In this video, we are putting 8 of the top 6-1/2" cordless circular saws head-to-head exactly where it matters: on the actual job site. As a full-time contractor, I don't care about theoretical run times; I care about how these tools perform in the real world when cutting trim, framing, and handling daily exterior remodeling work.
I’ll walk you through an up-close overview of each saw's features, ergonomics, and build quality, followed by real footage of these tools in action so you can see exactly how they handle under pressure.
A professional carpenter evaluates several 6.5-inch cordless circular saws on actual jobsites to test ergonomics, power, and usability. After comparing brands including Makita, Milwaukee, DeWalt, Bosch, Flex, Ryobi, and Skill, the Makita saw is crowned the overall winner for its superior balance of power, build quality, and smooth operation.
Six and a half inch circular saws, which one is the best?
Well, we're gonna find out today on this episode
from Miller's Construction.
This is the six and a half inch circular saw showdown
featuring real jobsite results, okay?
So I took each and every one of these tools
onto my actual jobsites, not in a climate controlled shop
like the one we're in now.
We didn't do any rip testing or, you know, timed testing.
This entire test is just based on a real carpenter
on the jobsite, what I think about each specific saw
and the results of each specific saw.
What I like about them, what I don't like about them
and everything in between.
Let's get started with weighing them
because really in my opinion,
why else would you buy a six and a half inch circular saw
other than the weight, right?
So they're more compact, they weigh less.
That's the point of buying a six and a half inch
circular saw.
A seven and a quarter, the blade's gonna cost
a little bit less.
Typically a six and a half inch circular saw blade
costs you close to 10 bucks.
Seven and a quarter is gonna cost you.
You can get some, sometimes you can get them
for like six bucks a piece.
So, you know, a six and a half inch blade
doesn't make sense, but it's a little bit more expensive.
There's a less demand for it, right?
But what I look for is I look for ergonomics.
I'm looking for how light the saw is,
how balanced it feels in your hand,
how noisy it is, how much vibration there is,
how easy it is to follow the base plate,
how easy the guide is to kind of navigate
and see in the bright sunlight.
All of those things go into making a great circular saw.
And we've got some great circular saws here.
So once again, we're gonna go over them,
but before we even get into any of the specs or details
and my results on what I think is the best saw here,
let's just get the scales out right now.
I've got the scales turned on here
and we're just gonna weigh each individual saw
without the battery.
Because I've got some that take 4.0 batteries.
I got some with 5.0 batteries.
I mean, the Ryobi 4.0 battery is so much bigger
than say the Bosch 4.0 battery.
You know, it's gotta weigh a little bit more, I would think.
So let's just completely get rid
of that particular aspect of it
and let's weigh the individual saw.
We're gonna start with the Ryobi.
Let's see how much the Ryobi weighs.
No battery in place.
Five pounds, 13 ounces, it looks like.
Five pounds, 13 ounces.
So pretty light.
And that is with the dust extraction port
screwed on, by the way.
Some of them I have these attached, some of them I don't.
This one I didn't feel like got in my way,
so I put it on there.
Next up, the Bosch.
See how much the Bosch weighs.
Take that battery off.
Here we go.
Bosch saw, so six pounds, eight ounces.
Still pretty lightweight.
Makita next.
Here we go.
Six pounds, three ounces.
Quite a bit lighter.
Milwaukee.
Six pounds, five ounces.
Next up, the Flex.
Seven pounds, seven ounces.
The DeWalt.
Six pounds, four ounces.
Ryobi's next.
Five pounds, eight ounces.
Pretty lightweight saw.
And finally, last but not least, the Skill.
Five pounds, two ounces.
I think that's the lightest weight saw.
It also is the only saw that comes with a 2.0 battery,
and I'd upgrade that.
I would definitely upgrade that.
Now that we've got them weighed,
let's just talk about each individual saw
and what I thought about them in no particular order
other than let's get the bad one out of the way first.
This is really the only saw
that I don't think I would recommend.
This is a homeowner special,
and if you are a homeowner watching this,
there's nothing wrong with this saw
for an occasional crosscut,
even ripping some lumber, specifically plywood.
We tried to run this thing
ripping a little bit of everything,
and it just, because the battery is so small,
I think is really one of the failure points on this saw.
They should have shipped this with at least a 4.0 battery.
It just doesn't have the power.
It is extra lightweight,
and I do like the trigger lock on the handle,
so that's nice.
Let me come around there
where you guys can see this thing up close.
