The EASIEST knitted diagonal SHAWL "Don Valley Butterfly". SYMMETRICAL triangle. ICELANDIC bind off.

THE DIY IDEAL
11 followers
#Knitting #KnittingTutorial #KnitShawl #DonValleyButterfly #ShawlKnitting #EasyKnitting #BeginnerKnitting #KnittingForBeginners
AI Generated·May contain errors
Video Summary
AI GeneratedArina Revo demonstrates how to create a symmetrical triangular shawl using a relaxing, measurement-free knitting method. The project is versatile, accommodating various yarn weights and colors, and is ideal for using up leftover yarn. The tutorial covers everything from the initial cast-on to specialized stretchy bind-off techniques.
Hello, my name is Arina Revo. Welcome to my channel. In today's video I'll show you how you can make
a symmetrical triangular shawl. I like this project very much because it's very relaxing,
you don't need any measuring and you can use any kind of yarn. You can use very fine yarn,
fingering weight or you can use very thick yarn and it will always turn out.
It's also great for using up your leftover yarn as long as the yarn is of the same weight.
Then you can mix and match different colors and you can have a very interesting design,
very nice interesting color combinations or you can have it monochromatic like I have.
Let me show you how it looks on me. Let's try it on. So this is how I wear it and I wear it
under my coat or I can wear it on top of my jacket like this and also I like to wear it like this.
So if you like this shawl, if you like the style of it, then stay with me and let's see how it's
made. I use about 800 yards of DK fingering weight or sock yarn. Here are the tools that I used
and these are the approximate sizes of my shawls. You can cast on anywhere between one and three
stitches. Here I'm going to cast on three stitches using a long tail cast on method.
Now I turn my work around and make sure that my working yarn is under the left needle tip
and behind my work and I'm going to knit the first row. The first row in this case
consists of three knit stitches. Now again I turn my work around
and make sure my working yarn is under the left needle tip and behind my work. Now I will start
increasing and you can use any method you like. You can use kfb or yarn over but I'll show you
another way. I'm going to knit the first stitch and then I will knit the second stitch twice.
First into the stitch below or it's called into the right loop. So I place that stitch
onto the left needle tip, make a knit stitch and knit all the remaining stitches as knit stitches.
So I have one increase. Then I turn my work around and place the working yarn under the
left needle tip behind the work and in this row I will slip the first stitch knitwise,
knit the second stitch, tighten the first two stitches and knit the remaining stitches.
Now I turn my work around and place the working yarn under the left needle tip behind the work
and at this moment I like to use a marker to remember which side is with the increases
and I'm going to make another increase. So I will knit the first stitch and then knit
into the stitch below, into the right loop like this. I place the stitch on the left
needle tip just for convenience and knit a stitch and then work the remaining stitches
as knit stitches. Again I turn my work around, place the working yarn under the left needle tip
and behind my work and this side is without increases. I slip the first stitch knitwise,
make a knit stitch, tighten a little bit the first two stitches and work all the stitches
as knit stitches. Again turn around, place the working yarn behind the left needle tip
and this is the side with the increases. Knit the first stitch and then knit into the
second stitch twice, into the right loop, place on top of the left needle tip,
knit stitch and work all the remaining stitches as knit stitches. Again turn my work around,
this side is without increases. I slip the first stitch knitwise, knit the second stitch,
tighten the first two stitches and work all the remaining stitches as knit stitches. Turn around,
this is the side where I make increases,
first stitch is a knit stitch and then I knit into the right loop, place the stitch below
onto the left needle tip, knit and knit all the remaining stitches. Turn around,
this side is without increases, I slip the first stitch knitwise,
knit the second stitch, tighten a little bit and knit all the remaining stitches.
Again I turn around, this is the side with the marker and from time to time I like to move my
marker a little bit higher so I remember where I make my increases. I don't have to think about it
which is very nice. So here I knit the first stitch and then knit into the stitch below,
I just pull it, place onto the left needle tip,
make a knit stitch and work all the rest of the stitches as knit stitches. Again turn my work
around, slip the first stitch knitwise, knit the second stitch, tighten the first two stitches
and finish all the stitches as knit stitches. I'll just show you one more time.
Knit the first stitch and then the stitch below, place onto the left needle tip,
make a knit stitch and knit all the rest of the stitches. This is how my sample looks.
The side with the increases is moderately stretchy, cotton is not very stretchy but
when I work in wool it's quite stretchy and the edge is defined but it doesn't stand out too much
and that's the other side and you can always check by folding the triangle and
just checking that the sides are of the same length and you know that your triangle is symmetrical.
If not you can switch to a different needle size, just go one size up or down and here I
wanted to show you also another project. I started a shawl for my mom that's four colors,
she's a brunette so she likes pinks, purples and I'm checking that my triangle is symmetrical
and that's the other side and this is a typical garter stitch edge and this is how the tip looks
like. I leave the last three stitches of the last row to shape a corner. I'm going to knit
three together. I first knit two stitches and then pull the resulting stitch through the last
stitch of the row and place it back onto the right needle tip. I turn my work around and
I will need to place my working yarn behind my work so what I will do
I will slip the first stitch of the left needle tip and move my working yarn
to the back of my work and return the stitch back on the left. For binding off I will be using an
Icelandic bind off technique, a stretched version and another good method would be a traditional
chain bind off. So what I do, I insert my right needle tip right to left into the first stitch
and left to right into the second stitch. It's a little bit difficult with cotton because it
doesn't stretch at all but it's a breeze with yarn made of wool or any stretchy fiber
and I make a stitch and place it back on the left needle and again I insert my right needle
from right to left in the first stitch and left to right in the next and make a stitch
and return it back onto the left and I make sure that I pull my work down with my left
thumb and index finger so that my stitches are stretched.
It's important because this edge should be very stretchy. I'm going now to shape the other corner
so I'm going to knit the last three stitches together. First I knit two together
inserting my needle from right to left and then I will pull the resulting stitch
through the last stitch in the row and cast off the last stitch. Next I'll show how I do it with
a hook and it's much easier with the hook especially when you work with cotton and other
non-stretchy fibers. So instead of knitting the last three stitches I slip them
onto the right needle tip, turn my work around, I insert my hook into the three stitches
and then pull the working yarn through the stitches and also I move the working yarn
behind work at the same time and return the resulting stitch onto the left needle tip
and again it's important to keep the stitches stretched because we need this bind off
row to be very very stretchy and I repeat the same steps as I did with the needle
only with the hook. So I go from right to left into the first stitch
and left to right into the next stitch and pull the yarn through and keep the stitches very stretched
we need a very elastic edge here. Again right to left, left to right and pull the yarn through
and return onto the left needle tip. Now I'm going to shape the last corner and I'm going to
knit these three together with a hook and if you started with two stitches then you probably want
to do two stitches together or if you started with a single stitch then you don't really need
to do this at all, you can just finish the last stitch
