These are 10 of the most expensive logging skidders on Earth — massive forestry machines built to move enormous volumes of timber through mud, steep slopes, swamps, and brutal terrain. From the Weiler S350 and John Deere 848L-III to the Caterpillar 555D, Tigercat 632H, John Deere 948L-III, and six-wheel bogie monsters like the Tigercat 625H and 635H, each machine represents the extreme side of modern logging. But number one is in another league: the Tigercat C640H Clambunk, a massive six-wheel machine that lifts entire loads of logs off the ground instead of dragging them. Discover the horsepower, weight, grapple capacity, technology, and incredible prices behind these forestry giants.
This video showcases the most massive excavators ever engineered, tracing the evolution from vintage electric shovels to modern hydraulic giants and bucket-wheel excavators. It highlights the extreme scale, horsepower, and specialized designs required to move hundreds of tons of earth, featuring legendary machines that push the boundaries of heavy engineering and land-based machinery.
Imagine a machine so massive it's taller than the Statue of Liberty,
heavier than 8,000 cars, and it eats an entire hillside for breakfast.
This one scoop could swallow 12 cars whole. This one is longer than three football fields.
And some of these beasts were built 60 years ago, decades before the world was ready for them.
Today I'm counting down 10 excavators so insanely powerful,
engineers had to invent brand new technology just to build them. Let's go.
Number 10. Bucuris Erie 1850B, Big Brutus. We're starting in a tiny town in Kansas,
because that's where you'll find a 16-story metal monster that everybody just calls Big Brutus.
Officially, it's the Bucuris Erie 1850B, an electric power shovel built between 1962 and
1963. And when it went to work, it was the second largest electric shovel of its kind
operating anywhere on earth. Think about that. This thing cost $6.5 million back in 1963.
And remember, that's 1963 money, when a brand new house cost around 12,000 bucks.
Let me put the size in perspective. Big Brutus stands 160 feet tall to the tip of its boom.
Its operating weight with ballast is around 11 million pounds. And the bucket on the front,
it could scoop up 90 cubic yards of dirt and rock in a single bite, about 150 tons at a time.
That's more than most people move with a fleet of dump trucks in a whole shift in one scoop.
To feed a machine this hungry, Big Brutus ran on electricity, drawing thousands of horsepower and
peaking at something on the order of 15,000 horsepower under heavy load. It spent its life
clawing coal out of the ground for the Pittsburgh and Midway Coal Mining Company in southeast Kansas.
Here's the wild part. Big Brutus was so expensive to run that when coal prices dropped,
they didn't scrap it, they just turned it off and walked away. And instead of cutting it up for
metal, the local community saved it. Today, it's a museum in West Mineral, Kansas, and it's even
listed on the National Register of Historic Places. Number nine, Komatsu PC-8000. Now let's
jump to the modern era with a machine that hides a secret in its bloodline. The Komatsu PC-8000 is
one of the biggest hydraulic mining excavators on the planet, tipping the scales at roughly 750
tons in shovel form. But here's the twist. This Japanese giant is actually German at heart.
The PC-8000 started life as the D-MAG H-685, D-MAG being a legendary German heavy equipment
maker. When Komatsu bought D-MAG's mining division, they inherited the design, slapped their name on it,
and the D-MAG H-685 became the Komatsu PC-8000. Even its smaller brother, the PC-5500,
is a rebadged D-MAG H-455. So what makes it a monster? The PC-8000 carries a bucket around 42
cubic meters in size. Picture a scoop big enough to park a couple of cars inside it. To swing that
kind of weight, it runs on twin Komatsu SDA-16 V160 diesel engines, producing a combined output
of roughly 4,000 horsepower. And if a mine prefers to plug it into the grid, there's an electric
version powered by two 1,450 kilowatt motors instead. The whole reason a machine like this
exists is trucks. Modern mining haul trucks can carry 240 tons or more per load, and you can't
fill those with a normal digger. You'd be there all day. The PC-8000 was built to load those
giants in just a handful of passes, over and over, all day, every day. And it's an absolute workhorse.
