yesterday we discussed the specs of the ender 3 and the video was getting a little long but I wanted to show you the same model at different layer heights to illustrate the difference in speed and quality
The following is a list of affiliate links for ender 3 parts, and upgrades. using them helps the channel out a ton, so if you use these videos, and need to order parts, please use these links!
If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel.
other ways to contribute:
if you shop on amazon, bookmark this link and use it, it costs you nothing, and helps me out a ton!
Now, before we get to the video, if you're new to the channel, I wanted to let you know
that we try to stay up to date on all things 3D printing, from filament and printer reviews
to in-depth slicer analysis, as well as a plethora of how-to videos.
So if you haven't already, make sure you hit that subscribe button and ring the bell so
you can be notified every time we post a new video.
Hey guys, Tech Nervous here.
Yesterday in my Pole Ender 3 review, we discussed its capabilities as far as layer heights
in terms of minimum and maximum, so today I printed a few test cubes.
I wanted to show you guys the difference.
So here we have our three cubes, ordered by layer height, from smallest to largest.
On the left is the 0.1mm, in the center is the 0.2mm, and the right is the 0.4mm.
So let's take a minute to examine each one a little closer.
This first one is the 0.1mm layer height.
It came out super smooth and is the best looking by far.
The layer lines are nearly invisible, and the definition is great.
This is absolutely an acceptable model, except the 0.1mm layers this tiny cube took about
an hour to 10 minutes to print.
So, moving on.
This one is the 0.4mm layer height.
Notice how the layer lines are extremely visible.
This is fine for a mock-up or a rough draft, but in most cases the definition is not high
enough to produce prints of production quality.
It was super fast though, coming in complete at just over 18 minutes.
Moving on again.
And here we've come back to our middle model, this is the 0.2mm layer height.
This print took about 38 minutes, which is a happy medium.
Notice how the layer lines are only slightly visible, and the lines can be sanded away
in post-production, leaving a viable end product.
The time was almost half of the 0.1mm model's print time.
It's also possible to print at heights between 0.1mm and 0.4mm, such as 0.16mm or 0.24mm,
allowing for a greater range of options to find the best blend of quality and speed for your purposes.
Well, that's it.
Just a quick look at what to expect from print quality from your Ender-3 at different layer heights.
We'll be testing print speed soon with a similar test to show you the difference between what
the Ender-3 claims it can do, and what it can actually do in a quality manner.
As always, this channel was brought to you by these fine Patreon supporters.
If you'd like to support the channel on Patreon, head over to www.patreon.com.
Alright guys, that's going to be the end of this video.
As always, thank you.
I'll put a video up right here that you can check out for more of our stuff.
And if you're still here and you haven't already, why don't you click right here and subscribe to the channel?