this is the latest cura software beta! keep your old version. in version 4.11 there is a big update to the UI buttons, as well as an addition of monotonic fill for top and bottom surfaces, making smoother prints.
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Hey folks, TechNiverse here. The new Kira 4.11 beta is out. They've revamped the UI. There's
literally a hundred new button changes and everything should be in the same place. They've
just kind of updated the looks. There's also an awesome new monotonic fill mode which I'm anxious
to check out because it should shave off a lot of time on prints with low infill. So let's jump
right into it. I have it downloaded. We're going to load it up right now and jump right into this
on the TechNiverse channel. If you haven't already, make sure you hit that subscribe
button but stick around because today we're going to be talking about some pretty interesting stuff
I don't think you're going to want to miss. I've included the download page. The link is down below
and I grabbed the 4.11.0 beta AMD 64 version. That is the one that I always use and it should
work well if you're using a Windows device. If you're using Linux, you're going to want to go
Darwin. Basically, it's simple. Keep your old version just in case this is a beta and if there
are any bugs, you don't want to delete your old version and delete all your old profiles and
things like that. So definitely, definitely, if you're going to check this out, keep your old
version and let's see what's new. Here we are. It's the first load of the new Cura. It's saying
complete UI refresh. Look around. You'll notice that we've refreshed over 100 icons throughout
So that's the first thing that I want you to note with the what's new.
Improved digital library integration. They've been harping on that for a while but it's really
only Ultimaker machines. This is one of the other ones I'm excited about. So this is monotonic
ordering. So basically, it's going to try to print in as many straight lines as it can without
jumping around like it does over here. So this should be a great time saver because it should
reduce the unnecessary travel moves of say printing from here and then going over here
and then going back down here. So that's one of the things I'm looking forward to checking out.
And yeah, that's basically it. There's a little bit more in here but nothing too special. So let's
go ahead and skip through this and we can see the release notes. So monotonic ordering, that's one
of the first things we're going to look at. Let's see if it tells us where it's at. Prints with
smoother top surfaces, especially useful parts that need good aesthetics. Okay, so it's for top
surfaces and bottom surfaces it's saying. So complete UI refresh, we already knew that.
This save material profiles to USB. Some people are going to get excited about that but it's really
only for one printer. It says right here the Ultimaker one printer line, the S line. So this
is another thing I'm excited about. Notifications for beta and plug-in releases. As you know on the
and I like to show you the new features and look for the bugs and I encourage everybody else,
if you find a bug, to let Ultimaker know. But this is one of the places where you can go and
set a notification to see that there is a new beta or a new plug-in. So that's the first thing
I think I'm going to do. And I would assume, oh I can already see right off the bat they've
changed this icon. That's the first thing that drew my eye. I see a few more in here.
I don't know why I have this. Let's go select another simple material. There we go.
Discard changes. We just talked about that in the last Kira questions video. If you watch my Kira
questions series or if you have questions about Kira, leave them in the comments. I'll make your
own video. I have a playlist of just people asking questions and I answer them. I'll actually,
I'll put a card for that up in the corner up above my head way at the top there
and you guys can check that out. But we were going to look at configure Kira and see if it
says in here, okay check for updates on start, stable and beta releases is checked. It's
checked automatically so that's good. You don't really have to go looking for it. And notifications
for plug-in updates. That's something that is pretty cool as well. So okay, we don't need that.
I do want to grab a model. I think I have one around here somewhere that is relatively flat
and we can check out that monotonic mode. So let's go up here and see. They've changed all
of the icons in here. This is looking good. A little bit more descriptive. Okay so walls,
top, bottom. Let's see if we can search it up here. Yep, monotonic, tonic, top, bottom order.
Okay so without it checked, let's slice it real quick. See what it gives us for a top pattern
here. Then we'll turn on, this one shouldn't be too broken up. I mean top layer really is just
a circle but yeah I don't think this is going to work. Let's grab something a little bit more
complex. Let's say this. This shouldn't be too complex but it should be complex enough. Let's
slice this and what I'm interested in is the order in which it slices the top layer here. So
if I scroll back through this layer. Okay so it basically is doing the outline. Then it's
going to fill it here. Then it's going to go over there. Then it's going to go over here.
Okay so let's try it with monotonic on. Of course we need to slice first. It doesn't slice itself.
You can set it to but I don't recommend it. It actually kind of bogs it down because it's
constantly trying to slice. So this one is okay kind of the opposite. So it's going to start at
one end and this is the purpose of this and it's going to go all the way to the other end before
going back and filling in those pieces. So a different path. We have two hours and 16 minutes
with monotonic on and two hours and 16 minutes without it. So it does take a different path but
the time to complete was about the same because of those weird travel moves. Very very interesting.
Let's take a look around at some of the other buttons that they have. Curious to see. The
is now a spool icon. Speed is like a tachometer icon. A lot of these are just a little bit
thickened. I like that they changed the special modes is now a star and experimental is still
kind of a beaker but a little bit less interesting. A little bit more bold outline of it.
That's basically the gist of it guys. We can see they have a lot of stuff over here too and
I actually I need to look at this. So the scale move and rotate buttons are all different.
The mirror button per model settings. That's my support blockers. Yeah quite a bit has changed
in here. I wonder if they've changed any of the management menus. No that looks pretty much the
same. Yeah so a lot to take in. I do like the UI revamp. I do like the new buttons.
Still hasn't changed the function of Ultimaker Cura and everything is basically still here.
Anybody who looks for their settings by picture it's going to take a little adjusting but
that's not too big of a deal. We always like when they put in the little details
things like that. So I'm going to do some more playing around with this monotonic infill. You'll
see a video on that in my Cura settings in five minutes or less video because it is definitely
something worth exploring more. So if this video has been helpful to you guys leave a subscribe
down below. I definitely would check out the beta and test out this monotonic infill or this
monotonic fill. It looks pretty cool and the new buttons are definitely worth a look as well. If I
find any bugs I'll let you guys know but other than that that's going to be it for this video
guys. TechNiverse out. Stick around guys I got another YouTube recommended video for you
right here and if you haven't already subscribe, subscribe, subscribe. Make sure
that you smash that like button. We'll see you in the next one. TechNiverse out.