So the trigger lock, I like something simple like this
where you can just push it with,
if you're a lefty, you can push it with that thumb.
If you're a righty, you can push it with that thumb.
It's easy to engage the blade,
and it does have a light built into it
right above and behind the blade, which is really nice,
but the actual shoe or base plate is very flimsy,
and it's thin.
It's really thin, and to adjust the base plate,
you've just got this cheap little plastic knob.
I don't know.
I'm just not a big fan of it.
It looks like I've even lost the blade change wrench on it
just in the chaos of work.
So I don't know.
I think Skill could do a little bit better.
It is a very lightweight saw,
and I do appreciate that,
because we were, on the project
that we were demoing these saws,
we were ripping a lot of rotten sheathing off the walls,
and so we were having to hold the saws up
and above our heads, you know, sideways,
but the Skill just was not a big performer.
We did not care for it too much
just because of the pure lack of power.
I'm curious if putting a bigger battery on it
would make a difference.
Other than that, I feel like this is strictly
for a homeowner.
Next up, the Ryobi.
Now, we actually really liked this Ryobi saw,
believe it or not,
but there is one little pet peeve
that I kept finding myself a little bit irritated
or agitated at, and it's not a big deal.
When you first pull the trigger
after you haven't used it for a while,
there's a slight delay.
Let me hold it up close so that you can see it.
So watch as I pull the trigger.
There's like a half second delay for the blade.
Did you notice that?
Now that it's activated,
there's not much of a delay at all.
I don't know why it does that,
but it is kind of weird.
The blade break is really good, as you can see.
The blade stops pretty quick.
So it does have a nice blade break.
I don't think I showed that on the Skill.
It's got somewhat of a blade break.
It's not extremely fast, but it does get the job done.
Now, just comparing the Skill to the Ryobi,
there's a lot more vibration,
and this saw is much louder than the Skill.
The Skill just feels a lot smoother,
a lot less vibration in the handle.
Maybe that's because it's less powerful than the Ryobi.
I'm not sure.
We had really good success with the Ryobi, man.
I did not mind this saw at all,
other than the fact that the shoe or base plate
is ultra thin, man.
So I think, you know,
if this thing took a fall off of a ladder,
it'd probably bend the shoe.
It's just a little bit too thin.
But I do like this old school style shoe
where you've just got a couple of small notches
to indicate the curve of your blade.
I actually really, really like that.
In fact, that's probably my favorite feature about this saw.
Really easy to follow lines with, you know,
if you're not gonna watch the blade as you're cutting.
I really like that.
The bevel controls, yeah, they're okay.
It's fairly smooth and pretty easy to read,
you know, those markings on there.
It's black, black markings, so that does help in the sun.
But I don't remember even beveling with this.
The battery is weird.
The battery slides on sideways.
And what we did find is that
because it comes with a 4.0 battery,
you can see that the battery actually sticks out further
than the motor of the saw.
That's kind of irritating, okay?
So I, you know, once again,
we want a six and a half inch circular saw
because it's more compact.
By adding such a big battery
to get the performance that this saw needs,
you're a little bit wider.
And believe it or not,
we ran into a situation demoing
where that battery was the only thing preventing us
from making a clean pass,
ripping some plywood or something like that
up against a house,
maybe with some sheathing or something like that.
I can't remember, but.
It does have a light in kind of an unconventional area.
It's down here.
But we did find it handy.
So that was good.
The Ryobi really surprised us.
It was comfortable.
That delay kind of stinks,
but overall, you know, even the depth adjustment,
we really liked the depth adjustment.
I like that it puts these markings
on the outside of the guard.
To me, that's kind of a common sense thing.
Like if Ryobi can do that,
why can't all the other saw manufacturers do that?
I can remember having a saw.
I think it was a Makita way back in the day
used to do that.
I don't know why they got away from that,
but that is a huge feature to me.
Ryobi knocked it out of the park with that.
I don't have to look like, for instance,
let's try to find, here's the Milwaukee.
I have to try to look.
You can't hardly even see in there
to see your depth adjustment.
You just basically need to pull the guard back
and line it up with, you know, your sheathing.
The way the Ryobi is situated,
it's right out front where you can see exactly.
And there's plenty of indicators.
I mean, there's one inch, there's inch and a quarter,
there's inch and a half, inch and three quarter,
all those indicators for depth adjustment.
And for a guy like me that's ripping sheathing
that's already on a house,
and I'm trying not to get further deeper into it
than I need to,
I don't want to hit wires and pipes, stuff like that.
