Do you love your glass or PEI surface, but hate dealing with bulky clips? or waiting for the bed to cool? do you yearn for the easy removal of a magnetic bed, but still wish to maintain that glass-like smooth surface? do you have problems with some filaments adhering, and others not? are you sick of blue painter's tape? if you answered yes to any of these questions, you need to watch this video. This is my hack for making MAGNETIC PEI surfaces, that are hot swappable, and print smooth as glass. everything sticks to this buildtak PEI! and the PEI adheres to the bed with no clunky clips, maximizing your printing real estate! dont forget to subscribe for more 3d-printing tips, tricks and hacks in the future!
Technivorous is about all things tech. It's for geeks who love to code, And for makers who love to build. It's for people who are curious about Raspberry Pi's. And 3D printers. And game making. Pretty much anything Tech!
If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. other ways to contribute: if you shop on amazon, bookmark this link and use it, it costs you nothing, and helps me out a ton! https://www.amazon.com/?rw_useCurrentProtocol=1&tag=technivoro00-20
if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Disclaimer: ANY AND ALL reviews are my own, honest opinion, and I do not accept payment in exchange for a favorable review. for more information on where to send your tech to be reviewed, e-mail me at [email protected] Subject:TECH
Current Channel Goal: 1000 Subs!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
This is my most used and abused ender mat. It is the first one in the original that came with my
ender and it is pretty well destroyed. I did order another one a while ago. They're pretty cheap.
I got this one and the backing magnet because it's meant to do a completely new surface.
So keeping that in mind, Buildtak was nice enough to send me these. So they sent me two
Buildtak plates and two PEI sheets. So since I need to replace the mat on the ender bed,
I'm thinking I'm going to cover this up, get a razor blade, snip this, wash it real well,
and we will cover that with the Buildtak surface. And I have this magnet from the back of the
second mat that actually adheres to the bed really well if you find the proper orientation.
So we're going to take a Buildtak and make it magnetic. So we're going to try that as well.
Now I do have these two backup sheets. These are going to be the ones that I place onto the printer
and actually test them the way that they're supposed to be applied to ensure that that's
done properly. And then we can even compare the properties of the two. All right, if you've watched
my channel before, we have been over orientation before. Okay, and which way to orient the mat.
Now if I place it with the lettering sideways, I don't get any, I mean, it's magnetic,
but the adhesion is poor. If I place it with the words vertically, I get a lot more magnetism
there, a lot more cling. So this is the way I want to orient it. And I want to put this sheet on
right here. So we're going to remove the 3M tape on this magnet and the backing tape on the back
of the PEI sheet. Let me get this a little more square here. Let's try it with the words in the
other direction. That adheres just as well and I get it a little bit better located where I want it.
That I believe will do. So let's go ahead and remove the 3M backing tape. Be careful not to
touch our glue there. Now I'm going to peel the backing off of the PEI sheet here. Now what's
interesting about this is I'm going to want to wash this very thoroughly before I use it,
because even just from barely touching it, the fingerprints are ridiculous. Now I am going to
take this and we're going to take it somewhere where I can press it flat and iron down on it a
little bit and wash up the surface and come back and run a print. So a while back I did that test
where I took the magnetic mat and attached the Buildtak surface to it. I have actually only used
this once. It did work really really well, but the reason I've only used it once is because when they
sent me the Buildtak and the PEI, I was really excited about the PEI, so I put that onto a
magnetic backer and made my own magnetic mat something like this. Now it's out on my printer
right now and there's a print on it so I can't take it off, but I will show you in a clip here
in just a minute. But these mats were starting to get marred up and you can see some of the
upper layer flaking away and stuff like that. So what I did is I cleaned it really well with
solvent and kind of sanded it down a little bit actually, and then I basically just glued this
right to the top of it. This underneath is an Ender 3 mat. You can see the tab sticking out here.
The other one, this is a secondary mat that I bought. With this mat came the backing magnet
that you attach to the actual plate itself, so there were two magnets. I took that backing
magnet, as you saw in the video clip earlier, and attached it to the back of the Buildtak PEI.
Now it works extremely well. I've used pretty much nothing but that Buildtak magnetic sheet
since I put it on. The adhesion is amazing. I have not had a single filament not stick,
and that's including the Talman stuff that I put in there. I didn't need to tape it,
anything like that, so I was impressed with that. The Buildtak, this also worked really well.
Unfortunately, there is a slight height difference between the two,
and this has the much thicker magnet on it. So when I swap back and forth between the two,
I have to re-level my bed, which leads to me not using this very often, unless I'm trying to print
a bunch of stuff in a hurry, or I print something big on the PEI and I can't remove it from the
build plate. So this is very nice stuff. I will do some more videos on just the Buildtak once I get
to actually using it, but I just wanted to say that this PEI is, and I'm trying not to fingerprint
it up because it does this stuff, I will show you some of the surfaces that I've gotten.
Let me turn my light on here, and yeah, I'll show you some of the surfaces I've gotten from
the PEI. So as you can see, smooth as glass, that's the plate surface. This is another,
and you can see it's very, very nice. And again, you get this nice smooth glass. Now,
a couple of these are failed prints. These here are some keychains I'm working on for
something, and I'm still working on the design. This was the original, and then I changed to the
cassette tape, but my writing is a little too small, so I'm still working on that.
So don't judge the model overall, but the surface where it adheres to the build plate is gorgeous.