Welcome to the channel! today we're getting the Tronxy X5Sa Pro out of mothballs, and upgrading the belt clips with this amazing stl i found at https://www.thingiverse.com/thing:2832399! Stick around for more Tronxy videos, and yes, i am going to dust it now!
Wanna help me out? Join WEBULL TODAY! and get free stocks! all while helping the channel grow! its a win/win!
Send me a gwei! (ether address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692 send me a satoshi! (bitcoin address, all donations accepted!) 0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692
Current Channel Goal: 25,000 Subs!
Hey folks, TechNibbers here. Today we are upgrading the Tronxy again. This is a Core XY machine and
we're going to be putting some belt clips on. These belt clips are amazing. They work really,
really well and offer for easy adjusting. So make sure that you reduce your Z offset on that
subscribe button and hit that little notification bell. Give it a good first layer squish for me,
and I'll show you exactly how to attach these belt tensioners. First things first,
these belt tensioners aren't exactly new. They are a clip called belt sleeve on Thingiverse
by Greg Ware sometime back in March of 2018. So all credit goes to Greg Ware here,
and it is thing number 2832399. So make sure that you grab this. They come in super handy. I've
used them on my other CNC machines as well. Big ups to Greg Ware and thanks for the file.
All right, welcome. Here we are. We're taking a look at my Tronxy X5SA Pro. This thing is a beast.
Recently pulled it out of mothballs. It's still a little bit dirty, so we're cleaning it up.
We're going to make a few modifications today, and this one is going to be some clips that should
help us tighten the belts. As you can see, they are... Well, let me see one that you can see on
camera. They're pretty loose here, and we want them to be a lot tenser than that. So I'm going
to show you how these clips work here. It's basically just a little clip with two holes in it,
and you're going to feed it through the bottom hole, and you're going to fold it over on itself
to where you want it, and you're going to slide it on and lock them together. A really,
really good system for doing this. If you have too much extra cord, you can put it back through
the top notch. We're going to do this with all four corners. So I'm going to go ahead and clip
these zip ties, start putting these on, and I will show you how much tighter the tension is.
Right now, it is pretty loose. As you can see, I can get my finger all the way in there. I shouldn't
be able to do that. That's way too loose on both of them. So we're going to take care of that with
these clips. All right, so that's one clip on. It's this bottom belt here. Now you can see it's
got a little strung to it, so let's adjust the top as well. And with the second clip on the right side
here, we've got some nice vibration out of this one. I could get it a little tighter, and if I'm
going to do that either way, I still want to put these clips on this side here as well, just to
make sure it's nice and secure because the system is working really, really well, and I can't wait
to test a print. And the coolest part about this is they're really easy to adjust. So if I need to
adjust this side, all I have to do is hold the belt in place and slide it off, and then I can either
loosen it or tighten it as needed, and then slide it back on. So this gives me a pretty quick
change of tension on the belt if I need to adjust it up and down, because the longer you leave
tension on these belts, the more slack they'll start to gain from stretching slightly. They are
steel woven belts, so they shouldn't stretch too much, but they do have a little bit of give in
them. Now that we are done fixing this up, let's go ahead and fire up a print and see how it works.
There should be a lot less vibrational ringing in this printer now. Now you may have heard me say
in the past I've had some trouble with this machine, and to be honest, their original firmware
was kind of jank. So I did have it put away for quite a while during the move. We were busting
out all our printers, and I really wanted this one to be one of the ones I got going, and the
printer just kept ramming the bed into the head. The light on the detector was going off, it just
wasn't stopping it. So finally I switched it over to Marlin. I'll have a video up on that shortly,
on exactly how that did, as well as the file that I'm using to run this properly. But ever since
then, and a little adjustment to the e-steps, everything is flowing perfectly. I have not
once unleveled my bed or rammed it into the head. The sensor is fine, just the firmware that they
used to calibrate this machine was not functioning properly. Marlin, however, is amazing, and I'm
having really good luck with it. So if you'd like to know how to get Marlin on yours, stick around.
I'll have a video for that coming out shortly as well. We're going to speed through the printing
process, so we don't have to watch this whole thing, and I'll show you the finished product,
and that's going to be it for this video. So stick around for just another minute,
and we'll see how this comes out. And there we are. It looks great, actually. I am still dealing with
a little bit of stringing, as you might be able to see in here. The vibrational ringing is almost
completely gone, and I've dealt with that problem where the adhesion was a little too close to the
Z offset. So I'll show you how to do those two things as well. But I think this video was a
success. Definitely check out these clips. They're amazing, and they will help you get nice, tense
belts on your Core XY machine especially. That's going to be it for this video, guys. Don't forget
to subscribe, and we'll see you in the next one.