Send me a gwei! (ether address, all donations accepted!) 0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c send me a satoshi! (bitcoin address, all donations accepted!) 31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Current Channel Goal: 25,000 Subs!
Hey folks, TechNiverse here. Today we're taking a look at the all-new Akira 4.13. That's right, 4.13
has dropped today. It is officially out. You can get it at the download link from the Akira website
and we're going to be taking a look at some of the new features. So when you open a new version
of Akira, oh, I want to point out, make sure you keep your old version. Sometimes there are flaws
with these versions. They did release a beta. I covered a video on it and I didn't notice any
major bugs, but you don't want to run into any issues down the road or lose your profile. So
keep your old version for a little while, at least until you're sure that this version works properly.
Well, let's go over some of the new things. So the increased print speed, this here mostly applies
just to Ultimaker printers. And it says the last release they focused on quality and now they're
increasing productivity. So they've increased their print speed to make it two to three times
faster. And it says right here, these are profiles for the Ultimaker S-line 3D printers. So not really
going to apply to us since we're not using Ultimaker machine. Let's move on. Seamless cross
platform synchronization. This gives you access to seamless. This is also stuff for, I mean,
there's a few things in here that are useful to anyone, but most of it is just for Ultimaker
machines. So, and then the enterprise level boost means you got to log in, blah, blah, blah, all
this stuff. Another step towards making it pay to play is the way they're going, which might be
another reason you want to keep your old version for sure. By registering to Ultimaker Essentials
free, you get access to a wide range of advanced functionality. Now, a lot of this stuff says
upgrade your Ultimaker. So again, that's really just the Ultimaker printer. Beginner's guide to
FFF. So in here, there might be some interesting things to help you out with your printing
problems and printing woes, but I haven't delved too much into it. It is an interesting concept,
but you see these all over as like ploys for different companies to try and get you to,
I guess, return to their website repeatedly, which makes sense, I guess. Just not really
something I need. So we're going to hit next and we can actually see the differences here
as opposed to those fancy pictures they show. So they have a 3MF thumbnail. That means if you
export to 3MF instead of STL, you can see a thumbnail and that's pretty cool as well.
Infill density automatically changes to zigzag for Ultimaker print profiles at 100%. I don't
know what that's about. And then the user login thing that they were talking about.
New print profile, speed print profile for the S-line printers. And you can sync material
profiles, which we might play around with and do a video on, but I mean, this is just the S-line as
well. So I want to look into some of these things, but for most viewers, we're using Creality
machines and things like that. So other new features and improvement, improved TPU top layers,
added a warning icon to show which extruder is causing the configuration to not be supported,
shows the what's new page with every build, speed uploading of settings list. The load time in this
version was actually really, really fast. They're getting better about that. It used to take
forever and a day for Cura to pop open. And they've really reduced that time lately. So
build volume temperature change, allow plugins to have multiple views. Okay. Yeah. So that's
basically it for the new stuff in Cura 4.13. I do keep a running tab of these. This is in a
playlist of my Cura versions and settings, and you can find a description and explanation of
what's new in pretty much every version, as well as some dedicated videos on different things.
I did want to point out that if we go to configure Cura here, there is a button.
Where is that? Opening and saving files. There it is. Updates down at the bottom. So you can
have it check for updates on start, and you can have it check for not just the actual release,
but the beta as well. That way you can always have the latest version, or if you want to do
some beta testing, let them know if you find any bugs. If you do, please report them to Cura. They
thrive off of that. That's how they figure most of their problems out and get them dealt with. So
really, really quick to deal with major problems. It doesn't seem like there's anything really
majorly wrong with this version. So we're going to play around with it, do some testing,
but super, super fast, and I definitely recommend giving it a go, guys. That's going to be it for
this video. Don't forget to hit the subscribe button, leave a like. I'll put a playlist up in
the corner. If you hit that, it'll take you to my Cura settings in five minutes or less playlist.
In that playlist, I go over each of these settings one by one and tell you what it does
and what other settings it interacts with. So you might find that useful,
definitely pop over there and make sure you ring that notification bell to get notified
when I post a new video. Oh, I'll put a card up, another card. This is my Cura questions playlist
where I answer questions in the comments about Cura. So if you have any Cura questions,
please be sure to leave them in the comments and make sure you leave the word Cura in the
question. That's how I search through all the comments I get to find that question. So that's
going to be it for this one, guys. Tegniverous out.