Ford just deleted the 2.7L EcoBoost from the 2027 F150, and the replacement engine comes with a catch most coverage is glossing over. This video breaks down what the leaked dealer order guide actually confirms about the 3.0L EcoBoost swap, what it doesn't, and why a bigger horsepower number might not mean a more reliable truck.
We cover the outgoing 2.7L EcoBoost F150, the new 3.0L EcoBoost pulled from the Explorer and Bronco Raptor, the returning 5.0L Coyote V8 on King Ranch and Platinum, and where the 3.5L EcoBoost and PowerBoost Hybrid land in Ford's 2027 lineup.
If you're weighing a used 2.7 EcoBoost F150 against waiting on the 2027 model, stick around for the buyer's verdict most videos on this topic skip entirely. Subscribe so you catch the full spec breakdown the moment Ford makes any of this official, and drop a comment with which engine you'd actually trust past 150,000 miles.
A leaked 2027 Ford F-150 order guide suggests the highly regarded 2.7L EcoBoost engine will be replaced by a 3.0L EcoBoost. While the 3.0L may offer more power, concerns exist regarding its long-term reliability compared to the 2.7L's specialized construction and dual-injection system.
Ford may be about to retire one of the most trusted engines it's ever put in a half-ton truck,
and replace it with something that raises real questions about long-term reliability.
According to a leaked 2027 F-150 order guide that surfaced in late July, the 2.7-liter EcoBoost
is listed as deleted, gone from the trims where most buyers actually bought it. In its place,
a 3.0-liter EcoBoost borrowed from the Explorer and Bronco Raptor lineup.
but also a different injection system, and that matters more than the spec sheet suggests.
We're going to walk through what the 2.7 actually was, why it earned its reputation, what we know
and don't know about the 3.0, and whether this is a genuine upgrade or a tradeoff that's going
to cost some buyers down the road. If you care about what's actually under the hood of your next
Ford, not what the brochure says, subscribe now. That's what this channel is built for.
What made the 2.7 different? The 2.7-liter EcoBoost has been in the F-150 since 2015.
That's over a decade in production, and by the time the second generation arrived in 2018,
Ford had worked out most of the early issues. The engine that came out the other side was
something genuinely well-engineered. Small displacement, twin turbos, and a block
construction that's more common in diesel engines than gas ones. The upper portion of the 2.7's
block is cast from compacted graphite iron, CGI, the same material Ford uses in the 6.7-liter
Powerstroke. It's significantly stronger and stiffer than aluminum, which means it handles
boost pressure without flexing the way an all-aluminum block does under load. That matters
in a turbocharged engine. The tighter the block, the less it breathes under pressure. Less flex
means better ring seal, better oil control, and an engine that holds up over higher mileage.
The second-generation 2.7 also added port injection alongside direct injection. Dual
injection. That combination means fuel washes over the back of the intake valves on the port side,
keeping carbon deposits from building up. It's the same reason the second-gen 3.5 EcoBoost
cleaned up its act. The addition of port injection made a real-world difference at 100,000 miles and
beyond. The result was an engine that ran at 325 horsepower and 400 pound-feet of torque,
felt quicker than those numbers in real driving, got better fuel economy than the 3.5, and,
when maintained properly, proved itself to be one of the more durable turbocharged gas engines Ford
has built. It wasn't perfect. Early 2015 through 2017 trucks had plastic oil pans sealed with RTV
instead of a proper gasket, and that caused problems. There was a recall, Ford Recall 24S55,
that covered certain 2.7 and 3.0 engines in multiple models for intake valve fracture risk,
so it wasn't trouble-free. But the second-generation 2.7 in the 2018 and newer F-150
built a strong track record. What the order guide actually says. Before going further,
let's be clear about what we're working with. A preliminary order guide dated July 30,
2026, was posted to the F-150 Gen14 forum. It was picked up and reported by Ford Trucks,
Ford Authority, Car and Driver, and several other outlets. The guide lists the 2.7-liter EcoBoost
under Deleted. It lists a new 3.0-liter EcoBoost V6 with option code 99C as the replacement.
Ford has not officially confirmed this. The power figures in the order guide are listed as
PBD, To Be Determined. So when you hear someone say, the 2027 F-150 is definitely getting a 400
horsepower 3.0, that's speculation based on what the engine makes in other applications.
It is not confirmed for the F-150. What the guide does confirm is the scope of the change.
