Plant your fruit trees like this, it'll grow faster

Gardening & Growing
200 followers
Video Summary
AI GeneratedThis video provides a comprehensive guide on how to properly plant fruit trees to ensure fast establishment and long-term health. The author emphasizes that the first year is critical for root development and explains why traditional \"small hole\" planting often leads to root circling and tree failure.
They say the best time to plant a tree was 20 years ago.
But nobody talks about what happens after you plant it
when it's just sitting there, struggling.
Over the years, from running a no-dig market garden in France
to developing an off-grid homestead in Portugal,
I've killed more trees than I care to admit.
I've planted directly in hard soil,
I've planted trees in tiny planting holes
and sometimes I only wadded them once after planting
and assumed that nature would figure it out.
Turns out that is exactly why many fruit trees never really take off.
So today I will show you exactly how I plant a fruit tree
so it establishes faster, it grows stronger
and it will need less help from you later.
For years, I planted trees the way most of us do.
I used to dig a hole about the size of the pot,
drop it in and water it and then kind of like hope for the best.
The problem is that small hole can actually act like a pot in the ground.
When the roots expand, they will start hitting the edges
and start circling instead of spreading out
and the tree just never really gets going.
Or even worse, the roots start circling
and eventually the tree will strangle itself and die.
But planting the tree is actually the easy part.
What really matters is setting up the roots to succeed from day one.
Because the truth is, the first year isn't really about
what you see happening above ground.
What really matters is helping the roots move out into the soil.
So everything we're about to do is designed to make that happen.
And here is exactly how.
This right here is a brown turkey fig tree which is a classic fig variety.
Great for eating fresh from the tree with a kind of like berry honey like flavor.
Really pleasant.
And today we're going to add this beauty to our expanding food forest.
But before I even think about digging,
I spent a little bit of time choosing the location.
Because even a perfect planting job won't fix a bad location.
And I'm mostly checking for three things.
Sun, drainage and wind.
Sun is usually number one.
Most fruit trees will perform best with around six to eight hours of sunlight.
So if I'm choosing between two locations,
I will almost always pick the sunnier one.
So this is not a great location.
Then I look at water.
Trees like moisture but they don't want to sit in wet soil all the time.
So I avoid planting my trees in areas with bad drainage.
Right next to this creek in a flooding zone, not really ideal.
And finally wind.
A bit of wind is fine as it actually helps strengthen the tree.
But if it's constantly getting pushed around,
the roots take longer to anchor and settle.
And one thing I always do is imagine the tree at full size.
Right now it looks kind of small in my hands.
But in a few years it wants space, airflow and light.
This is one of those small decisions that matters a lot later.
This pot ticks all the boxes.
And once I'm happy with the location of my new tree,
it's time to start preparing the area.
Most of the time when you're planting a new tree,
the area tends to be full of grass, weeds or just overgrown stuff.
And before I start digging anything, I like to prepare the area a little bit.
In my case, this whole area used to be completely overgrown
with brambles and other plants.
And it took a brush cutter just to get it to this point.
But now I just need to rake some of the organic matter aside
so that I'm working with clean ground.
Now you don't need to make this entirely perfect.
The goal is simply to reduce the competition around the young tree
and make it easier to work.
And if this would have been a patch of grass,
ideally you will want to remove that.
This is also where I change how I think about planting.
I used to focus only on the hole itself
and make it just large enough for the pot the tree is in.
But now I'm not really thinking about the hole anymore.
And instead I am thinking about the whole area
where the roots are going to grow.
So what I do is I mark out a rough area where I'm going to plant the tree.
And I focus much more on width rather than depth.
As a general rule, I like to go at least two to three times the width of the root ball
if I have the space.
It doesn't have to be exact,
but the idea is just to give the roots room to move outward
because most of the feeder roots,
the ones that are actually taking up water and nutrients,
stay near the top of the soil and spread sideways rather than straight down.
So if we only loosen a small hole,
the tree tends to stay stuck in a little pocket longer than it needs to.
And by thinking in terms of an area instead of just a hole,
you're helping the tree establish faster from the start.
So now that we have this area marked,
it is a time to dig.
And I like to dig both wide and fairly deep here.
Not because the tree needs to sit deeper,
but because I want to properly loosen the soil
and break up any compaction underneath it.
And especially here,
there's probably going to be quite a lot of bramble roots.
As I'm digging,
I make sure to loosen the sides and the bottom as well.
I don't want any smooth compact walls around the planting area
because roots tend to hit those surfaces
and just circle around instead of spreading outward.
