Cura settings in 5 minutes or less! - 2.1 - Wall Thickness

Technivorous 3d Printing
33 followers
1 Video View·Sep 2, 2026
Learn cura's wall thickness settings in 5 minutes or less! This video goes over the wall thickness setting in the shell section of cure's custom options.
AI Generated·May contain errors
Hi folks, TechNiverse here. Welcome to my Kira playlist.
Before we get started, hit that subscribe button so you can find your way back here.
I update often. That said, as you may have noticed, Kira settings can be very simple
or very in-depth. So I took the time to make a video about each section in the custom settings
menu and I'm going to quickly go over the important settings each section contains
and briefly explain them. Are you ready? Good, let's go. This is Kira settings in five minutes
Let's talk about wall thickness. Now this one is a little bit easier to illustrate in my viewport
here and you can see that the setting here wall thickness is set to 1.2 millimeters. That is the
thickness between the inner and outer perimeter. That is basically how hard my model is going to
be, how thick the shell itself is going to be. Below that, the number is set based on your
nozzle width and the wall thickness, how many passes it's going to take in order to achieve
that two line or excuse me in order to achieve that 1.2 millimeter thick wall. In this case,
it's going to put two walls. We are actually going to go up adjust a little bit of our settings here
and change our line width back to 0.4 from the last video and then we are going to reslice
you can see it is changed now that my my width has gone down it has changed the wall line count
based on the width not based on the height okay so it is saying wall thickness 1.2 millimeters
but now it is giving me three lines and you'll see three perimeters when it's done slicing here
around the inside instead of those two lines they are thinner at 0.4 millimeters instead of 0.6
millimeters but there are indeed three of them now the outer one is the actual shell layer and
the green ones are the walls so it is counting the shell as a wall but it'll basically expand
outward into here so as not to deform the geometry of the model because if it were to put those on
the outside it would end up wider or thinner than our specification so wall thickness is pretty
important there are some handy tricks you can do involving wall thickness now it's not going to
work on a block like this because it has a flat top but if i were to do any sort of model with a
rounded or pointed top or that had a more shallow incline towards the top surface it is very simple
to increase your wall thickness to three millimeters that gives me seven passes and in
that case i can just turn off my infill and generally it will just build itself up on the
wall gradually and the print will come out okay now this doesn't work if you have giant flat top
surfaces but for bevels or rounded edges it works really well so now you can see it's doing it with
these seven layers i haven't turned off my infill because i'm i'm not actually going to print this
like i said it wouldn't work with the squirt with the cube but that is a good thing to have because
you can actually save a lot of filament by printing more walls and less infill so
as always this channel is brought to you by these fine patreon supporters
if you'd like to support the channel on patreon head over to www.patreon.com slash technivorous
that's going to be it for this video as always i am technivorous and thanks for watching don't
forget to check out our main channel page where we do a free giveaway for our subscribers every month
so far we've given away things like a capricorn ptfe tubing kit
and spools of filament so the giveaway videos are always pinned to our main channel page
so all you have to do is subscribe and leave a comment on the giveaway video for the current
contest feel free to check out this video right here youtube picked it for my content just for
you and if you haven't already you can hit the subscribe button right here so what are you
waiting for become a technivore now thanks again technivorous out
