PrusaSlicer 2.4 is (nearly) out and it comes with loads of new, useful features and improvements. But you dont need to own a Prusa #3dprtinter, you can still make use of them and set up PrusaSlicer for basically any machine! lotf of cool new features!
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Today on the tech neighbors channel, we're taking a look at the all-new Prusa slicer 2.4 alpha
So this version is not fully released yet
We're gonna take a look at some of the new features and I don't think you'll be disappointed. So stay tuned
Here we are in the all-new alpha for Prusa slicer 2.4
0.0 and as promised we are going to take a look at some of the new features now
There's some pretty exciting stuff in here before we jump too far into that
We're gonna go over to the new features page and I want to take a look at a couple of things because there are a
Couple of things of note in this version. We are gonna glaze over a lot of this because I'll be showing it to you personally
but I did want to find two sections in here the first being
the
Removal of negative volumes modifier and extruder overriding values. So this is basically
Making it a lot easier it says here
There was a similar way to remove pieces by setting the zero number of top bottom layers blah blah blah
Basically, they made this just a button
All you have to do is click and it works
We're gonna be checking that out in just a second. The other thing I wanted to look at was this blurb right here
So this is a thank you to Kira for staying open source
They've ported the popular fuzzy skin feature from Kira in a Prusa slicer
Now the thing I want to point out about this is I really really appreciate these guys doing this
And also thanking Kira Kira has been known to take a couple of things from them like their range algorithm and things like that
So it's nice to see them competing but also willing to work with each other in order to make them better
So that is really really cool. We'll take a look at that as well some other stuff in here
The last thing I wanted to show you in here. Sorry about all the scrolling is
This one right here. This is sign mode
So from now on it detects when it thinks you're printing a sign and it'll ask you if you want to put
Layer separation in there. So we're gonna take a look at that as well. Let's jump over to Prusa slicer and see what's good
All right, so first and foremost the first thing I wanted to look at here let's grab us an STL I have
Several we're gonna grab a sign that I just made to test out this
Sign system now here. I have a flat file and then I have two different height variations. So the
Techniverse text and the border are at two millimeters and the 3d printing text is at one millimeter
So in theory, it should detect that it should be able to tell that this is a sign
And it should ask us if we want to slice it separately. So
Let's click the slice button
And here it is. Here's our note. So let's apply auto color change to print and
Click yes
Okay, so now we're down at the bottom if we scroll all the way up we see that we have three different colors here
So it's gonna give us two
M 600 commands you can see here
and
That is going to manually stop the printer so we can change the filament and change the colors to finish our science
That is a really really handy thing to have in there
If you do a lot of sign or multicolor printing and I really really like that quick addition
So, let's see. What else we got
we're gonna go back to the platter here and remove this guy and
I'm gonna bring in another random file because we're just gonna cut a hole in it. I'm gonna show you how easy it is
To use this new feature. So I have a bottom of a computer mouse here
And let's go ahead. Let's get a good view of it and
We will grab it and we will click right here. And I think we'll just say
Add negative volume and you need to choose a box a cylinder a sphere a slab in our case
We're gonna load and we're gonna grab something a bit funky. So, let's see I have
Want something that's not regular let's do
This should cut a bunch of pieces
So we'll grab this model. We'll drag it over here
If you remember it's printing. This is a negative volume. So all we need to do is make sure that it's going through the model
Bottom there slice this guy and it should show several holes in the model and not show that second piece
In fact there you are it's leaving outlines of all the models, excuse me, sorry about that
Leaving outlines of all the models that we cut out so you can do that with
Simple models complex models. It's actually really really fast and a little bit simpler than Kira's version of doing things
So I'm very very happy with that as well
Now one of the other things we wanted to look at in here was fuzzy mode
So let's go ahead and add a modifier here. So let's go to add part
We're just gonna load a sphere like they do in the preview of this on the page and we're gonna drag that over here
Add settings fuzzy skin
fuzzy skin
Okay
fuzzy skin
We actually need to make this
modifier
so I
Think I did that right? We'll find out when I slice this it should yeah, there you go
So it's putting fuzzy skin on the area that's in contact so right here right where that sphere was touching
Pretty cool little trick for just fuzzy tizing a part of it. It does also do the inside something to be aware of and
Yeah, that is pretty pretty cool
Now there are a couple other additions in this version of Prusa slicer that are worth a look so I definitely recommend
Downloading the alpha and checking it out
But as with Kira you always want to keep the old version if you're working with alpha or beta software and make sure that you're
Not overextending yourself or getting rid of something that you need
So the setup on Prusa slicer pretty much the same as always there are a few new printer definitions in here
I was able to get the artillery genius up and running and my print quality is pretty spectacular. So
That's gonna be it for this video guys. I hope it was helpful to you
I'm looking forward to the full release of Prusa slicer 2.4
And there are some new additions in here that are really really handy them. It's important to note
We didn't go over everything
there are some new mesh fixing tools and things like that that are pretty easy to access as well and
I'm not sure if this is the final
Addition set before I mean they might add something else in the beta before they do the final release and they'll probably change a few
things and
Take out a couple of bugs
But I love love love the new tools in this version and I'm definitely recommending Prusa slicer from now on
I am a big care fan for sure
But it seems like Prusa slicer is going in the right direction with with a lot of these upgrades and it's nice to see them
Working together, you know, I jump back and forth
Prusa slicer is one of those things where you can get a lot more settings out of it
But you have to be a lot more particular about
Making sure each setting is set right each time or that you're in the right filament or you're in the right printer
Because mistakes happen pretty easily here with all of the tons of settings they have you can see if I go to expert mode
There's quite a bit of stuff so we can click the settings you can see all of these parameters in here
So if you're new to Prusa slicer, definitely start off in simple mode and get used to it
But if you are a little bit more advanced and you like more settings than you can get from your Kira slicer
Definitely check out advanced and expert mode in Prusa slicer. You won't be disappointed
It is very very well put together and there's a lot of stuff that can give you a really good print
If you know what setting to change, so we'll see in the next one guys
Don't forget to leave a like and hit that subscribe button
Stick around guys. I got another YouTube recommended video for you right here
And if you haven't already subscribe subscribe subscribe, make sure that you smash that like button. We'll see you in the next one techniverse out