You'll find PC-8000s digging in the copper mines of South America, the coal pits of Australia,
and the brutal oil sands of Canada, where the ground is so abrasive it chews ordinary equipment
to pieces. Number eight, Lerber R9800. At number eight, we've got a machine from a company famous
for going absolutely all-in on size, Liebherr, and their flagship R9800. The R9800 is the largest
excavator Lerber currently builds, and in the world of ultra-class hydraulic excavators, it sits
right at the top table. We're talking about an operating weight of around 810 tons. That's
roughly the weight of two fully loaded jumbo jets sitting on a set of tracks dragging itself
across a mine floor. Power comes from two engines putting out about 4,000 horsepower total. Lerber
offers it with their own D9816 diesels or with Cummins QSK60 engines, and here's where it gets
forward thinking. They'll also sell you a fully electric drive version. In a world moving toward
cleaner mining, a 4,000 horsepower excavator you can run without burning a drop of diesel
is a genuinely big deal. The bucket on the R9800 comes in around 42 cubic meters as a face shovel
or up to 47.5 cubic meters as a backhoe, and it's designed to work as a matched pair with Liebherr's
own colossal mining trucks like the T284, which can haul hundreds of tons at a time. The excavator
and the truck are engineered to dance together. The shovel fills the truck in just a few passes,
the truck rolls off, and the next one pulls in without missing a beat. What makes the R9800
special isn't just raw size, it's efficiency. Liebherr built it with a closed loop swing system
that actually recovers energy every time the machine slows its rotation, reclaiming power
that a normal excavator would just waste as heat. That's the kind of engineering that mattered
decades ago on paper, but only became truly practical at this massive scale recently.
Number 7. Hitachi EX8006. Number 7 comes from Japan, and when it launched, it instantly became
one of the three biggest hydraulic excavators on the entire planet. Meet the Hitachi EX8006.
Hitachi rolled it out in 2012, and it arrived weighing in at around 837 tons. To move that
much steel, it uses two Cummins QSK60 engines, each producing about 1,450 kilowatts. That's
nearly 1,950 horsepower each, for a combined output pushing 3,900 horsepower. The bucket
options are staggering. You can spec the EX8006 with a 40-cubic meter face shovel or a 43-cubic
meter backhoe, and the digging force is genuinely violent, over 2,200 kilonewtons of tearout power,
enough to rip through solid rock like it's wet sand. Now here's where you really feel the scale.
The EX8006 was designed to load Hitachi's own monster dump trucks. It can fill the EH4000AC3
in about three passes, or the truly enormous EH5000AC3, a truck that carries hundreds of tons,
in around five passes. Five scoops from this excavator, and one of the biggest trucks ever
made is completely full. Then it drives off, and the whole thing starts again. Think about the
choreography for a second. You've got a machine the size of a small apartment building, swinging
a 40-ton bite of earth through the air, dropping it precisely into a truck bigger than a house,
hundreds of times a shift in some of the harshest environments on earth, freezing Canadian oil
sands, scorching Australian iron mines, high-altitude copper pits in the Andes. For decades,
this level of continuous brute force at this size was thought to be the exclusive territory
of electric cable shovels, which have to stay plugged into the grid. The EX8006 helped prove
that a hydraulic machine, one that can drive around freely, could compete right at the very top.
That flexibility at that size was ahead of its time. Number six, P&H4100XPC. At number six,
we're switching categories entirely, because not every giant digger is a hydraulic excavator.
Some of the most powerful machines in any mine are electric rope shovels, and the king of that
world is the P&H4100XPC. The P&H name is a legend in mining. It now lives under Komatsu, and the
4100XPC is their flagship electric rope shovel. Instead of hydraulics, this machine uses steel
ropes and electric motors to hoist its dipper. And dipper is a cute word for what is basically
a room-sized bucket. The numbers are outrageous. The 4100XPC has a nominal payload of nearly 109
tons per scoop, with a dipper capacity that runs from roughly 53 up to 68 cubic meters,
depending on how it's set up. It moves around 4,000 tons of material per hour. Per hour,
let that sink in. Now, because it's electric, it never carries fuel. Instead, it stays connected
to the mine's power grid through a thick cable carrying about 7,200 volts, so much electricity
that a crew of workers has an entire job just moving that live cable around as the shovel
repositions. This thing basically has its own power feed like a small factory. The P&H4100XPC
is the perfect match for the absolute biggest haul trucks on earth, the 300-ton and 400-ton
class ultra-class trucks. It fills those in just a few passes, and it's efficient enough that mines
all over the world rely on it as the beating heart of their operation. When two of them showed up at
a copper mine in Chile, they slashed the time trucks spent waiting in line because the shovel
simply loads faster than almost anything else out there. Number five, Caterpillar 6090FS,
formerly the ONK RH400. Now we're getting into legend territory. Number five is the
single largest hydraulic excavator ever built, and it has one of the wildest backstories in
all of heavy machinery. Today, we call it the Caterpillar 6090FS, but this machine was not
born yellow, and it was not born American. It started in 1997 in Dortmund, Germany,
built by a company called Orenstein & Koppel, ONK for short, and it was called the ONK RH400.
