Today in fusion 360 were going to look at form mode, and a few other tips and tricks. come and learn modelling for fusion 360 so you can print your own cad models!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
now accepting reviews! sorry we DO NOT take payment for better reviews.
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial introduces the \"Create Form\" workspace in Fusion 360, demonstrating how to create organic, non-linear shapes using T-splines. The instructor guides viewers through creating a basic box, manipulating its faces and points to create a custom figure, and transitioning the organic form into a solid model for further editing.
It's time for another Fusion 360 and 3D printing tutorial.
We are back at it again today.
I told you we would take a look at this create form.
So let's do that.
All we need to do, we don't need to pick a plane
or start a sketch.
We're gonna click directly on that
and it is gonna bring us to another window.
You can see all of our other toolbars have disappeared
and we now have these options right here.
Now these are planar and facial options for changing things.
So basically, what we're going to do is add a box.
And at that point, we'll have to select a plane
and it doesn't matter.
I think we'll do the bottom plane.
And then it's gonna say rectangle type.
So we're gonna draw a rectangle
just like we're making a sketch.
It is a center rectangle.
So you put the center of where you want the box to be
and then you can go ahead and set your dimensions.
So let's make this 100 by 100.
Get a nice square.
And here we have our initial item.
So, well, what can we do with this?
Let's take a look at some of the options we have
for manipulating this mesh.
The first one I wanna show you is modify.
So if I hit modify under edit form,
it's going to allow me to select a T-spline entity.
And what it means by that is either a face
or a line or a point.
In this case, I'm gonna select two faces here
by using the shift key.
And I'm just gonna drag them upward.
And as I rotate around here, you can see what's happening.
It's pulling the center of those two faces upward
and slightly pulling the points of those two faces upward
depending on their tangency to the next line.
So what that means is this curve,
since this surface is pretty flat,
this curve is a lot more shallow.
Since there's an angle here,
this curve is a little bit more steep.
There are a lot of other options
for things that we can do like this.
We're gonna go ahead and hit okay
because I don't mind that transform.
I think it's all right.
I do wanna hit modify and I wanna grab this face
and move it in.
Let's do 20, so it's a little bit more obvious.
I can hit okay, then grab this face
and we can do the same thing,
except I'm gonna do negative 20.
And there are ways to do this symmetrically.
I'm just showing you kind of the basics here.
So you can see we have this funky shape
and what we're gonna do from this point
is we're gonna go ahead and go back into modify here.
And we're looking at all of the options
for modifying the stuff that we have.
What we're gonna do is subdivide
because I wanna add extra lines,
although I already had that face selected.
So that was a mistake.
I wanna unselect that face
and all I have to do is hit the X there.
And what I wanna select are these faces.
And then unfortunately, it's making me do one at a time.
So what I wanna see if I can do this, there we go.
So if you pre-select them and then hit subdivide,
it will let you subdivide more than one at a time.
The best practices though,
in order to keep everything the same size,
so everything flows a little bit better
is to select everything and then subdivide.
That will give you more triangles,
more polygons, all that stuff.
But it does give you a lot more points to work with
than to a certain point that is perfectly fine.
So I wanna take this time,
I wanna grab this point right here.
And in fact, I wanna grab this line
and I'm gonna grab it, the first two here
and we're gonna move those to right there.
Let's do 30 and then we'll do the same thing
with the other side with a negative value.
We're just kind of keeping things symmetrical,
not really making anything in particular here,
but you should see basically what's going on
and get the gist of it.
So now I have this strange figure here
and I'm gonna grab this point and this point
and bring them up like that.
And at this point we can also, this is the scale, okay?
This arch right here.
It gives us some nice funky ear looking things, that's okay.
And then let's grab this and move it to,
oh, nope, I hit the wrong thing.
Thank God for Control Z.
We're gonna hit okay here
and then I will hit modify again.
At least I don't wanna mess up what I've been doing.
That works pretty well,
but I'm not getting really what I want
because my resolution isn't fine enough.
So we're gonna hit cancel
and we're gonna select the whole model again and subdivide.
Now you could just go and subdivide it a bunch of times,
but I wouldn't recommend doing that.
You kind of want as few polygons as possible
and the way to do that is to kind of keep them minimalized.
So only subdivide if you need to
to save yourself time printing later.
And not only that,
but also coming up with memory and stuff like that.
So I'm gonna hit cancel one more time.
Still not getting the effect I want.
So what I can do is go to finish form.
Okay, so it's telling me edges or faces may be crossing.
