Cura settings in 5 minutes or less! -5.3- Initial Layer Speed

Technivorous 3d Printing
33 followers
1 Video View·Sep 2, 2026
Learn about curas initial layer speed setting in 5 minutes or less!
AI Generated·May contain errors
Hi folks, TechNiverse here. Welcome to my Kira playlist. Before we get started,
hit that subscribe button so you can find your way back here. I update often.
That said, as you may have noticed, Kira settings can be very simple
or very in-depth. So I took the time to make a video about each section in the custom settings
menu and I'm going to quickly go over the important settings each section contains
and briefly explain them. Are you ready? Good, let's go. This is Kira settings in five minutes
Now we're going to talk about that initial layer speed setting that I was talking about. Now,
if you're having trouble adhering to your bed or you're catching on your bottom layer and
ripping it up at the printhead, A, you may be too closely leveled to the bed if you're grabbing it,
but B, there is a possibility that your filament is just having a hard time sticking
and decreasing the speed of those first couple layers can increase with your adhesion.
And in order to do that, what you're going to want to do is you're going to come here
to initial layer speed and you're going to set it to the desired speed. Now with my settings
being set to what they are, it is set my initial speed to 20 millimeters per second. If I need to,
I can turn that down even more to 15 millimeters per second and it will change the initial layer
print speed. You can also see that my initial layer travel speed is lower just to ensure that
it doesn't catch and grab objects and rip them up. You can turn that down as well and the skirt and
brim speed is pretty much linked to the initial layer speed because it is printed in the initial
layer speed. The other option that is connected to these is the number of slower layers and if
you wish, you can increase or decrease that. You can do one layer at this slower speed or you can
do five layers at this slower speed. It is completely up to you. So I generally tend to
turn that down to one because once I get my skirt and brim down in that first layer, it tends to be
smooth sailing after that. That is basically going to be the gist of the speed controls.
There are a couple other options that we will go over but you can see here if I slice this
and we can actually go in and change the speed rate. Now this has a lot to do with the speed.
As you can see, the bottom two layers, the bottom one layer is going to be put down a lot slower,
closer to the 12.5 millimeters per second. As I get up to that second layer, it is immediately
going to be a little bit over into this nice cyan color instead of that hard blue. To illustrate
that a little bit better, let's go ahead and change it to five slower layers. We will slice
this and you will be able to see the feed rate adjusting to about right here. The first layer
should be that hard blue color before adjusting. There we go. You can see that these first five
layers are going to print at a slower speed. If we wanted to, we could go all the way up.
Let's illustrate this just a little bit more dramatically here.
Let it slice so you can see the color difference.
There you go. It is speeding up right about here. I definitely don't need 20 layers at a
super slow speed. We're going to reduce that back to one just to ensure that my skirt goes
down properly. That's going to be the only messing with this setting that I do for most cases.
As always, this channel is brought to you by these fine Patreon supporters.
If you'd like to support the channel on Patreon, head over to www.patreon.com slash technivorous.
That's going to be it for this video. As always, I am Technivorous and thanks for watching. Don't
forget to check out our main channel page where we do a free giveaway for our subscribers every
month. So far, we've given away things like a Capricorn PTFE tubing kit and spools of filament.
The giveaway videos are always pinned to our main channel page. All you have to do is subscribe and
leave a comment on the giveaway video for the current contest. Feel free to check out this
video right here. YouTube picked it for my content just for you. If you haven't already,
you can hit the subscribe button right here. So what are you waiting for?
Become a Technivore now. Thanks again. Technivorous out.
