. They really did need heating at night. But this simple heating system is only the tip
of the iceberg when it comes to the old kingdom's true technological prowess.
New evidence suggests that this culture was capable of constructing working solar panels.
Although nowhere near as advanced as our modern solar panels, these devices would have been
capable of generating more than enough electricity to power various forms of technology. But how did
these ancient Egyptian solar panels work? One of the key components was obsidian,
a black volcanic glass containing high levels of silicon and boron. The Egyptians took this
obsidian and carved shallow grooves into its surface. Next, they filled the grooves with
copper wire. When archaeologists discovered these stones, they decided to try an experiment.
They left the obsidian in the sun and measured the current. Lo and behold,
this primitive solar cell generated a small amount of electricity,
even after being buried deep in the ground for over 5000 years. The next step would be to expose
one side of the power cell to phosphorus, and the flow of current would have been possible.
Archaeologists believe that this was accomplished by coating one side with clay,
and then placing the obsidian side into hot ash, perhaps from burned wheat husks.
After 24 hours, the obsidian would be sufficiently infused with phosphorus.
The final step would have been to break off the clay and place copper wire within the grooves.
The problem is that obsidian would not have been sealed from the elements. This means that these
primitive solar cells could only work in dry conditions. Rain would have rendered them
completely inoperable, and even excessive humidity would have prevented power generation.
However, some believe that these limitations could have been circumvented with wet,
compressed sand that naturally generates its own current.
But these primitive solar cells aren't the only example of ancient power generation.
There's also the famous Baghdad Battery. This 2000 year old artifact dates back to the Parthian
and Sassanian times, and it consists of a terracotta pot, a copper cylinder, and an iron
rod. In addition, there is strong evidence that this pot was once filled with some kind of acidic
electrolyte solution, such as vinegar. Put all these components together, and you have a
functioning battery. Various experiments have shown that this primitive battery would have
been capable of generating about 1.1 volts of electricity. And then, we have the pyramids,
vast structures that many believe were essentially ancient power plants. Scientists now understand
that the Great Pyramid is capable of concentrating electromagnetic energy in its internal chambers
under resonance conditions. In fact, studying mysterious properties of the Great Pyramid may
even allow us to construct more efficient solar cells in the future. But if the ancient Egyptians
really were capable of generating power, then what were they using it for? That's the million
dollar question, and there are many possibilities. Many people suggest that it was used to power a
lighting system throughout Giza. These lights may have been found deep inside temples and palaces,
or they may have been spread throughout even the poorest areas. Some believe that these primitive
lights would have taken the form of a carbon arc lamp. The lamps seem to be depicted in Egyptian
carvings. Perhaps one of the most widely accepted theories is that ancient Egyptians used solar power
for electroplating, which is when an electric current is used to reduce dissolved metal cations,
creating a thin metal coating across an electrode. With a sufficient power source,
electroplating can create tough, corrosion-proof materials coated with gold.
And make no mistake, the ancient Egyptians were in fact capable of electroplating. In fact,
their methods for electroplating were even more sophisticated and advanced than our own.
Various studies have confirmed that even in the modern era, we cannot match the ancient
electroplating technology of the ancient Egyptians. The implication is that the ancient
Egyptians had access to some kind of power source. This is the only way they could have
achieved electroplating with a degree of precision and quality that is unrivaled even today.
But perhaps the wildest theory about Egyptian power involves the construction of the pyramids
themselves, especially the Great Pyramid of Giza. For countless years, scientists have been trying
to figure out how this massive structure was built. Mainstream archaeologists insist that
the pyramids were built using sleds, ramps, and ropes, and they also claim that the stone blocks
were cut from quarries using bronze saws and chisels. But what if the ancient Egyptians had
used some form of electrical power to construct the pyramids? One of the wildest theories involves
a so-called solar roadway. Basically, the Egyptians would lay out a path of obsidian solar cells
leading to the pyramid. The stone blocks would then be placed onto a copper sled. This would
create two repelling charges, causing the stone to hover a few millimeters off the ground.
This general concept is not unlike our modern maglev trains.
Some believe that this solar roadway could support blocks of up to 2.5 tons.
Abu Ghurab features several strange bowls that seem to be laid out in a line, and some believe
that these are levitation basins used to transport blocks of stone. Some also believe that the ancient
Egyptians could have used this power to fuel ancient power tools, which would explain the
precise cuts and considerable force needed to slice into granite and other tough stones.
Work that would have been impossible with basic copper tools.
But if all this technology was so advanced, then what happened to it? Why is there so
little evidence of these power cells and batteries in the modern era? Technology of this magnitude
may have been a closely guarded secret, and the knowledge may have been limited to just a few
priests within Egypt's secret societies. It could have been lost in Egypt's many civil wars,
as copper based technology may have been torn apart in order to build weapons. Or perhaps,
we do have evidence of Egypt's lost technology, and this evidence has simply been suppressed by
mainstream archaeology. In the end, perhaps we will truly never know what the ancients
were capable of.