today were taking a look at creality slicer, a cura clone made specifically for Creality printers, with an exhaustive list of printer definitions and profiles made just for creality printers!
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Hey folks, TechNiverse here. Today we're taking a look at the latest version of Creality Slicer.
This is Creality Slicer 4.8.2. It is actually a skinned version of Kira with a few modifications,
so if you're used to Kira you'll be used to this software, but this is the software they
recommend you use with your Creality 3D printers. That said, let's check out the download page
because that's where this question originated. I had a gentleman who was asking me if I could
update the download link. They've had several versions of this since the last time I made a
video, so here it is. Pretty simple. Creality.com slash download. In here you're going to find all
of their firmware for their EnderCR resin sets and the item that we want in the software tab,
the first tab that opens up on this page. And as you can see, there's several different versions.
The first one listed as Creality Slicer is a Mac build. The second one is the one that you're
going to want. Now this is the latest update. There is a more stable version down here,
but that isn't the latest version. We got the latest version, so let's jump over and check
it out. We're going to get started here. Go ahead and read the disclaimer. Hit agree,
and it's just going to run over basically the same stuff that the Kira does when you launch it.
All of the machines in here are Creality machines. We're going to go with an Ender3 v2 because I
have one sitting here. We're going to hit next. I'm going to go ahead and turn the volume down
on my phone so you don't have to listen to all that dinging as it happens again.
There we go. You can see we have all of our stuff programmed in this program by the people for Kira.
It does have a purge line in here and all of that good stuff. Let's go ahead and hit next.
We should be all set up. Now as you can see, this is very familiar. It looks almost exactly like
Kira. I do have Kira open. We can jump back and forth. If I open the settings tab here and go to
custom, you can see that they have changed the color of a lot of this stuff. Basically,
let's drag this. Basically, it's all the same settings. In Creality Slicer, it says shell
instead of walls, but all the settings are still there. There is a lot of cool stuff in here.
Of course, it has tree supports in here as well. You can go ahead and let's see.
Oh, wow. Actually, I thought it was updated to have tree supports, but it does not have tree
supports. That is a big downfall. Most of the time when I use support, it's tree support.
This slicer can be used perfectly fine in conjunction with the printers that are
programmed for it. You can also add your own custom printer. It doesn't have to be
a Creality printer. Let's go ahead and pull in that same rod model here. Now,
this is just a simple cylinder. As you can see, it shows up in yellow right off the bat.
Let's get a quick slice and see what the standard settings look like here.
Pretty quick to slice. Jump to preview mode. The color scheme is not bad. It's pretty crisp.
There are ways to make your own color scheme and do this all on your own. You could put your name
here instead of Creality. You can change that. As you can see, though, it is exactly just Kira.
They do have a couple of extensions in here. Anti-warping. That's got to be a draft shield.
That's kind of cool. Support blockers, custom supports, per model settings, all that good
stuff. Looks like the infill is set to trihexagon there, or triangular. Pretty simple, guys. This
is the slicer that is meant to operate for you on your Creality machines. If you are going to
download this slicer and check it out, definitely do. It's pretty cool. There are some other color
schemes here for preview mode. We're going to go back to compare and go ahead and just close this.
Definitely worth checking out, but it is pretty much the exact same thing as Kira.
You'll notice that in Kira, I have settings that I don't have in Creality Slicer. It's not as pretty
colored here, but that doesn't really matter. You can always just change the color yourself by
changing the theme. That is found by going to preferences, configure Kira. The theme is right
here. You can pick any of these. You can also make your own. I have a few that are available.
For the most part, that is the only major difference. There are a few more tools,
as I said, in Kira than in Creality Slicer. Definitely, definitely check it out if you're
using a Creality machine. It does lead to some pretty nice prints with the settings that they
have programmed in. As you can see, when I add a printer in Kira, let's try this real quick just
to demonstrate. I go to printers, go to add, and add non-network printer. Now, if I go to
the Creality section, see it's got all these other definitions in here. If I go to the Creality
section, it's got, let's say, 5, 10, it's got about 18, 19 different options. In the Creality
Slicer version, let's try this again. Extensions, configure Creality, printers,
add, and as you can see, they have a lot more definitions. Each of the individual variations
has its own definition. There are a ton, a ton of Creality profiles. Check it out.
Let me know what you think, guys. Leave any questions you have in the comments down below.
I am putting this up in my Kira questions playlist as well because there are people who are curious
about the differences. Really, Kira is a better piece of software in general because it is a
little more advanced, but Creality Slicer is right behind it and dedicated to Creality machines. If
that's what you're running and you run them consistently and pretty much only Creality,
definitely go with this slicer. That's going to be it for this one, guys. We'll see you in
the next video. I appreciate you stopping by. I know there's nothing fancy going on here.
If you have any questions about how to run this, like I said, you can just check out my Kira
videos. I'll put a little playlist up in the corner here, actually way up there at the top,
that will have some Kira settings in five minutes or less. It'll go through each of
these individual settings and they do still all apply to the settings in Creality Slicer.
Please, if this was helpful to you, leave a like down below. Don't forget to hit that
subscribe button and smash that bell icon so you can get notified when I post more videos. I do
quite often post videos on different slicers, checking them out and comparing them,
so if that's something you're interested in, definitely, definitely subscribe to the channel.
We'll see you in the next one, guys. Tech Nibbers out.