They Put My Diorama in a Video Game

Mini Universe
4 followers
I was commissioned to make some dioramas by Hero Forge. These dioramas are going to be featured in their upcoming game, Wildmagic Frontier!
#Miniature #MiniUniverse #Diorama #ASMR #TinyThings #TabletopGaming #GaussianSplatting #ScratchBuild #TerrainCrafting #MiniaturePainting #GameDev
AI Generated·May contain errors
Video Summary
AI GeneratedThe video showcases the creation of a physical tavern diorama for \"Wild Magic Frontier,\" a project by Hero Forge that blends digital and physical gaming. The creator details the step-by-step construction process, from foam basing to painting, and explains how Gaussian splatting technology converts the physical model into a digital playable arena.
How's it going everyone, welcome back to Boilie Hobby Time. I've actually been holding onto this
video for a while now and I'm excited to finally be sharing it with you. The team over at A Hero
Forge reached out to me at the beginning of the year asking if I'd be interested in working with
them on a new project. It's called Wild Magic Frontier. It's a game that blurs the line between
digital and physical miniature gaming and it involves real dioramas, so I said count me in.
I'll tell you more about the game throughout the video, but let's dive into what's happening
on screen and talk about that for a sec. The original brief was a 5x5 inch grid with one
additional inch on the back two sides for decorative and storytelling elements. The
first step was to precisely cut out two foam 5x5 inch pieces. Next I sliced a piece of foam
vertically to get one of those Mickey and the Beanstalk bread slices. I'm going to cut this up
into little pieces and use it as pavers for the floor of my tavern. That's what I'm building today
in case you didn't pick up on that from the thumbnail. Once I had my little collection of
paving stones complete, I traced out a grid pattern gently on the top of one of those 5x5s
and then I glued them together to make the base. This diorama is going to become an in-game
location scale to be compatible with Hero Forge miniatures. The scale in the game is the same as
the scale outside the game, so the grid pattern helps keep everything consistent. The next step was
to glue my pavers in place. While this step was a little bit monotonous, it was also therapeutic.
After just a few minutes, the floor was done and you can see that I tried to organically fit it
inside of that grid system. To add a little bit of randomness and interest, I pressed on some of
the pavers harder than others to achieve some variation because they all started at the same
thickness. Foam safe super glue cures a little slower than the unsafe kind, so I went in with
some accelerator to make sure it was all firmed up. I gave the pavers a little more texture with
a resin rock and then it was time to add some grout. For that, I used some foam putty from
Woodland Scenics. This is a really cool product that I don't use as often as I'd like, but for
this use case it was perfect. As you can see, this is the same motor skill as spreading cream cheese on
a bagel or toast. The play surface was now done and it was time to start working on the decorative
elements of the diorama. I started by gluing one more inch of foam on the back two walls
and then I broke out the balsa wood. Off camera, I designed and printed out my own hero from Hero
Forge to use as a scale reference to make sure everything was sized properly. He's just a scale
reference for now, but the digital version of him will show up later in the video. I cut the bar to
an appropriate height and then I cut it to an appropriate length. On the right side of the
diorama, it'll stretch almost the length of the whole wall and on the left side, it will stop
partway, leaving room for some tables and chairs. Next, I assembled my bar top, but before gluing
that in place, I added a toe kick along the base of the outside of the bar as well as some little
trim pieces. Also, you can see here, but I didn't capture it on camera, but after I went through
with the palette knife and the foam putty, it was pretty much perfectly flat, so I went back in with
my finger just to impress and scrape off and just get a little bit more depth in all of the recesses
between the paving stones, which led to a much more realistic look. After the trim pieces, I glued
the bar top in place and from there, it was time to start building up toward the second level
and the roof of the tavern. I used some medieval tavern photos as references for this.
I didn't stick to them too strictly, but thick hand-hewn beams, all slightly out of plum, was
my MO. I was given a brief and some guidelines for how to accurately portray this universe and
honestly, it's incredibly flexible. I mean, just look at Hero Forge's asset library and you get a
good picture of that. The wide array of dioramas that I'll be able to continue to work on
as a part of this project is really exciting to me. Another exciting thing to me, actually,
is fitting everything inside the same size constraints. Trying to fit everything in this
one-inch backdrop is a good challenge and it forces me to be creative. Like with this one,
I wanted to have a back wall with some shelves, potions, bottles, plates, other bar implements,
which will not be to scale depth-wise, but if I do it properly, it should read as credible.
Also, having it in shadow will definitely help. After the back two walls were glued in place,
I began working on the frame that will hold the floor on the second level. Now that I'm
thinking about it, it's probably not the best thing to have wooden slats with gaps that people
walk on above a food prep area, but then again, this town has much bigger fish to fry. Next,
I extended the framing of the back wall up past the second level and then I began working on
the rafters. While designing this diorama, it was fun to be able to include some elements that
went back over top of the play area, really helping sell the idea that this is the interior
of a space. I was considering how to integrate the stairs to the upper level and decided just
have them on the back of the diorama descending into nowhere with the other end or how to get
them being not included, but that will change by the end of the video. You'll see that in a minute.