When it appeared, it did something no hydraulic excavator had ever done. It smashed straight
through the 800-ton barrier and kept climbing, becoming the world's first true ultra-class
hydraulic excavator. Then the corporate dominoes started falling. ONK's mining division got
absorbed by Terex, so it became the Terex RH400. In 2010, Bucurus bought Terex's mining business,
so it became the Bucurus RH400. And in 2011, Caterpillar bought Bucurus for $8.6 billion,
so this German-designed titan finally became the Caterpillar 6090FS. Same machine, four names,
one crown, and what a machine it is. The 6090FS weighs in at roughly 1,000 tons.
It's powered by two Cummins QSK60 engines pumping out a combined 4,500 horsepower.
That's 3,360 kilowatts of pure digging fury. Its face shovel holds around 52 cubic meters,
letting it move close to 100 tons of rock every single scoop. It was conceived for one job,
to load the biggest haul trucks on the planet, like the Caterpillar 797, which can carry hundreds of
tons. The 6090FS fills a 797 in about four passes, four bytes, and a truck the size of a
two-story house is loaded and gone. Number four, Marion 6360, the Captain.
Number four is a machine that, when it was finished in 1965, could genuinely claim to be
the largest mobile land machine that had ever existed on planet Earth. They called it the
Officially, it was the Marion 6360, an electric stripping shovel built by the Marion Power
Shovel Company. It was commissioned on October 15, 1965, for the Southwestern Illinois Coal
Corporation, digging at a mine near Percy, Illinois, that got nicknamed the Captain Mine,
which is exactly where the machine got its name. The scale of the Captain is almost hard to
believe. Fully ballasted, it weighed around 28 million pounds, roughly 12,700 tons. It stood
about 210 feet tall, the height of a 21-story building. Its dipper held a monstrous 180 cubic
yards, and could move around 270 tons of earth in a single pass. But the numbers aren't even
the coolest part. The Captain had a genius trick. Most shovels dig one coal seam at a time.
The Captain was specifically engineered to strip two coal seams at once. The lower seam was at
track level, and about 50 feet up there was a second seam nearly level with the operator's cab.
So this machine would walk along, tearing into the ground in front of it, while simultaneously
stripping the seam beside it. It even had trailing power cables mounted on both sides, so it never
had to turn around when it reached the end of the pit. It could just reverse direction and keep
working. Under the hood, so to speak, the Captain used 20 main drive electric motors capable of
around 30,000 horsepower. Its eight hoist motors were rated at 1,000 horsepower each, reportedly
the largest ever used in an excavator up to that point. And it moved along on eight massive crawler
tracks at a blistering quarter of a mile per hour. Number three, Bagger 288. Number three is possibly
the most jaw-dropping machine ever built by human hands. If you've ever seen a photo of a mine that
looks fake, like something out of a sci-fi movie, there's a good chance you were looking at the
Bagger 288. Built by the German company Krupp and completed in 1978, the Bagger 288 is a bucket
wheel excavator, and when it was finished it took the title of the heaviest land vehicle in the
entire world. It cost around 100 million dollars, took five years to design, and five years to
assemble. A full decade of work for a single machine. Prepare yourself for these dimensions.
The Bagger 288 is up to 220 meters long. That's about 721 feet, longer than two football fields
laid end-to-end. It stands 96 meters tall, roughly 315 feet, putting it in the same height class as
the Statue of Liberty, and it weighs around 13,500 tons. At the front spins its signature feature,
a bucket wheel over 21 meters across, studded with 18 buckets. As the whole wheel rotates,
each bucket carves into the earth and dumps its load onto a conveyor. Working continuously like
this, the Bagger 288 can move around 240,000 cubic meters of material every single day,
the equivalent of digging a hole the size of a football field, 30 meters deep in 24 hours.