To me, that was a really nice feature.
I could quickly adjust from, you know,
cutting two by material to cutting sheathing on the fly.
The Ryobi was fantastic.
I think this was a great saw.
It's got a couple of flaws.
It is built kind of cheap, the base plate,
but honestly, I think you could get it done.
If you're already in the Ryobi platform,
I'd say go with it.
I think it's a great saw.
Other than that little bit of a delay, that's annoying.
Next up, we'll talk about the DeWalt.
This was one of my favorite saws in the testing phase,
and it's got some features that I like,
and it's got some features that I don't like,
but overall, I think this was a phenomenal saw.
Let me show you what it looks like up close.
Let me just come around.
This one came in a kit with a 5.0 battery,
which we got excellent, excellent battery life out of it.
Let's talk about the things that I did not like.
Okay, so the trigger, the trigger lock.
I don't like this style where I need to push down.
Sometimes you can get sawdust in there,
and we did a few times,
and it was starting to bind up on us,
and it's a little bit hard for me as a lefty.
I cut left-handed a lot.
I'm predominantly left-handed, but I'll use right or left.
I'm a little bit ambidextrous when it comes to saw usage.
So I like to use my left hand quite a bit,
and I know it's a blade-left saw,
but sometimes I feel like using my left hand,
and I don't know, it's hard for me to push that down.
I don't know, it's just, it's a little bit uncomfortable.
One thing we didn't talk about because they didn't have it,
the Ryobi and the Skill does not have a rafter hook,
and I love a rafter hook on a saw.
To me, it's a necessity.
It's a shame that the Ryobi didn't have one
because this one's a pretty nice one.
It is steel, and it's got a steel bracket here too.
I have had some with plastic brackets,
and the plastic kind of broke off.
So I think it's important for it to be a steel bracket
that holds that rafter hook on.
The blade depth adjustment handle or knob right here,
really, really easy to engage.
I like that.
It's a big handle,
so there's no confusion when you're grabbing it.
You can grab it real quickly and adjust.
I like that on the fly.
This saw had plenty of power.
It was smooth, comfortable.
You can just hear the power on this saw.
Of course, the motor's pretty big,
but overall, this thing felt really compact.
We got it in a lot of tight spaces.
I didn't care for the bevel adjustment too much.
You've got this little lever here,
and it was just kind of hard to see that in the daylight.
But once again, we're not cutting rafters
with a 6 1⁄2 inch circ saw very often,
so I'm not too worried about that, honestly.
I do wish that these saws would come with a guide,
like a rip guide.
We've got the knob built in for the rip guide here,
but we don't actually have the rip guide with the saw.
That's kind of annoying to me.
I like a rip guide.
Blade changes were easy.
We got our blade unlock right here.
But overall, really, really nice saw.
The depth adjustment gauge is kind of,
once again, situated.
I can't even hardly get the camera in there to see,
but it's right here, and there are several adjustments.
It's just, I don't know, that's not a great design to me.
But overall, I really, really liked the DeWalt.
This was one of my favorite saws.
Listen to the blade break.
The blade break is really fast on this saw.
I mean, it's just almost instant.
You let off the trigger, that blade stops on a dime.
Really compact, really lightweight.
Overall, this was just a phenomenal saw.
This is probably top three for me, the DeWalt saw.
Next up, we'll check out the Flex.
Now, this is the most unique saw,
and you can see that it's dirty for a reason.
It's because I'm predominantly in the Flex lineup,
so I run mostly Flex tools.
But this is probably the most unique
six and a half inch circular saw
that we're gonna look at today.
Let me show you some of its features up close.
Let me come around.
First of all, probably the most noticeable thing
is how slim it is.
Look how small the base plate is,
and that's because it's got an inline drive.
So this is called the inline circular saw.
It's a world's first.
I don't think there's another circular saw
on the market, actually,
that is inline like this, belt-driven.
So there's actually a rubber belt in here housed
that spins the arbor of the blade,
and the motor's back here underneath the handle.
Makes it really unique.
It's a unique cutting experience
because it almost kind of reminds you of a rear handle,
the way the handle is back a little bit,
but you're still kind of on top of it like a sidewinder.
I love the trigger lock on this one
where I can just press it from either side.
It does not take a whole lot of effort.
It's not a stiff spring in there.
I like that.
I can use it left-handed, right-handed.
It doesn't matter.
It's really nice.
We've got a big, massive rafter hook on top,
and I think that is plastic, but I have not had a problem.
