Today on cura questions lets go over how line width and wall width effect the wall line count variable. it dosnt work the other way unfortunately Like and Subscribe!
Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Want to send me something? Technivorous 902 n Hughes Blunt Sd 57522
AI Generated·May contain errors
Video Summary
AI Generated
This video explains how to correctly manage wall thickness and wall line count settings in Cura. The host clarifies a common point of confusion: wall line count is dependent on wall thickness, but wall thickness is not dependent on wall line count. Users must adjust the thickness value first to automatically update the line count.
Hey folks and welcome to the Tech Nibbers channel. This is Kira Questions. If you got questions,
I'm here to answer them. So if you have any Kira questions, leave them in the comments.
Today's question is about line thickness and wall line count. So stick around.
And as you can see, that's giving me a wall line count of 7. Now as I said,
we can go as high as we want with this.
And at a certain point it's going to tell us this is thicker. The reason that it's orange,
it'll still slice, it'll still work. The reason that it's orange is because this is thicker than
our actual model. Obviously we don't have anything displaying here, but this is going to give us a
100% infill and basically disregard our infill completely. But let's just take a quick look
because you can actually print with a 0.4 nozzle at 0.5. It's one of the natural properties of
the extrusion process is that the second it leaves the head, it expands a little bit. So
this can be a good way to get rid of some extra artifacts and stuff like that. But what we're
going to do is just go through and get the adjusted wall line count here. So let's do one,
we'll give us two. And then if we do five, it should give us 10. So pretty simple,
pretty straightforward. The only thing that was going wrong in your case, as I said,
was that you were doing it backwards. And it's a pretty common problem. So don't feel silly.
It happens pretty much to everyone until they figure out that, yeah, you can do it one way,
but not the other. So I hope this video was helpful to you. I hope you don't feel like
I'm patronizing you. Honestly, this is a simple mistake, but lots of people make it.
I myself am guilty of it. I've sat here for several minutes at a time over several different
sections wondering why won't it change? And then I realized, oh, well, I have to change it back
and then it'll ungray it. And then I have to change the wall thickness and not the wall line
count. So if this was helpful to you, make sure you leave a like on the video. Don't forget to
hit that subscribe button and drop your Cura questions in the comments. Also ring that
notification bell and you can get notified every time we put up a new Cura questions video. I tend
to do this at least a couple of times a week, if not a couple of times a day, depending on the
volume of questions coming in. I will put a card up at the top there. If you go to the very top
and click that, it'll take you to my Cura questions playlist. There's already over 25
questions answered on there and we're adding to it all the time. So that's going to be it for this
one, guys. Thanks for stopping by. TechNiverse out. Hey folks, and welcome back to another Cura
questions video. Today's question is from Ice Wolf and he is asking, by walls, there's a wall
thickness of 0.8 millimeters and it's grayed out. Then you set the wall thickness to three,
but it doesn't adjust the 0.8 millimeters. It's still prints at 0.8 instead of 1.2,
which would be the results of three lines at 4.4 millimeters and I'm unable to change it. I
use Cura 4.8 and 4.10. Both do the same on my laptop and PC. Do you have the same problem? Well,
in fact, everybody technically has the same problem. The only thing you're doing here,
and I know this seems simple, but you're just doing it backwards. So let me show you real
quickly the right way to do this. So you can see I have wall thickness selected here. First,
let's take a look at my line width. It is set to 0.4, which is the same as what you're using.
So this should work for you pretty easily. Just remember that that is going to be what you're
dividing your wall thickness by to get your count. So basically at the moment I have it set to 1.6.
Let's go ahead and take that down to 0.8 and that'll give us two wall line count. Now you can
see if I take the wall line count itself and I try to adjust this up to four, it doesn't double my
wall thickness. It just grays it out and it still tries to do four lines at that thickness. So this
setting is dependent on this setting. Okay. But wall thickness is not dependent on wall count. So
kind of counterintuitive. You would think that one could adjust the other having all parts
of the equation, but it just doesn't do that. So if I want to get a four line count, I need to
first change this back, which makes this part accessible. And then I want to 1.6 up here and
it'll automatically adjust down here. Now I can go up as high as I want. 3.0 if I want thick walls.
Stick around guys. I got another YouTube recommended video for you right here. And if
you haven't already, subscribe, subscribe, subscribe, make sure that you smash that
like button. We'll see you in the next one. Tech Nibbers out.