Automotive Research and Development Centre (ARDC) - Mohammed Malik, Vehicle Dynamic Simulator Lab Manager

Automoto TV
2 followers
Sep 4, 2026
AI Generated·May contain errors
Our lab is a little bit different from all the other labs. We don't test vehicles. We don't
test components. But we test virtual computer models. What does that mean? That means we're
able to take computer models and drive them. So a driver can get in. They can evaluate the vehicle
model to see how it's behaving. So we can drive on different roads. We can take the vehicle on
railway tracks. We can drive the vehicle over potholes. We can even take the vehicle and
drive it on a track, for example. And the feedback that we get is more about how the vehicle feels
on these different road conditions. Our simulator has nine directions of motion, which actually
enhances the experience by the driver. So we're able to capture every motion of the vehicle by
having these additional directions. The changes that we want to make in the computer model are
very easy. The driver tells us what changes we want to make. And on the fly, we can make these
changes. Changes like, for example, we want to look at 10 different tires from 10 different
suppliers. And we want to change also the pressure in the tires. We can do that on the fly.
Whereas if you had to do this physically, you would have to have 10 tires. We would have to
then change the tires while we're driving. We'd then come back to the pit stop, then make those
changes. The problem with that is it's time consuming, and it is also costly. So we're trying
to avoid that time and cost associated with developing the vehicle. By using our simulator,
we can really reduce the time to product development. We can start working with suppliers
early on, make those changes, not leaving all these changes to the last minute where it could
be costly. It could be time consuming going back and forth with the supplier. So if we start early
on, as soon as we have a computer model, we can make those changes, work with the suppliers, and
get the right components set up.