The 3.0 becomes the standard engine on XL, STX, and XLT trims, and on certain Lariat
configurations. The 3.5-liter EcoBoost, the 5.0-liter V8, and the PowerBoost Hybrid
remain in the lineup. The Raptor keeps its high output 3.5. The guide also shows the 5.0-liter
Coyote V8 becoming available on King Ranch and Platinum for the first time in years. That's
move toward giving V8 buyers more options at the top of the lineup, and it's worth noting that Ram's
HEMI revival and GM's continued V8 push may have accelerated that decision. Coming up, the one
technical difference between these two engines that doesn't get enough attention. Subscribe so
you don't miss it. The 3.0, same family, different choices. Both the 2.7 and 3.0 come from the same
engine family. Ford calls it the Nano Series. They share basic architecture, a 60-degree V6 layout,
twin turbos, and a compact design built around high-pressure direct injection. The 3.0, same
family, different choices. Both the 2.7 and 3.0 come from the same engine family. Ford calls it
the Nano Series. They share basic architecture, a 60-degree V6 layout, twin turbos, and a compact
design built around high-pressure direct injection. But they're not the same engine with a bigger bore,
and the differences are where the real questions are. First, block material. The 2.7 uses that CGI
upper block. The 3.0, as it's currently used in the Explorer ST and other applications, appears to
use an aluminum block. There's some conflicting information in technical forums on this point,
and Ford hasn't published a spec sheet for the F-150 version yet. But if the F-150 variant carries
over the Explorer's aluminum construction, you're giving up the structural advantage the 2.7 was
known for. Second, injection system. The 2.7 in the F-150, since 2018, uses dual injection, both port
and direct. The 3.0 in the Explorer ST uses direct injection only, no port injection. That means no
fuel washing over the intake valves, which means carbon buildup is a real concern at higher mileage.
Now, we don't know for certain what injection setup the F-150's 3.0 will use. Ford may add
port injection for the truck application. They may tune it for regular unleaded instead of premium,
which changes the output picture. None of that is confirmed, but based on what the engine is
in every current application, if you drop it into the F-150 without modification, you're getting an
engine that runs hotter, requires premium fuel to hit its rated power, and doesn't have the
valve washing benefit that made the second-gen 2.7 cleaner long-term. In other words, the headline
number may go up. The reliability calculus may go in the other direction. Why Ford is doing this?
The honest answer is that Ford hasn't told us. So what follows is informed reasoning,
not confirmed strategy. One likely factor is production consolidation. The 2.7 is a truck-specific
variant that requires its own supplier agreements, calibration work, and parts supply chain. The 3.0
already powers the Explorer, the Aviator, the Police Interceptor, and the Bronco Raptor.
Consolidating around one engine family simplifies manufacturing and reduces cost. There's also
reporting that the full F-150 redesign was delayed, possibly by tariffs and aluminum supply issues,
and that supplier contracts for the 3.0 were already signed and couldn't wait another year.
That would explain why a mid-cycle engine swap is happening before a full generation change. And yes,
there's a profit angle. The PowerBoost hybrid offers better EPA numbers and higher transaction
prices. If the base 3.0 comes in at a price point that nudges buyers toward the hybrid,
that's a better margin outcome for Ford. But that's speculation, not evidence. What's clear
is that Ford is not moving away from turbocharged V6s. The V8 coming back to King Ranch and Platinum
is a market response to Ram and GM, not a sign that Ford is abandoning the EcoBoost direction.
The final section is the one that matters if you're in the market right now. What should you
actually do? Subscribe. This is the kind of guidance this channel gives every week.
Buyer's Verdict. If you want the 2.7, go find one now. A clean, well-maintained 2020-2023 F-150,
with the second-gen 2.7, is going to be a known commodity at this point.
Enough of them are in the wild, enough have rolled past 150,000 miles, and enough owners
have reported back that you can make an informed decision. You're looking at a truck built around
an engine that proved itself. The CGI block, dual injection, and relatively simple, for a
turbocharged engine, architecture make it one of the more defensible long-term choices in a gas
half-ton. At current used prices, that value proposition is real. If you're committed to
buying a 2027, wait for the full confirmed spec before deciding on powertrain. We don't have
official horsepower numbers, we don't have confirmed injection system details, and we don't
have any real-world reliability data on the 3.0 in a truck application. The engine makes 385 to
415 horsepower in other applications, on premium fuel, whether it comes detuned for 87 octane in
the F-150, whether it gets port injection added, whether the block material changes. Those are
questions that aren't answered yet. Buying a 2027 with the 3.0 on day one means being the first to
find out. If you want zero turbocharged uncertainty, and you're buying new, the 5.0 liter
Coyote is now available on more trims than before. It's a naturally aspirated V8 with a long track
record. It's heavier on fuel, it doesn't tow to the same peak numbers, but it also doesn't ask
you to trust a turbocharger to go 200,000 miles. Some buyers sleep better with that trade-off.
That's a legitimate position. For high mileage reliability in the new lineup, before we have data,
the 3.5 EcoBoost in its second gen form is the more proven choice. Dual injection, aluminum block,
known maintenance patterns, and a large enough sample size that you're not guessing. Ford's
engine strategy has always been about trade-offs. The 2.7 was a trade-off too. Smaller displacement,
higher engineering complexity, big reward for buyers who maintained it properly.
What we can say right now is that the 2.7's replacement is not a straight upgrade in
reliability terms. It may be more powerful. It may ultimately prove to be just as durable,
but it's a different set of trade-offs, and until real-world data exists, that uncertainty belongs
in your buying decision, not hidden from it. When Ford officially confirms the 2027 powertrain specs
and pricing, we'll do a full breakdown. Until then, the order guide tells us the direction.
It doesn't tell us the destination. For a detailed look at what separates the second-gen 2.7
from the 3.5 in real-world ownership, that video is linked in the description.
Subscribe for the 2027 F-150 full-spec breakdown the moment Ford makes it official.
Everything on this channel is built for buyers who want the real story, not the marketing version.