Whats coming up on technivorous 3d printing?

Hey folks and welcome. I am TechNiverse. As you can see, we've had a lot going on. We've moved into a new space. We finally are starting to get some of our printers set up, though as you can see, we still need to do a little bit of dusting and maintenance. However, pretty soon you're going to have videos coming at you about what comes the best out of storage for retaining its easy to print printability, such as the Ender-3 v2 or the Mingda D3 over here. This actually of all the printers, and I have several more under the table here that you'll see later. Of all the printers I've pulled out of mothballs, this is probably the fastest, easiest, and best printing result to jump right back to. We'll get into that more later. Right now, let's take a look at the Tronxy. I have several videos that I've put out about that lately. We've finally gotten some good belt tension due to some good belt links here that we 3D printed, and the link for that is in another video about the belt tension on this specific printer. You can hear it when I pluck the strings. You get a nice good pluck there. They're nice and tight. I've been getting amazing prints off of this thing since I switched over to Marlin firmware, so if you're interested in finding out how to switch from your current firmware on your board to Marlin, I definitely recommend you stick around. We're going to be doing some more MSLA stuff now. Don't mind this giant mess down here. Not much I can do about that. Limited on room. However, I do have a lot more room than I had before, so we are going to do some awesome things. I appreciate you guys sticking with me so far. We recently crossed over 20,000 subscribers, and I am stoked on that. It's been a while since I've been able to post regular videos because we've recently been moving and transitioning into this new space, but now that we're here and I've got things set up where I'm nice and comfortable, I think we're going to do some awesome projects, and I think you're going to have some amazing videos. As I said earlier, make sure you reduce your Z offset on that subscribe button down below and give it a good first layer of squish, and make sure that you know you're going to be linked in for all of the coming videos because there's going to be lots of stuff. I'm going to pile it on you. We're going to get back to the good old days where I used to drop several videos a day, but for now, I'm focusing on getting a good calendar filled out of regular drops. We're coming about 10, 15 in the morning central time and dropping a video every day if possible. That's something that I'm going to work my way up to, although I don't think it should be too hard. We used to drop several in a day at a time. I do have a lot more endeavors, enterprises, a lot more things going on these days, and I would love to explain that to you in more depth, but for now, I think let's just stick with the 3D printing. If you want to know more about that, make sure that you stick around. That's going to be it for this video, guys. TechNiverse out. I hope you enjoyed the update and that you stick around for future videos because we have a lot more coming your way, and I appreciate you guys supporting me as far as you have. That's going to be it. TechNiverse out, guys.