I've been running this saw for,
well, since it came out six years ago,
and I haven't had a single problem with this saw.
Actually, I've got two of these.
You can see I've put some wear and tear on it.
We got a little bit of a giblet there
coming off the rubber,
but you get long-lasting battery life with this saw,
and it's quiet.
It's really quiet because it's belt-driven.
I also like the fact that the dust port,
you can just adjust it on the fly,
and we're adjusting it constantly.
Depends on what side of the saw that I'm on.
If I'm on the right side of the saw,
I'll pivot it to the left.
Maybe I'm on the left side of the saw.
I'll pivot that dust port to the right,
so I like that a lot.
Other features of the saw.
Let me think.
The light on it's pretty good.
The light's in a good location.
It's down here, so it shines on the blade pretty well.
Depth adjustment is in a good spot.
It's a pretty big handle,
and you can see the depth adjustment
a little bit easier than some of the other ones.
It's down here on this guard.
This is just a super unique saw,
and because it is so slim,
we have figured out that we can get this saw
in a lot tighter places
than pretty much all the other saws,
and we're remodelers.
We have to get into tight closets
and rip out flooring and stuff like that,
so it makes it really handy,
and it also runs on my flex batteries.
I'm a flex guy, so I really, really like this saw.
Bevel controls.
Hard to see the actual bevel adjustment here
in the sunlight, but it's not a big deal.
We're not beveling with this saw very much.
Anyways, because of the torque,
one of the byproducts of this
being an inline saw and belt-driven,
there's not a crazy amount of torque.
There's not as much torque as the RIDGID or the DeWALT,
definitely not as much as the Milwaukee.
This is just a smooth, good-cutting saw.
I would not use this to rip treated 2x all day, every day.
There's no way I would use it for that.
It just doesn't have the torque of the other saw.
It spins really fast, and the cut depth,
the cut depth is amazing,
so I believe off the top of my head,
it's 6 916ths.
This saw will cut as deep
as most 7 1⁄4-inch saws,
so that's another reason that we like it.
It's still a 6 1⁄2,
but because of that inline design,
I can actually cut a lot deeper in materials
than all of the rest of these,
so that's a big feature to me.
Overall, I really, really like the Flex saw.
It's smooth, it's quiet, it's comfortable, it's ergonomic.
It's got the Raptor hook.
It's got just about everything that you'd ever want.
Really, really nice saw from Flex.
Next up, let's go with the Milwaukee saw,
and I really liked this saw as well,
but there are some things
that I really did not like about the saw.
Let me show you what it looks like up close.
For one thing, it's got the same style trigger lock
as the DeWalt.
I just don't care for that.
It gets stuck sometimes.
It literally gets stuck.
It gets sawdust in there,
and maybe you haven't had that problem, but I have.
It does have the big, beefy, nice Raptor hook.
We really like that,
and it's even got a belt clip on it, which is kind of wild.
I didn't use that,
but I could see how that might come in handy.
The blade adjustment,
or the depth adjustment knob is nice and big.
I like that.
Changing the depth adjustment is pretty easy, pretty smooth,
but I can't see in there very well,
and the gauge itself is just not...
Man, you can't hardly see the numbers on there.
I don't know what all these little notches mean.
There's no indicator on there,
so I don't know.
I didn't care for that on the saw, and it was heavy.
Well, it feels heavy because it's got a big 5.0 on it,
and because several of the times that I was using this saw,
I was using it above my head inverted.
I know the Flex is pretty heavy, too,
but for whatever reason, the handle design,
the Flex feels more balanced than this one.
This one just feels heavy,
and I think it's because the motor's so big.
Okay, so the motor is large.
This is by far the most powerful saw of all of these.
Easily, no question.
The Rigid is very powerful as well, but this one is by far.
If you're looking for just raw, pure power
in a more compact footprint, definitely get the Milwaukee.
The Milwaukee is just super, super powerful.
Once again, we've got a knob for our rip guide,
but we didn't actually get a rip guide with the saw,
so that's kind of annoying.
I did like the base plate.
The base plate feels like it's magnesium,
so pretty lightweight.
It's thick.
It feels durable.
This saw feels like it could go through
a lot of beatings on a job site, and I like that.
It's rugged.
Overall, pretty good, and I do like the bevel control.
The bevel adjustment is easier to read
than a lot of the other ones, so that's nice.
We found that in the sunlight, we were able to see that,
and the positive stop.
I mean, you can actually feel the click.
Pretty nice.
It's a nice saw.