And that is, these lines right here,
I made them go in too far.
So there is an easy fix for that.
We'll close this and we will select,
actually let's do it with the whole squares
just so we know we get the whole thing
and not the wrong lines.
Modify, we'll just scale it down so it pulls them in.
So you can see those lines that were crossing
over each other are now back to where they need to be.
Hit okay there.
And now I should be able to exit form.
There we go.
And I have my model right here.
Okay, these are my basic faces.
So now what I can do is go in
and I can sketch on one of them.
Since they're not flat, it's gonna let me select it
and then it's gonna put it kind of behind there.
So when I try to draw this sketch, I'm gonna have problems.
So I'm actually gonna hit finish sketch.
And for this, I'm going to use an offset plane.
I wanna make sure that it's out past
the side of the face here so it's grabbable.
It doesn't need to be all the way out past it.
I'm only gonna be grabbing this part right here.
So as long as it's past there, it should be good.
And we're gonna rotate.
We're gonna sketch right on that plane.
And guys, this is real quick.
I know this isn't the best model.
I'm just kinda, the form started to take a shape to me.
So I'm kind of playing around with that shape
to see if we can get something that's kind of at least
aesthetically pleasing as we work here.
Let's do that, let's just put a hole right through it.
So now our cat-like thing has eyes.
Very, very simple figure, as I said.
But very organic as well with the flowing shapes.
Now if I were to take a lot more time
and put a lot more detail into this,
I would be able to do a lot more.
But once I change that form to a solid,
I'm not able to manipulate it anymore.
I can do some other things.
Basically, let's try real quickly adding in our own face.
So if we go to here, it's gonna give us the front plane.
And here we have our face.
There are a couple of ways that you can do this.
Edge mode is set to edge, there we go.
So basically you can select an edge,
draw it out, draw two points,
select an edge, draw it out, draw two points.
You can do this to make the polygons
for the form that you want to deform.
So this is kind of like sketching for the form mode.
And there are other manipulations you can make as well,
and you don't have to start with the cube.
There's a cylinder and a ball as well.
There is a torus in here, there's a plane plane.
And then there are also extrude and revolve options,
just like we used in the sketch mode,
and they are pretty much exactly the same.
So let's go ahead and hit cancel.
We don't actually need this.
I'm gonna hit finish form, it's gonna give it to me anyway.
We're just gonna delete the polygons it gives us.
And this little guy is gonna go bye bye as well.
I really have no desire to print it.
But it was a pretty cute little model
and a good quick first look at the forms mode.
I think we'll play around with this some more
in some future videos.
I just wanted to make you aware it was there
so you weren't banging your head against the keyboard later
wondering why I showed you all of these other options
before I showed you the probably simplest way
to make a quick, less detailed model.
You can make things that are very detailed using this mode,
but it will take a little bit more time
than just sketching and extruding.
And it's a little bit harder to tell your exact dimensions
than it is when you are doing the normal solid mode.
That's gonna be it for this video, guys.
We will have a couple more of these videos
coming up in the next few days.
Although I do have a couple other videos
that aren't CAD tutorials in the works.
So if you're interested, stick around for those as well.
But if you'd like to see the CAD videos,
make sure you hit that notification bell down below
so you can be notified every time I post one.
This playlist is up to five videos as of today.
We plan to keep adding to it.
If there's any particular features that you would like to see
or that you're curious about,
go ahead and leave me a comment down below.
Don't hesitate to ask.
And as always, you can jump over to the Discord channel.
I will put a link to that down below as well,
allowing you to enter and ask questions.
There are a lot of helpful people on there,
and we're developing quite a nice little community.
Although I will say some of the boys are kind of raucous,
but we tend to get along,
and it's kind of entertaining, really.
I've seen some pretty interesting stuff on there.
There's some really nice prints going on on there.
There's some CAD advice and things like that.
So if this is helpful to you,
there's a specific thread about CAD tutorials
on the Discord, and not just my CAD tutorials,
but other resources as well for learning CAD
to do 3D printing.
So definitely worth giving it a check, guys.
And I'm gonna say Technivorous out.
We'll see you in the next one, guys.
And that's gonna be it, guys.
Thanks for stopping by.
If you'd like to become a Technivore,
don't forget to hit that subscribe button down below.
And YouTube's suggesting a video for you right here.
And there's a playlist right here
that's just 3D printing stuff.
Also, if you'd like to see your name up top
with the rest of my Patreon supporters,
head over to www.patreon.com.