While food safety concerns are a little more abstract in a fantasy setting, falling off of
things is not, and this tavern owner definitely does not want any lawsuits, so of course I had
to include a railing upstairs as well. And speaking of handrails, I wanted more of the staircase to
be visible, so I glued a little handrail to this section rather than filling it with more wall.
I then added a landing and some stairs, and while this does extend past the size of the base of the
diorama, pretty much everything built above, as long as it's able to be captured, can be expanded
outward, providing a lot more 3D depth to the dioramas, which is really fun. I finally made my
way up to the roof where I glued one sheet of foam as a substrate on which I will stack all of my
shingles, which is the next step. I grabbed a sheet of cardstock. I didn't need to be too careful with
this. I'll cut it into strips that were generally the same size. From there, I collected and stacked
my strips, and after a few more slices, I had my shingles. Then grabbed my foam safe superglue again
and worked from the bottom of the roof to the top. It's another one of those tasks that could be
monotonous or therapeutic if you let it. After the roof, the construction was basically done,
but it was missing some decorations, so I jumped over onto my computer, pulled up HeroForge, and
began kitbashing some decorations from their asset library. This one is supposed to be a trophy wall
featuring various themes and items capturing the eclectic and fun personality of this universe.
You'll see more about that when I paint it in just a minute. And speaking of paint, that's what time
it is. But first, because this project is in development, naturally along the way things may
change. One of those things, for instance, was the play area was expanded from five by five to six by
six. So I reworked the roof. I was also able to add a hallway on the right connecting that staircase
visually, which I was really happy about. I did that off camera to save some time, but now it's
ready to paint. I broke out my airbrush and began priming, and because of all the foam, I opted to
prime everything with a black acrylic rather than a rattle can. I could have gone through the entire
process of protecting the foam with a coat of something first. That would have been an unnecessary
step that would have just prolonged this process. I also love using my airbrush, so why not? While I
paint this thing, I'll tell you a little bit more about Wild Magic Frontier and this really cool
project in more detail. Wild Magic Frontier is a video game that plays like a tabletop game.
It uses hero forge minis that you can design and import into the game yourself or pre-made
characters in the same style. What piqued my interest about this project was that they wanted
to include real physical handmade dioramas as battle arenas and playable terrain. What makes
that possible is the technology of gaussian splats. If I'm being honest, splats is not something I
usually enjoy saying. If it was up to me, I would have called it something different. Anyway, I
The technology is really cool. The basic idea is that you take high definition photos or videos of
an object from all around as many different angles as you need and then you give that information to
the computer and it creates a cloud of little specks of information from those photos and it
creates a perfect recreation of your object in a digital space. I'm not going to pretend I know
how that works from a technical level but I've been intrigued by the technology for a while and
this seemed like a really cool application of it. From there, Hero Forge takes that information,
they put it into Wild Magic Frontier, they work a little bit more computer magic and before you
know it your in-game characters are interacting physically, well digitally physically, with my
diorama in the game. You probably see why I thought that was a cool concept and right up my alley.
The Kickstarter for Wild Magic Frontier will be live starting September 10th. Follow the link in the
description or up on the screen to sign up. I've made two dioramas for the game so far and depending
on how well funded it gets, hopefully I'll be able to make many more. Very honored to be a part of
this project and thankful to Hero Forge for the opportunity. After the tavern, I painted all of
the decoration including these little crows which will be mocking people from up in the rafters.
For this wall of trophies, I decided to go pretty eclectic. Front and center is a dragon because
I feel like that was a good place for it but we also have a little baseball,
a banana that never rots for some reason, a unicorn horn, one of those fish that talks when
you push the button. Things that the tavern owner has collected through his time in the frontier.
For my playable character, I made the tavern keeper who just wants to prepare the finest food
and beverages inspired by his travels for his guests but he keeps getting interrupted by
ne'er-do-wells and bandits seeking to disturb the peace of his tavern. He keeps a battle axe on his
person at all times just in case and a cloth, a tea towel over his left arm for spills and
potentially bloodshed. With that, the painting was done and it was time to get this thing decorated.
Once the tavern had been filled with decorations and looked like it was lived in, the last step
was to take some photos. Over 300 of them against this checkered backdrop. I took a couple other
photos to help line up the light and get the colors correct. I sent that all off to HeroForge
and after that, I called it good. That is it for this video. Thank you again to HeroForge for
including me in this project. I'm really excited to see where it goes. Go check out their Kickstarter
page. The link is in the description. Hope you all enjoyed the video. Huge shout out as always to my
the best. Have an awesome week everyone. I'll see you next time.
