This is the first full release version of prusaslicer in a while and the slicer has undergone a lot of iterations and changes since 2.2 lets take a look at the nes features in 2.3, and see what all the hype is about. a few of the new additions include paintable seams, and paintable support and support blockers, so lets start there!
Like and Subscribe!
Want to Support the channel? check out our website for all your 3d printer related purchases! https://www.technivore.club -AND- Subscribe now to get my newsletter, and updates on the LATEST and GREATEST in 3d printing! https://technivore.club/newsletter
Want to send me something? Technivorous 902 n Hughes
Blunt Sd 57522
Welcome folks to the Tech Nervous channel
This is an in-depth look at the latest full release version of Prusa Slicer. This is version 2.3
Now there have been several different alpha versions and a couple of betas for this and throughout those versions
They have instituted several changes
So we're gonna jump over real quick and we'll take a look and it'll tell you all the different releases
They've gone through here all the way from alpha 1 through 2.3 point 0 dash
HRC3 so there are several versions and each of those versions has its own change log and bug fix list
And it even says right in here to go ahead and check out each of those
Individually if you want to know what all the features are so that can be a little complicated real quickly
I'm gonna give you a rundown of what we have here in the new Prusa Slicer that you are gonna want to be aware of
So stay tuned. It's happening right now on the Tech Nervous channel
Tech Nervous channel is brought to you by these fine patreon supporters. Check us out on patreon at patreon.com
slash Tech Nervous
All right. So here it is Prusa Slicer 2.3 point 0 so I have a torture egg here that I'm working on
Please please don't ask me for the file. It is not done yet. I will make sure to post it when it's complete
We are printing one right now
But we are gonna do some more changes to this blank space here and get some more negative space going in there
I just wanted to make sure that the angles I have now don't need to be adjusted and that they are actually printable
There are some kind of steep ones in there
But the reason I chose this model is because it's going to allow me to illustrate a lot of the new features in this version
so I'm gonna start down here with seam painting now seam painting is
Exactly what it sounds like you're gonna be able to select the model and paint where you want the seam to go
So in this particular model, I think that I want the seam to be on the inside
So if I just real carefully and slowly
It doesn't matter if it's straight for me. I'm really just going more for
Hiding it on the inside of the model here and obviously it's not gonna seem across that gap. Oh, oh, I messed up
so what I need to do is
Go ahead and hit shift and the left mouse button and I can remove that selection
And I'll leave the rest of that there. I think I'm just gonna go ahead and and all I'm doing is left-clicking
Okay
And going right up to the top there now each of these three models is gonna have a seam and it's impossible to paint on
All three of them
alternatively, one of the things I can do is take my right click and
We'll increase the brush size here. This is one of the amazing things about
paintability, so I'm gonna block the seam basically on the outside of as much of this model as I can and
I'm right-clicking in order to paint the seam blocker
Instead of left-clicking to paint where I want the seam to go. So
in theory, this should keep the seam from the outside of my model and make it harder to see and
That could come in very handy when printing an all-round model like this
There's really no hard corners for me to put a seam on on the outside. That will look good
So putting it inside should reduce some of the finishing work now as I said, there are some pretty steep overhangs in this model
So let's say that I want to paint some support on here. Yes, you can paint support on as well. So
Left click is going to be painting support
Which means it'll put support right here and
if I right-click
it'll support block right there, so
let's go ahead and
Do a little bit more painting here
Support that area there
Let's go ahead and turn on supports. Now. We'll do for support enforcers only and that's gonna make sure that I'm only
Supporting those areas I wanted to so now we'll slice
We'll go over to preview mode here
and you should be able to see where I painted and where I didn't or where I painted the support blockers and where I painted
the support enforcers, so
It doesn't put support anywhere that I did not paint as you can see both of these openings are still open
But it does put support here on the top as you can see it also winds down on this part here
And on this side, it does not do that because I put support blockers there
So everything seems to be working as it should be as far as painting on supports
These are a couple of the major features. You're gonna be digging in this new version now
They've also made some changes to their SLA programs and things like that as well as one of my favorite things that they have here
I'm gonna go ahead and open this up if I can there we go. Nope. Those are STLs
Let's see if I can find a g-code file. There's one
The standalone g-code viewer that comes with PrusaSlicer is pretty amazing and I can wind down through the layers
This is an object that I had sliced earlier and saved the g-code
but the cool thing about this is if you have a file that's g-code you can go up here and hit export toolpaths as
OBJ and you can get the object back to an OBJ file
so you can change the slicing settings if you want to pull it back into PrusaSlicer and slice it differently or
Things of that nature so really really handy tool really really cool. You can actually go back here and
and and just kind of run through the whole toolpath and
I mean, this is a pretty common feature
For a lot of slicers but to have this standalone viewer like this is that that will convert it back to an object for you
Is kind of nice. So that's basically all we're gonna go over on this version of 2.3
There are a lot of other things so stay tuned
We will have some more in-depth looks at this software coming up, but for today, that's gonna be it
Thanks for stopping by guys. Don't forget to leave a like hit that subscribe button and we'll see you in the next one
Well, that's it guys
That's gonna wrap up this video
If you've noticed the shirt the merch is available
Go ahead and check out the teespring merch link down below
Won't be available on a channel store until I reach 10,000 subscribers and so far. I am just about to hit
5,000 so it'll be a little while a couple more months before you see this on the actual channel
But they are available now
I have a couple other designs feel free to pop over there and check them out and know that any purchase through the teespring site
definitely helps to promote our site here and
Increase the channels ability to make videos in the future. So we appreciate all your support
don't forget to check out the teespring link check out our patreon link leave a like on this video and hit that subscribe button because
We have a lot more coming at you in the coming days