Will a 125 make it? - Climbing to 12,500 ft in Colorado

Peak Pioneers
3 followers
Oct 2, 2026
AI Generated·May contain errors
12,088 feet. Holy smokes. I did not think it was gonna go up that. I cannot believe
for a 125. That's the DRT cylinder head right there with Dome C high comp, Electron Pro Carburetor.
Good stuff. What's up guys? Coming at you with a video here. I know I'm the worst YouTuber ever and
don't put out videos very often, but had such an epic day in this video. I decided to take my
YZ125X, the 2026, to a trail called Horseshoe Creek in Sargent's, Colorado, where pretty much
you are riding a long, gnarly, continuous climb from 9,200 feet up to 12,500 feet.
So the whole point was to see if I could get the 125 all the way up this trail. I've done it a
couple times on my 250X and even on that bike, it's pushing the bike in a couple sections.
There's nothing standalone feature-wise that's crazy big or technical, but it's just a very
sustained climb. Lots of load on the motor no matter what bike you're on. So this is really
just a big test to see if a 125 could do it. I am riding solo here, which is a little scary. I
typically never ride alone, especially on big mountain rides like this. This is some serious
stuff. You are very isolated. There are no two tracks or access roads. The single track is the
only way to get up to where I end up. Just had to be really cautious on not having any mechanical
issues, breaking things on the bike, and of course not injuring myself where I wouldn't be able to
ride out. So yeah, made it a little more challenging keeping the pace down, but overall I think it was
a safe bet. And if anything, it just put the bike under more stress, which gives us more questions
answered. So pretty cool. God damn it. Well, thoughts so far. The 125 would be fine, but I
cannot keep the rear wheel on the ground. The 250 with the aftermarket suspension
definitely makes more traction, so it's not an issue so long as I can hold traction and carry
momentum. But dang, stopping is not a good idea. Well, pretty good that it hasn't overheated yet.
I haven't been doing much clutch slipping, so the only times is when you hear the revs build
and I go for a zap. Otherwise, that's all throttle first gear. I'm actually quite impressed
with how well it's doing. Me, on the other hand, definitely had better days.
Oh, tree. All right, I think this is getting to the really hard section,
so I'm gonna have to hammer it pretty hard to carry momentum. Can't get the revs too low.
Unfortunately, there's, you know, a certain RPM around idle where the bike's just gonna bog.
But overall, I'm incredibly impressed.
Unreal.
Nice. Wow. Honestly, that was the most worrisome spot. There is some other gnarly stuff way up to
the top. I'm riding solo. I don't know if I'm gonna go that far today, but I am super impressed.
Even though it was the absolute limit of the power on the bike trying to slip clutch to maintain
traction but get high enough revs, the clutch feel on this is really bad and it fades really
quickly. I probably need some stiffer springs in it for hard enduro, but man, I'm just impressed
it made it up. I kind of smoked a rock at one spot, which made me lose all my speed, but I had
pretty good recovery. So yeah, wow. Overall, pretty impressed. That's the DRT cylinder head
right there with Dome C high comp, Electron Pro carburetor. Good stuff. I guess I may as well do
the whole trail. If you want your YZ125 or YZ250 to run like mine in all these videos,
the DRT head is a very important component. Of course, fueling, whether it be correcting your
jetting or running the Electron Pro carburetor like I personally like to do, fueling plus these
heads is really a game changer, as well as the high torque rad valve from Boyson for the YZ250.
That intake as well as the head combined on the 250, for example, is very substantial. It makes
the bike a lot more rideable. Of course, you've got a bunch of different dome selections. We've
got A, B, C that all run on 91 or higher pump gas. Then we've got D for 100 octane and E for
110 octane. But seriously, for how relatively low cost these components are, they truly change the
game in how your bike performs. If you've got any questions, please reach out to me, info at
bradmoto.com. If you think you know what you're looking after and you're ready to buy, you can
head to bradmoto.com. I've clearly got all these in stock and ready to ship out.
Wow. I cannot believe for a 125, what elevation are we at?
12,088 feet. Holy smokes. I did not think it was going to go up that.
It definitely got really hot at the end. Like really, really hot. Pretty severe clutch fade,
but holy crap. All right. Well, I think we're about 500 feet of elevation from the top
right at 12,000 feet. I let the clutch cool down a little bit.
Probably wasn't enough, but I think she'll make it from here.
Hell yeah. Oh my God. We made it. What's the elevation? All right. 12,450 feet.
Can barely explain how excited I am right now. Just got the 2026 YZ125X all the way up Horseshoe
Creek in Sargent's, Colorado. I can't believe how good the thing did. I'm running the high comp
DRT cylinder head, dome C, Electron Pro carburetor, 12,500 feet of what I would consider probably
Colorado's most challenging public trail. And wow, I'm just so impressed it did it.
No overheating, no points where the bike, I just couldn't get enough power out of it to get up
stuff. It was challenging. It was right on the edge. I'm not going to lie, but that's what we
do. We come out to these spots to test the products, prove the concept so you can go in
buying with confidence. The DRT cylinder head, the stock head, 100% would not have made it up this
trail. Maybe if I geared down to like 1254, but that would be horribly impractical and not very
fun. I'll be honest. I wasn't back to Michigan for a few weeks. Do some more testing down at
lower elevation, which I haven't had the chance to do yet on the 125. But yeah, I'm so glad I did
it. It feels so good. All the hard work, big props to Matt Denneke of Denneke Racing Technologies.
That's who the cylinder head brand is named after. Man, he really, really did his all with this one.
That's what years of testing and development and I'm fortunate enough to work with him. He trusts
me to manufacture and market his designs so we can bring these products to you guys and
try to get more YZs out there running to the best of their abilities.
It just feels really good to prove the functional concept of something, even when I
honestly didn't think it would actually do the job. At least not with this gearing setup.
I thought the gearing was going to be way too high to make it work.
Gosh, I can't believe that it just tractored up this whole section.