So I scrape and rough up the edges a bit
so that the roots can easily move into the surrounding soil later on.
And if I can,
I will also keep the top soil separate from the deeper soil while I'm digging.
It is optional,
but the top layer usually has more life in it.
So it is nice to keep it available
for when we start filling things back in.
So now that we dug our hole and scraped the sides and bottom,
we can start working on backfilling it.
And the way I look at it is pretty simple.
I try to improve the native soil and not replace it entirely.
So what I usually do is
I mix the soil that I took out with some well-rotted compost.
Half native soil and half compost works generally well for me.
And if the soil is really heavy or compacted,
you can also add a bit of course material too,
just to open the structure a little.
What really matters here is that the roots can move through it easily.
You'll often hear advice saying not to add compost to the hole
because the roots might stay in the good soil
instead of moving out into the native ground.
And I understand where that idea comes from.
But I learned this the hard way.
When you add the compost and it's mixed well with the native soil,
instead of creating separate pockets,
trees establish faster and stay healthier.
And that's really the goal here.
I like to bring the level back up so that when I place in the new tree,
it actually is sitting slightly above ground level
because a loosened soil is always going to settle over time.
And once I'm satisfied with it,
the next step is just adding a bucket of water.
In this case, a watering can.
This really helps for a few reasons.
First, it hydrates the soil.
And since everything is loosened up,
it also helps settle the soil and remove any air pockets.
Plus, it gives me a quick check on the level.
If the level drops too much,
I add a little bit more of soil into it until I'm at the right height.
That's enough for now.
Now that the water has drained and the soil is ready,
I can finally set the tree in place.
And before I start backfilling anything,
I just take a moment to make sure that the height looks right.
And what I'm looking for specifically is that the root flare,
which is where the trunk widens at the base,
sits roughly above the soil level.
I don't want the tree buried too deep
because that's one of the most common reasons
young fruit trees struggle and eventually die.
And if you're planting a grafted tree,
make sure the graft union clearly sits above the soil line as well.
You don't want that part buried.
So that's pretty good.
Once I'm happy with the height,
we can take the tree out of the container.
And this is always worth checking.
Sometimes the roots are nice and loose.
And sometimes, like this one,
they are circling around the pot and are root bound.
If the roots are wrapping around,
we need to gently loosen them and tease them outward.
This is going to encourage them to grow outwards
instead of continuing in a circle once the tree is in the ground.
And this is already much better than what it was before.
At this stage, I just want to backfill around the root ball
so there aren't any large air pockets left.
Once that is done,
light firming with the hands or with the feet is enough.
The idea is to give the roots good contact with the soil
without compacting everything that we've just loosened up.
And at this point, the tree is sitting at the right height,
properly supported by the soil and ready for the next step.
Once the tree is planted and everything is sitting right,
the next thing that I want to add is a nice layer of mulch.
This is going to protect the ground from drying out.
It helps regulate temperature and keeps the soil life active underneath it.
And especially when a tree is young,
that makes a huge difference in how fast it settles in.
I like to apply a thick layer of mulch over the whole root zone
that we prepared earlier and not just right around the trunk.
The idea is to cover this entire area so the soil stays stable and protected.
And one small thing that matters is,
it's a small detail, but it will make a big difference,
is to always keep the mulch a little bit away from the trunk itself.
I don't want it touching the bark because that can hold too much moisture
right where the tree doesn't want it.
And we can actually invite rot and fungal issues.
And now that the mulch is in place,
the soil is protected and the tree is off to a much better start.
At this point, the tree is planted and mulched
and we need to give it one deep watering
so that the soil settles properly around the roots.
And when I water, I tend to water deeply.
And not a little bit every day.
This is going to encourage the roots to go down and out in search of moisture.
So the goal is not to spoil the tree with too much watering,
but only give it a good soak when it needs it.
Now the tree has everything it needs to settle in properly.
Strong roots, protected soil and a good start.
But there's a catch.
A tree planted alone is an easy target.
When the soil around it stays bare, dries out faster
and weeds can quickly move in.
And when there's no diversity around the tree,
pests tend to find it more easily too,
which usually means less production and more work for you later on.
Trees don't like to grow alone.
They grow in relationships.
So what you plant around the tree matters just as much as how you plant it.
And if you want to see the five types of plants
that I use around any fruit tree to help it grow healthier and more resilient,
watch this video next.
In that video, I will show you how to increase production from the same area
and turn a single fruit tree into a complete food growing system.
And I'd like to know from you.
What fruit tree are you planting this season?
Let me know in the comment section below.
Thanks for watching and happy forest gardening!
