I made this model i fusion360 and 3d printed it in polymaker polyterra forrest green pla, and may i say it looks great in the light, but in the dark it really shines. i used 17 leds and an ardiuno mega to make this cool light up display which can scroll text, show patterns, and be used as a digital clock!
Like and Subscribe!
Want to Support the channel? check out our website for all your 3d printer related purchases! https://www.technivore.club -AND- Subscribe now to get my newsletter, and updates on the LATEST and GREATEST in 3d printing! https://technivore.club/newsletter
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Technivorous channel is brought to you by these fine patreon supporters. Check us out on patreon at patreon.com slash technivorous
Hey folks technivorous here today. We're gonna be taking a look at this cool little light. I created this is runoff Arduino and there are
17 little LEDs in there
I will show you what I did and we're gonna change this to display a different text right now
It's running my wife's name and we're gonna make it say technivorous and go over some of the code as well
So let's just jump right into that right now
Here is my Arduino we can actually I think make this a little bit bigger here
Basically, these are all of those lights divided into quarters as you can see there are four in each quadrant
So quarter one red quarter one yellow quarter one green quarter one blue and that pattern repeats all the way to quarter four
Now quarter one is from twelve o'clock to three o'clock on the clock face
And it just follows it around clockwise like that
I did that so it was easier to program in the letters because they all have
Very similar. It's a lot of copy and paste so I can just change the numeral
The last one is the middle one. I have that set to pin 30
Not that that matters, but that is the 17th LEDs
Basically, I'm setting all of these to output because that's all they're doing and then in the loop is where I'm going to write my
Text so let's change this
And
I've already pre-programmed all of these letters here. I don't have the whole alphabet in and of course eventually
the idea is to
Make it so it just there's a method that takes a string and will
Display, whatever that string is on
The device. So, let's see. I remember how to spell my own name
I didn't realize my name was so long. That's a lot of letters, man
and
Then as you can see we can kind of go through and see okay
So I have it set to do a couple other things where it'll turn on all the colors
Individually and then there's a couple of patterns and things like that that I can vary between
But down here, you'll see where I write each individual character by turning different lights on and off
So the T is written by
turning
Turning different lights in different quarters either too high or low high is on low is off
Let's see how this works here. I'll just go ahead and hit play and we'll jump back over to my other camera
It should take a second, but it'll load up here
There it goes T E C
And you can see it's now displaying technivorous instead. So I think I'm gonna make a font from
this
Characteristic that I see here in these letters, but I really like the way that this turned out and in fact
This is printed in that poly tera PLA that green you see right behind us there. That's forest green
It is lovely stuff. You see a little bit of a seam here
but for the most part these pieces went together pretty much perfectly and
It is a very very nice print. He's a little cleaning and I think I probably
Will give it a good clear coat, although the nice thing about this poly tear is it doesn't really need sanding
It has a very very gorgeous matte finish right off of the printer
That's gonna be it for this video guys. If you'd like to see a little bit more of what's inside this guy
I guess I can show you real quick. It's not much
It's basically a bunch of wiring that needs to be tucked away and the Arduino I'm using a mega
I was one pin short on an uno so we had to go up to the mega
Tried using I guess I could have
used a
Microprocessor and gotten more pins off of the uno, but that would require putting in another PCB board as well. So
this just barely doesn't fit and I'm
Contemplating alternatives, maybe just extending the pinouts on the uno or seeing if I can get
Nano and
Because it has just as many pins as the unit
Well, it's a couple shorter than you know
But you can't use the analog pins to turn the lights on and off because it just doesn't work properly
Even if you set them to output when you set them to low, there's still a low amount of light
So not ideal, but all in all I'm very happy with the way this turned out
Let me know what you think in the comments down below and we'll see you in the next one
That's gonna be it for this video guys pay no attention to the mess going on behind me
Pay more attention to the mess going on on my shirt. Check this out. Finally got the merch available
That's right. Finally hit 10k. So the merch is finally here
Make sure you check out the teespring merchandise bar below the video and thanks for watching
Don't forget to hit that like button and subscribe because we have more videos coming your way
In fact, I've thrown a couple of suggestions videos for you to watch on the screen right now
So go ahead and check those out when you get done. Don't forget to pop over and check out the merchandise
There's plenty of stuff to see and thanks for watching guys