today we are looking a using lightburn to laser engrave some wood, and we want to find out our ideal speed and power. sow we are creating different layers with different settings to find the ideal setting in just one burn! i love laser engravers!
Like and Subscribe! check out these other cool channels!
Send me a gwei! (ether address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692 send me a satoshi! (bitcoin address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692
Current Channel Goal: 25,000 Subs!
Hey folks, Tech Nervous here. I just got another new laser engraver and we're going to be testing
it out. Today I wanted to show you how to use Lightburn software to create a test palette
for the item that you're working with to get different burn depths and settings for the same
material. So we're going to jump over to Lightburn and we'll take a look and I'll show you exactly
how to do this. It's pretty simple but very effective and what you end up with is a tile
or card like this that will tell you your speeds and what you get. You can see on this middle one
here it actually didn't burn anything because it was going really, really fast. So I did make
sure to label these. We're going to do a longer one of these and flip it up this way and get a
variation of different settings now that I know I want one somewhere between here and here. So
I'm going to show you exactly how to do that and we'll just get right into it. All right,
so this is Lightburn software and I personally am more used to using Laser Gerbil because it's
I've used with my other machines in the past but this one works with Lightburn and it works
really, really well. So we're going to take a look at the three different layers I already have here
and I'm going to show you how to add another layer and so on and so forth. Basically what
we're going to do here is we're going to take this one and I wasn't too pleased with it
so we are going to alter the settings a little bit. So I am going to take a look at my card here
and I want to change this to be somewhere in between these two. So what I'm going to do is
I'm going to change the speed, okay, and this is in millimeters per second and I'm going to change
it to let's do 33 millimeters per second. Same speed as above and then it's going to give us
really dark and that's going to give us a light. So we want something in between. Obviously we're
going to go with let's try speed 67, max power at 60. Okay, so now we should get a variation from
dark to medium to light here. So what I'm going to do is I'm going to take this one
and drag it down to about here. Do the same with this. So now I want to take and add another one
of these in here. So I'm going to control c and what I'm going to do is go down to the bottom
here and select another layer. Hit control v. Okay, so it changed this one to layer three
but it put this one down here. So this is the one that I actually just altered. So we have our
our medium. This is the one I want to move. So it's kind of counterintuitive where it puts the
copy in place of the old one and not vice versa. What we're going to do is we're going to go ahead
and copy another one of these real quickly and now we have all of our layers here. Okay,
so let's get these and this is the order that they're going to print in.
So we do kind of want them to go in order. So one show and go down. That one's going to go up
to there. Okay, so now this is our third or fourth, excuse me. This is last. So let's
compress these. Got these all out of order but it's okay. We'll fix it. Let's do this there,
there, and they're not perfectly aligned on the left here. So
okay, so this is good enough. It doesn't need to be exact. So what we're looking at here is
this scale, right, where we have different powers and actually let's just start this over here.
Change the speed here to 25. So that's the first one. That's the second one, 33.
That's the third one. Okay, so let's do 45. Okay, and make sure we're in the right place. Okay,
so this one we will do 60 and 60. Let's do 70. I don't know, 60 and 70, not 70 and 70, 60. Okay,
we want to keep our power the same. So all we're adjusting is the speed and we're going to note
the varying effect on what it is and then we'll leave that one at 100. So small jump here,
a little bit bigger, a little bit bigger, and then the gap in there. So what we should see
is the darkest here because it is, do I have that right? Yeah, it's moving the slowest,
so it's going to create a deeper burn. And then down here, this should be the lightest. So let's
go throw this on the laser and we will come back and see what we got. And here we are, we're ready
to carve. I'm in a separate room on the floor because there is much better ventilation in here.
Let's go ahead and kick this guy on. And I do have my laser glasses on. It looks like we are
well short of the edge of that, so we're doing pretty well. And a little bit of carving footage
here. And remember, according to our G-code, this should be the darkest of our tags. I guess we'll
see at which point it gets too light. Basically, we're using the same amount of power and increasing
the speed. Now, we're nowhere near the maximum speed of this thing, but we are at 60% of the
power, which is pretty good. And we're getting a nice decent burn. We could go a little bit darker
by increasing the power or decreasing the speed a little bit more. But as you can see, it is moving
faster now. It has completed that first one. We'll just kind of watch and see what happens.
So far, pretty pleased with this laser engraver. Really, really happy that it works immediately
out of the box with light burn, because I had some issues with any slicer other than Gerbil
on the first few that I tried. But yeah, this is amazing. I'm going to let this go ahead and
continue, and we'll get a good look at this when it's completely done. And I'll show you the
difference in the five different ones that we created, and we will label them so that we can
remember for future use and kind of use this card as a flashcard for this material. So what did we
end up with? Well, as you can see, our fifth one didn't print at all, and the fourth one is really,
really light. But I do have a nice scale of varying ranges. So what we're going to do here
is increase the power and decrease the speed slightly, and see if we can get a more varying
range. There is also a little bit of shakiness down here, and because we're using higher speeds
and lower power, it is causing shakiness or jerkiness in the machine. So slowing the speed
down and increasing the power should achieve a similar effect, but without that jerkiness,
get a little bit cleaner of an engraving. So let's check it out and see if it works.
So it's a combination of two things that's leading to the depth and darkness of our
engraving. And that is, as we've spoken about throughout this whole video, the speed and the
power. Now, as I said, we want to reduce that jitter. And honestly, we're not moving very fast.
This thing can move a lot faster than this. Maybe that's part of the problem. So we're going to try
a few different things. So to measure the exact effects of this, here's what we're going to do.
We are going to raise the power on each of these. Oh, I made a mistake. That last one
didn't show because it was at 20. That's okay. We'll go with four of them. We'll just delete
that altogether. Delete. Okay. So what we're going to do... Yeah, mistakes happen. Let's see.
70. 70% max power. And we'll leave the speed on that one. It should be pretty dark.
70. Okay. So now we've raised the power. So what does that mean? It means at the same speed with
higher power, it's going to burn deeper into our material than it did at the same speed at lower
power. So pretty obvious and intuitive, but let's jump over and burn this guy and see what
the difference is between our other burning. All right. Engraving round two. Let's hit the button
here. And remember, this is just slightly more power at pretty much the same speed. So they
should be slightly darker than the ones above. And what this is going to do is give us a larger
variation of scales to choose from when we decide exactly what darkness we want something to be.
And it'll also let us choose what our darkest value is going to be if we're doing something
pixelated or something like that. So we'll let her finish up there. And here we are. We're back.
And as you can see, we have pretty similar results, but there are a few glaring and noticeable
differences here. Mainly the 7070 is a lot more in depth than the 7060. So you can see that a lot
better. So that's kind of the scale we want to be in right there. So we don't get this patchiness
as well. So with the power up at 70, I think that's where I'm going to be using this material
the most. And you can see that most of the other layers are very, very similar, if only slightly
darker at just the right angle. But the big difference you get in that bottom layer,
that tells me that the power increase was a good idea. That's pretty much the gist of what we're
going to touch on in this video. So I hope you guys liked it. Don't forget, till the end of May,
we're taking donations for a fundraiser. You can find the video about it here and the links in the
description. So head on over and contribute to a worthy cause. Be on the lookout for match days
where I'll be matching donations until my available funds are depleted. If you're curious
about the next match day, follow me on Twitter. I'm at Technivorous. That's it for this one.
Technivorous out.