This video has everything you need to know about Cura's support system, from per model settings, to printing a model AS support, to custom supports, and support blockers. learn about the support interface, and how to best utilize curas support sytems for your #3dprints
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Hello folks and welcome to the Tech Nervous channel today
We are going to be looking at support secrets in Kira
So basically we're going to look at the different ways to support an overhang and I'm going to show you some tips and tricks
On how to utilize them most efficiently
So the first thing that you're going to notice is that my overhangs are pretty steep on this particular model
There's very little that needs to be supported and it is a very very steep overhang. So one of the things we want to do
scroll right down to our
support settings and
In here, you have the option to generate support. Once you click that you'll get a few more options right now
My support overhang angle is set to 59 degrees now in most cases
45 degrees is where you're going to want to start you can
print a
Special model that will tell you your overhangs and you can kind of see on that model where you'll be able to print without support
I was good up to about 60 degrees
So I took it a little bit under that and you're welcome to try that as well
But for now, I would recommend just supporting everything over a 45 degree angle until you print one of those tests and you know
What your angle is so?
the most important thing here is the support structure and right now it's set to normal and
When it's set to normal you can choose a pattern
there are several patterns in here and these patterns have a lot to do with the infill patterns, they're exactly the same and
They're just used for support instead. So I tend to stick to zigzag or lines depending on the model
But let's take a look at this real quick. We'll slice it and I'll show you something
So here we are sliced and you would think that lines would be exactly what it sounds like just one line up and down back
And forth with nothing around the edges, but there is a special button in here called connect support lines
And this will put an edge around it that makes it a lot more stable
So it's basically using those lines as the infill and building a shell around the outside
This helps prevent those from getting knocked over because those standard lines are pretty thin
It's one extrusion width and once they get to a certain height, they're pretty easy to knock over and break
So this setting along with all the other support settings can be found by opening the cogwheel and simply typing support
We're scrolling down to the support section now in here
There are a ton of settings
Now the ones with the checkboxes
Those are the ones that you have the option to use with your settings that you have activated
So any of these ones that aren't checked in the setting visibility aren't gonna show up in here
so if you'd like to say use your support Z distance and change that you need to click it and
Then it will show up over here
There's lots of things in here to look at and there are a ton of different steps
I wouldn't go through here and drastically change a bunch of this
Because you'll have a hard time getting it back to the way it was without reloading your profile
So there are some important ones such as support roof and support interface
that is going to determine how easy it is to remove the support from your model and
there is also a
Couple of options for where did the other one go the connect support lines. There's also a connect support zigzag one and
That is right here
And then there is an option for support density and that one's pretty good to have on if I turn that up
I'll get more support if I turn it down. I'll get less support. So pretty interesting
I like to leave that on and be able to adjust it depending on my model
So let's jump back real quick and we're gonna look at a couple other options for support
So there is a setting for per model supports. Okay, it's gonna be over here on the side
We're gonna look at the per model settings
And if you look through here, you can either decide to print the whole model as support or you can modify some of the settings
so let's go ahead and
Look at the support blocker option, okay
Now the support blocker is exactly what it sounds like it allows you to place something on the model to block support in that particular
Area, so let's say I didn't want to support this finger
I could click and it'll put a square there that will prevent it from supporting it
so let's put a couple in here just to illustrate this and
By the way, once you place one you can click out and then click on just that object. These are basically just cubes
It's known as an eraser down here. You can select it down here as well and hit delete
Okay
So let's slice this guy and you'll see that only the little red parts that aren't touched by the support blocker
Such as here here and all around here are going to be supported. So let's check it out
All right
And as you can see this is a perfect example of what we wanted you can still see the squares there
Slightly if you look from just the right angle, let's see if we can get it there. There we go
so this is where we put our support blockers as you will notice this section of support is a lot thinner and actually the
Exact amount of that cube space is missing from in between the middle of the support
Otherwise, it would look like this. So support blockers are working and working quite well. What other options do we have with them?
