Had some time this weekend and a desire to make something new and interesting. So, went ahead and created a rainbow succulent planter using a little bit of my creativity and some general purpose cement. This is the first time I am creating something using cement; So, it may not be a super awesome one, however I think the end product doesn't look that bad aii...
Had some spare time this weekend and a desire to make something new
and interesting. So went ahead and created a rainbow succulent planter using a little bit
of my creativity and some general purpose cement. This is the very first time I'm creating something
using cement so it may not be the super awesome one. However, I think the end product doesn't
look that bad eh? This video is sponsored by Javi Coffee. Javi is the fastest, easiest and
the most convenient coffee that you can prepare in few seconds to enhance your mood, energy and
the quality of life. Simply add 1-2 tablespoon of Javi Coffee concentrate and enjoy your favourite
drink. Javi Coffee can be served hot or cold depending upon your mood and the time of the day.
You can order Javi Coffee concentrate online from www.javicoffee.com. You can choose between
6 different coffee flavours. Life is all about what you make of it and coffee truly makes it
much better. Javi Coffee fuels your imagination, aspirations and desire to live the best of your
life. To create the mould, I'm using brickies sand. I created a 9cm high cake like structure
for the mould. Be sure to pack the sand well so that it retains the desired shape when you start
carving the shape. You can use spoon or your finger to pack the sand well. Now using a bucket,
I created the circular shape on the sand. Then using a popsicle stick, I created the desired
shape along the circular line. Now using a spoon, I removed all the unwanted sand from the mould.
Make sure the sand has enough moisture in it as the risk of the sand collapsing is significant.
So, be very careful. To create the cup shape for the succulent, I super glued a spray cans cap on
a piece of pallet wood. Then I pushed the pallet wood into the sand and using a spoon, I removed
all the unwanted sand from it. To prepare the mixture, I'm going to use the commonly used 3x1
mixing ratio. Mixing a small amount of sand and cement in a bucket like this by hand is not only
fast but very cheap for any small DIY job around the house. Before mixing the cement, please make
sure you wear a mask and try to mix it outdoors. When mixing outside, please check the wind
direction and make sure the wind is blowing away from you and not towards you. Occasionally rotate
the bucket while mixing until you get an even mixture. Then add some water to the mixture.
Don't go mad and add a lot of water as I nearly did here. Next, I slowly poured the diluted cement
inside the sand mould. This step requires a lot of concentration. You will have to work very slowly
as the risk of sand collapsing is very high. Once the cement dried up, I removed all the sand and
extracted the piece of art from it. Alright, so this is how it looks like. Succulents are actually
very durable and are able to survive in variety of temperature, soil and weather conditions due to
their resilient nature. So they were the perfect choice for my planters. I mixed a bit of sand with
some homemade potting mix and after adding a bit of water to the mixture, I planted the succulents
in the rainbow planters. So this is how my final setup looks like. Since this was my very first
DIY project using cement, I feel very proud of how it finally looks like. Do comment and let
me know if there are any scopes of improvement. Thanks again for watching this video. I hope it
helps you. If you want to support me, you can subscribe to my channel and watch my other videos.
Thanks. See you again in my next video. Bye now.