Really, really nice fence, or base plate as well, so.
Next up, we're gonna take a look at the RIDGID,
and this RIDGID is super unique.
We really liked this saw, especially the value of this saw.
Considering the price of it,
I feel like this is a really nice saw.
Let me take it around there and show you
what this thing looks like up close.
It did come with the 4.0 battery,
which is kind of hard to get off and on sometimes,
but I think that's more of a battery design flaw
than the saw itself.
This saw, we really liked because it's so compact.
The handle sits so low.
We were able to fit this into really tight places as well,
kind of similar to the Flex.
The motor does stick out a little bit further
than the Flex, obviously, because it's not an inline,
but this saw is tight, man.
We really liked it, and it's extremely powerful.
Blade break's not quite as fast, not a big deal.
I do like that the bevel controls are white,
so you can see them in the sun a little bit better.
So I did like that.
The depth controls are white,
and you can actually see those back here pretty easily.
The depth control knob is back here.
It's a little bit cumbersome, but it's not bad.
The actual foot or shoe of the saw is relatively thin.
It reminds me of the Ryobi a lot.
I really feel like it's pretty much the Ryobi.
I think it's the Ryobi shoe on the Rigid.
It's literally identical.
So I actually like parts of it.
I like these notches here, but I don't like how thin it is.
It's just a little bit thin on me.
And this one does it similar to the Rigid.
It's got that, like that delay,
got that little bit of delay with the trigger.
Once you get it rolling, it's fine.
We did also find that this one vibrates a little bit worse,
and it's loud.
It's like super loud when cutting,
which I know that could be a blade issue,
but the motor itself is really, really loud.
As far as torque goes, this thing is crazy torquey.
It rivals the Milwaukee, in my opinion.
Really fast cutting saw.
It does have a rafter hook,
but it's a really thin, skinny rafter hook.
I don't know how durable that's gonna be after time,
but we didn't have a problem with it on our job site.
As far as the light goes, it does have a light,
and it's a pretty good one.
We were using it a couple of times in some dark places.
We didn't have any problems with it.
The dust shoot shooting out the back,
I actually really like that.
It kept the dust kind of out of my face.
When the wind was blowing, it kind of blew behind you.
So I actually really like the location
of the dust port on the back there.
Pretty doggone good saw,
and let's not forget the actual trigger lock.
It pushes left or right.
I like that.
That's my preferred design.
If they're gonna put these stupid locks on the trigger,
at least make them really fast and easy
and make them to where sawdust doesn't jam up in there.
RIDGID did a good job with that.
You can just push it left or right,
no matter if you're left-handed or right-handed.
Pretty good saw from RIDGID.
We really liked this one.
Next up is the Bosch,
and there's some things about the Bosch that I really like,
and there's a few things that I didn't care for,
but overall, the Bosch was actually really impressive.
Compact little dude, it's not bad.
No rafter hook, though, that I can find.
First thing that kind of might stick out to you
is the dust port.
So the dust port is on the back
and it's kind of pointing down.
I actually liked that, kind of similar to the RIDGID.
It keeps the dust behind you and not in front of you, okay?
We never really had a problem with it,
and you can adjust it where it shoots out to the side,
but we kept it down for a little more compactness.
The blade depth adjustment,
really easy, really big knob.
We really like that.
You can hear it winding up.
Extremely smooth motor on this thing.
Very little vibration.
The handle's really nice and robust.
We got actually pretty good runtimes
out of the included 4.0 battery from Bosch.
I think they've got a pretty good battery system.
My favorite feature of this saw,
the fence or the, not the fence, the shoe.
I don't know what you call this thing, the shoe guide.
It's white notches on black.
You can see this in the middle of the sun
and same for the bevel controls.
It just shines in the sun.
You can see whatever you're wanting to bevel to.
You can see it really quick and easy.
I love that feature of this saw.
Really, really nice.
It also does come with the included rip guide nut,
but once again, we did not get a rip guide with the saw.
The handle's a little bit funky.
It kind of protrudes back a little bit,
which, I don't know, that kind of makes the saw
want to tilt down a little bit,
so balance isn't the best with this saw.
But overall, I feel like it's a pretty compact saw.
We have plenty of power with this saw.
It does have a light, but it's tiny.
Let's see, where's it at?
There it is.
You have to really look for it.
It's way up underneath there.
Let me, there you go.
You see that?
See that light up?
It's way up.
It's up underneath this handle right here,
and it's just one little bitty tiny stick of light.
