in this video we take a look at kodaks free slicer software! you may see a few things you recognize if you are a cura user! this software is rediculously stable, come check it out!
micro-swiss hot end: https://amzn.to/2pSQHsr light bar led upgrade: https://amzn.to/30UyPKm If you cant afford a donation, thats ok. leave a couple likes. and dont forget to subscribe. sharing and liking our videos is one of the best ways to help support the channel. if you can afford a donation, please contribute! a little goes a long way! thanks again for all the support people! I couldnt do it without you!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
Hey folks, TechNiverse here. Today we're going to be taking a look at another of the free slicers
and you're going to be very very familiar with this already. This is the free slicer
that is available from Kodak on their website and for their 3D printers. So you can use this for any
other FFF machine. I'll show you how to set it up but you should probably already be familiar with
it and I'll show you why. Now I know what you're thinking, Kodak has a slicer? Well yeah they do.
I mean this is their logo right here you can see up in the corner as well as on my start menu down
here. But if you take a closer look you'll see that no, no they really don't have a slicer.
This is all eerily familiar. So let's take a look at the icons in particular. Do you recognize some
of those? How about if we open up some of the settings and take a little bit closer look.
Not just that but this bar being here on the right side is very indicative of some other software
you've probably seen before. Let's go ahead and check out some of these other options. Okay they
do have a couple settings up here that aren't in the normal software but there it is right there.
If you go to the preferences and click right here you'll see it says configure Cura. Now I know you
can't see the top of this menu here like I said that is just the uh the preferences button that
you're missing there. Let's go ahead and check out about because this is Kodak version 3.6.6
otherwise known as Cura version 3.6.6. So a little bit of an older version but it is pretty stable.
It works really well with Kodak stuff and as you can see all of the features that are heavily used
since 3.4, 3.5 are in here. Such as tree support and things like that. So this is basically just
another skin just like that cruelty slicer that we talked about. Let's go ahead and import a model
here and take a look. And here we have a simple chess piece. This is a knight and as you can see
once again it looks very very familiar. Same basic Cura overlay it has the Cura overhang notice there
that you're going to need support in those red areas and a lot of those other options. So what
I was curious about is up here in the extensions there is a Kodak update checker which will check
for updates. Now I just downloaded this so I know it's the latest version of their software
and if you click it it does not give you an option to upgrade to Cura 4.5 or 4.6.
So they do have apparently their own branch here. Let's see what else is in here.
Some post-processing stuff. I'm gonna pop into their marketplace real quick and see what they
have for extensions. And here it is their marketplace. So you can see that they have
a couple of featured products. The inventor integration, mesh tools, and Siemens integration.
Taking a look down here they do not have a thingy browser plugin like Cura does but there are
several of the other plugins. I think these are the plugins from the older version before Cura
updated to 4.4. So quite a bit of things in here. I think a couple of these are no it looks like
they're all extensions that were available before. And I have added an extension. Once you add an
extension you're gonna have to reload Cura. So I did close it and open it back up. And this is the
mesh tool. So here you can do a couple of things. Oops obviously I need to select the model.
And it's saying down here it is watertight. That's good. Let's see what else we can do.
Fixing the normals doesn't seem to have done much. It was a pretty simple model so not much.
And it says it could not be split into sub meshes which is interesting. So
yeah this is basically just a quick look at the Kodak slicer. There is a handy pop-up when you
turn it on for the first time it pops up it does say that it's derived from Cura
and give you some documentation about that. And there is also some online documentation as well.
So that is going to be here and you can see Kodak slicer. Let's see getting started.
This gives you pretty much the basics of how to run through all of this and what to do and how
to slice everything. So it's basically this is exactly like Cura. I don't think at this point
they have any options that aren't available in Cura just yet but they do have some branch
developments going on down here that you can find and check out if you're interested in seeing what
they have going on. So there's also some pages on here about dual printing right here. Dual
materials, dual material models and there are some downloadable printing profiles just for the Kodak
slicer. So all in all pretty cool very well polished. They are a little behind Cura on updates
but I think that is because it's Kodak you expect their products to be extremely polished so I'm not
sure how often they update. We'll check back if I see another update because I'm curious to see if
this branch is going to draw from Cura's latest updates or if it is completely off on its own
like a Prusa slicer sort of arrangement. So there you have another quick delve into a free slicer.
This one again obviously being a re-skinned version or branch off of Cura. Now this one is a
lot more polished and newer than the skinned version we saw from the latest version of the
Creality slicer so definitely worth giving it a look if you want something that is very much
like Cura but stable and updated less frequently in order to maintain that stability. If you enjoyed
this video don't forget to leave a like down below, smash that subscribe button and don't forget to
ring the bell for notifications so you can get notified every time we put up a new video. I do
review a lot of slicers as well as filaments, 3d printers and other techy things so stick around
if you want to see more and I'll see you next time. As always this channel is brought to you
by these fine Patreon supporters. If you'd like to support the channel on Patreon head over to
www.patreon.com slash technivorous. That's going to be it for this video as always I am Technivorous
and thanks for watching. Don't forget to check out our main channel page where we do a free
giveaway for our subscribers every month. So far we've given away things like a Capricorn PTFE
tubing kit and spools of filament so the giveaway videos are always pinned to our main channel page
so all you have to do is subscribe and leave a comment on the giveaway video for the current
contest. Feel free to check out this video right here. YouTube picked it for my content just for
you and if you haven't already you can hit the subscribe button right here. So what are you
waiting for? Become a Technivore now. Thanks again. Technivorous out.