To power all this, it doesn't carry an engine. It plugs into the grid, pulling 16.56 megawatts
through cables carrying tens of thousands of volts. And despite weighing as much as thousands
of cars, it rides on 12 crawlers that spread the weight so evenly it leaves tracks in the soil no
deeper than your own footprint. The most incredible part? This Titan is operated by a crew of just five
people. Number two, Bacchyrus Erie 4250W Big Muskie. At number two, we have an American icon,
the largest single bucket digging machine ever built in the history of the world.
Its name was Big Muskie. Big Muskie was a Bacchyrus Erie 4250 port walking drag line,
and here's the thing, only one was ever made. It went into service in 1969 in southeastern Ohio,
built for the Central Ohio Coal Company, and it cost 25 million dollars back then,
the equivalent of well over 200 million dollars today. A drag line works differently from a
shovel. It throws a huge bucket out on cables, then drags it back to scoop up earth. And Big
Muskie's bucket was the stuff of legend. It held 220 cubic yards and could carry about 325 tons of
material in a single pass. That bucket was big enough to hold 12 automobiles at once. People
used to say you could park cars inside it, and they weren't exaggerating. The whole machine weighed
nearly 12,000 tons, that's 27 million pounds, and stood 222 feet tall, the height of a 22-story
building. Its boom stretched 310 feet, about the length of a football field. And to feed it,
Big Muskie drew 13,800 volts of electricity. It reportedly used more power than a city of
100,000 people. Now here's the number that should break your brain. Over its working life,
Big Muskie removed more than 608 million cubic yards of overburden. That is roughly twice the
amount of earth moved during the entire construction of the Panama Canal. One machine,
twice the Panama Canal. In the process, it uncovered around 20 million tons of coal.
But being that powerful came at a cost. Big Muskie was so massive and so expensive to operate that
when the economics of mining shifted, it was shut down in 1991 and finally scrapped in 1999.
The community couldn't bear to lose all of it though, so they saved the bucket. Today,
that 220-cubic-yard bucket sits in a park in Ohio as a monument, and people walk inside it
to take photos. Number one, Bagger 293. And here it is, the single biggest, heaviest self-moving
machine ever built by human beings, the undisputed champion, the Bagger 293. Built by the German
company Takraf in 1995, the Bagger 293 is the ultimate evolution of the bucket wheel excavator,
and it holds an official Guinness World Record as both the largest and the heaviest land vehicle
ever created. When people argue about the most powerful excavators of all time, this is where
the argument ends. Let's talk numbers, because they're absurd. The Bagger 293 is 225 meters long,
about 738 feet. It stands 96 meters tall, roughly 315 feet, which earns it another Guinness Record
as the tallest terrestrial vehicle on earth. Picture a 30-story skyscraper that drives,
and it weighs a staggering 14,200 tons, that's 31 million pounds of steel, slightly heavier even
than the mighty Bagger 288 it succeeded. Just like its predecessor, it plugs into the grid,
drawing 16.56 megawatts of external electrical power. It rides on 12 enormous crawler tracks,
each about 3.8 meters wide, and because that weight is spread across such a huge footprint,
the ground pressure is unbelievably gentle, so low the machine can roll over soil, gravel,
even grass, without sinking in. A 14,000 ton machine, and it treads lighter than you'd think
possible. At its business end sits the bucket wheel, more than 21 meters across, ringed with
18 buckets. As that wheel turns, the Bagger 293 can tear through roughly 240,000 cubic meters of
earth in a single day, and in a detail that never stops being incredible. This record-shattering
colossus, the largest vehicle humanity has ever built, needs a crew of only five people to run it.
The Bagger 293 sits at the absolute physical limit of what we know how to build and move on land.
It's not just powerful for its time, it's powerful for all time. Nearly three decades after it was
finished, nothing has ever surpassed it. It's the final boss of heavy machinery. Which one blew your
mind the most? Drop your pick in the comments. If this video made you feel small, smash that like
button, subscribe for more insane machines, and I'll see you in the next one.