Well, since it is an object I can take that and I can move it slightly or I can scale it just like anything else
So let's say
We want to do
slightly larger
Support blocker we can do that simply by increasing the scale
you can also rotate and
Manipulate them. So very very handy tool for blocking support where you don't want it in this case
these are extreme overhangs and
You're definitely gonna want to support them
but in some cases when you have a slight overhang over the top of a model you're gonna click support on build plate only and
You're not gonna want to support those parts because you're not gonna want the interface at the top and the bottom
so like I said on this model you would
obviously because you're looking at like a
90 degree angle you have to have support here or it's not gonna print that finger properly
But that is basically the gist of the support blockers now
I can go in here select all the objects for my object list and erase them or I can go in here and
Make some different options
So if I go in here to my per model settings select the model and then hit select settings
I can go in here and actually do support at a different angle. So say for one model
I want to do my support angle at
59 but this model I want to do my support angle at 45
so
all I have to do is hit that and
it changes the settings for me, so
it is
pretty well good to go it stays the same just like that and
There are also some sections that are pretty interesting like don't support overlaps
It's gonna be if two models are in contact with each other
And you can modify the settings of those as well. One of the other cool things you can do
Let me grab another STL real quick
is
Let's see. Let's
This is just a block. We'll use this
Okay, so we can take this model here and print it as support
you can see it becomes checked like that and it is basically going to print as my support pattern and
Not as the object that you're seeing so it'll be that shape, but it won't be solid. It won't have infill
It won't have a top on it. It'll basically just be the walls with the support infill and
Here we see that all sliced and processed if we scroll down here into those layers
You'll see that it is all support as I said looking down from the top
You can also see there is no top on it. It does not have a shell or a top surface
It is now just support
So this option is very useful if you're building a custom model and you want custom support to support just a single area
You can model that in as well and then designate it as support. So these are the support basics
These are the main things you need to know about what to do and how to use support real quickly before we go
I want to cover one more thing and that is one of my favorite support options
that is tree support now tree support for the longest time was a
perk that they kept down here in the
Experimental settings. I don't actually have it turned on here. I'll show you
It has since been moved
Just because they deprecated that
experimental setting so
But it is now in the support section and instead of normal
What you're gonna do is select tree and we'll hit slice and I'll show you these and give you a little explanation of why?
I like them better
Okay, so my fave here is the tree support
So this as you can see is actually using a lot less filament than standard support
It's trying to keep it all in one local chunk here
and as you can see
it basically just creates these tubes that snake around your model without touching it too much and the interface for this to remove is
Super super simple so
Inside here. You won't have any lines or anything like that. There's no no infill or support pattern
This is basically just a single outer shell
okay, so think vase mode and
It's gonna go around the perimeter one time and build that up into a conical support structure
That looks somewhat like a tree because of these branching
Structures so you can go in and change the angle at which you'll allow these to curve and how thick they are and things
like that the standard settings work really really well and
Because of the small surface area that actually has contact with the model the supports are really really easy to remove
So that's why I tend to go with tree support on pretty much all of my prints unless something else in particular is
Required you will also notice that these support blockers did still work for my tree support
There is nothing supported here, even though there should be so if I were to remove those and reslice this
I would get a little bit larger tree
But honestly even with those support blockers in there and this little bit supported right here that should still print
Let's go back and look you can see
This is a little bit of an overhang that might
Might cause some droopage because like I said it is past the degree at which I need support, but
That's kind of iffy whether or not you need that there
We can go ahead and like I said if we remove these and then reslice it we're gonna get thicker support here
I don't think we need to do that. I think you pretty much got the gist of this
So that is gonna be it for this video guys
I hope you learned something about supports and that you're a little bit more
Well versed on how to use them and what settings do what if you have any particular questions or suggestions?
Please leave them in the comments down below. I love making videos like this and teaching people things and
Helping them to understand things they don't quite understand
So like I said if you're curious something you want to know if there's something you think I should know that I didn't go over
In this video definitely leave that down below as well
Be sure to subscribe to the channel
We have lots more Kira videos that you can take a look at we cover several topics
And I am always open to suggestions
Don't forget to leave a like on this video
that is one of the ways that you make it easier for other people who are looking for the same solution to find our
Videos and be sure to hit that Bell for notifications to be kept up to date when we post a new video
I don't just do Kira videos. I have videos on everything from Tinkercad to blender to
Fusion 360 to Kira several other slicers. I cover including ideamaker raised 3d slicer
There's there's a ton
So be sure to check the channel content and stop back often because we're here and we are making videos all the time
Stick around guys. I got another YouTube recommended video for you right here
And if you haven't already subscribe subscribe subscribe make sure that you smash that like button. We'll see you in the next one techniverse out