It was enough in dark situations,
but I would have liked for it to have been more.
But overall, Bosch did a pretty doggone good job
with this saw.
We really liked it other than, you know,
the balance wasn't the greatest.
I think that's probably my biggest complaint,
and if that's all I've got to complain about,
I'd say this is a pretty doggone good saw.
If you're in the Bosch lineup,
this is probably the one you're gonna wanna get.
It's not bad.
Finally, that brings me to the Makita,
the last saw of our test, and my winner.
This was my winner pick, man.
I think this is probably the best
six and a half inch circular saw on the market.
It's definitely the best saw out of all of these,
in my opinion.
Let me show you why.
Let me get you up close on this thing.
First of all, the rafter hook is just a beast
of a rafter hook, man.
This thing, solid steel.
It is clipped into plastic,
so I don't know how durable that is,
but we didn't have a problem with it.
But I like the location of the rafter hook a lot.
We've got white notches on black.
Same for the bevel guide,
so you can see it in the sun really well.
It's extremely lightweight.
The balance is pretty good.
It might be just a little bit front heavy, but not bad.
Loads of power.
We got tons of cuts out of 150 charge.
This is just a great saw.
I do love this massive teal handle here
on the guide or the protector right here,
whatever you call that thing.
I love that.
I did not like the trigger lock.
It's that old style where you gotta push down.
We had sawdust get in there.
It was kind of binding up a little bit.
I love that these Makita tools have a battery indicator
that lights up just when you pull the trigger.
So you pull the trigger.
It's real easy to just kind of look down
as you're cutting like,
oh man, I'm down to one bar of battery life left.
I better change the battery.
I like that.
We had plenty of power, plenty of control with this thing.
The depth adjustment was really quick and easy
with a nice big rubber handle.
And then I like this.
You've got white on black once again,
and it's pretty easy to figure out, you know,
your depth adjustment right there.
You can see it pretty easy, of course,
onboard blades or blade change adjustment
right there as well.
Overall, just a fantastic saw.
And it's so quiet, man.
Really quiet and really smooth,
like literally zero vibration in the handle.
Really fast blade break.
There's a great saw all the way around
and you've got a rip guide handle or a lock in the front.
And you've even got one on the back if you needed it.
So that's kind of cool if you had one
that's like takes a double.
Just a great saw all the way around.
This was my winner.
If you want the very best six and a half inch,
I think this one's gonna have to be the one.
It's got a brushless motor.
It's quiet, it's smooth.
We just, we kept reaching for this saw so many times
because it was so easy to use.
I think, especially if you're like a beginner,
you could really cut some stuff with this saw.
And the blade that comes with it is not bad either.
Some of these come with garbage blades.
I know that's not a big deal.
You can always change the blade out,
but everything about this saw was pretty doggone good.
We really liked it.
Well, I hope you enjoyed the video.
All of these tools,
the links to them will be in the description down below.
Most of these tools you can get from AcmeTools.com.
That's where I get most of my stuff.
They got really fast shipping and they've got great prices.
So definitely check that out.
I really try my hardest to showcase the tools
on actual jobsites, actual jobsite use,
and what I think of them as unbiased as possible.
I think it's obvious here.
I'm a flex guy.
I love flex tools.
I run flex tools like crazy,
but I felt like the Makita was a better built saw, okay?
It's a little bit smoother.
It's a little bit quieter.
It's definitely got more torque and more power.
I just had a more enjoyable experience with the Makita saw.
Does that mean that the Flex or the Milwaukee
or the Bosch is bad?
No, those were really good saws as well.
The DeWalt was really, really nice.
But if you're gonna have to pick one saw,
say, okay, doesn't matter what battery platform I'm on.
Tell me what the very best six and a half inch saw is.
You gotta go with the Makita, man.
It's available at Acme Tools.
They got a pretty good price on it right now too.
So definitely check that out.
If you enjoy videos like this,
where I'm showing you this raw footage on jobsites,
us working, actually testing these tools
in real jobsite conditions,
definitely check out some of my other videos.
We got a lot of these that we're working on
and we've got some that we've already done.
We've got a framing nailer test.
We've got a jobsite toolbox test,
where we took stack packs and even the new Makita Mack Track.
We took them to the jobsite and used them.
Check out my other videos.
Hit the like button if you enjoyed this one.
It really helps the performance of the video,
helps me to bring you more videos like this one.
And definitely consider subscribing
if you're into tools or carpentry related videos.
I appreciate you tuning in
and we'll see you on the next one.