Asked a good friend of mine, Mark Francis over at Kennametal to give me some of his expert feedback on the Harvi 8X. Here is what he listed:
Insert Coating.
Insert Substrate.
Position of the cutting edges on the tool holder. (this includes the material of the body, heat treatment, coolant, flute shape, insert edge preparation)
Reduced or lack of harmonics of the cutter during machining operation
Shape of the chips
Metal removal rate second to none (higher feed/tooth, Higher Speed and higher cutter capacity)
8 cutting edges per insert
Maximized number of corner radius choices
Platform proposed with different options (diameters, dedicated front insert corner radius)
We have repeatedly cut cycle times in half and doubled tool life.
Cutters will pull less cutting load per cubic inch of material removed. This is beneficial to all aspects of the machining sequence.
2-inch diameter tools are effective when used with smaller equipment and spindle connection sizes, providing the means to bring productivity enhancements that could not previously be realized.
This video demonstrates the performance of the CannaMetal Harvey Ultra 8X cutter while machining 6AL-4V titanium. Using a DMU-50 5-axis machine, the presenter tests the tool's ability to handle deep cuts and high material removal rates, highlighting the cutter's extreme durability and the importance of matching tool capacity with machine horsepower and torque.
In this corner, we have a big old chunk of 60L4V titanium.
In the other corner, we have the CannaMetal Harvey Ultra 8X.
28 inserts. Boom! We're ready to cut some chips.
Before I get started, I just want to invite you, if you love this video at the end,
please hit the subscribe button, hit the like button, put your comments down below.
We're bringing the heat when it comes to CAD, CAM, CNC machining education.
So today, we're going to cut some chips.
So this is the Harvey Ultra 8X.
The 8X stands for 8 sides.
So basically, every insert actually has 8 cutting surfaces.
And this specific tool, which is a 2-inch diameter with a 2-inch length of cut,
this guy has 28 inserts, all right?
So we kind of treat it like it's a 4-flute.
But as the flutes go up, you see insert after insert after insert after insert, 7 stacked.
Boom, boom, boom.
I've been hearing crazy things about this tool, and I actually looked at the data,
and it is insane.
You basically can take this entire tool, drop down,
and slot full depth with this thing in titanium.
Big horsepower just pushing it through.
They say that the only limitation on this tool is the machine, not the cutter.
This thing is just going to go and go and go.
I will also say that this is a DMU-50.
It's a rigid 5-axis machine, and it's made for getting after it,
but it's also made for speed.
So we have 40 horsepower, but the torque is on a higher level.
Besides the tool, I actually have an HSK-63 holder.
So this isn't an extremely rigid holder.
So when choosing the type of tool and the diameter of the tool, the length of the tool,
I took all of that into account.
I'm on a machine with 40 horsepower, but the torque's on the higher end,
which is not really built for a tool like this.
You got machine tools with low-end horsepower, big power at lower RPMs,
and you have other machine tools with big power at higher RPMs like this guy.
But we're going to make it work, all right?
So you ready to cut some chips?
Let's do this.
All right, to start things out, we're actually going to do a radial cut of 150 thousandths,
and we're going to drop all the way to the bottom two inches deep, all right?
So we're two inches deep and 150 thousandths, and that's our starting point.
So right now we're about 40 to 45 percent on the load meter.
So I think we can actually kick it up a little bit.
So we're actually going to take a 0.3 diameter radial cut, so 300 thousandths,
and then we're still at full depth at two inches,
and that'll push us up just over 80 percent, which will be good for this machine.
So it shows you that this thing is over 300 thousandths,
and it's actually just eating titanium, but it's all about the machine.
It's all about the load.
So when you grab these big machines with a big horsepower on the low end,
you basically can just shove the cutter all the way into the material
and just eat that titanium all day, all night.
Oh, this thing is a beast.
Oh, pass after pass after pass.
Oh, this thing looks good.
It looks good.
Oh, man.
One thing that I want to say also, man, this thing is like cutting crazy, right?
But let me just say that this is a two inch diameter and it's two inches long.
They actually make these cutters up to three inch diameter and nine inches long.
So when you actually look at the application and you look at the tool
with the right horsepower and the right application,
I mean, you can just go beast mode.
And then your only problem is what to do with all of the chips, right?
Make sure that conveyor is working good.
Oh, this thing is awesome.
Check out this cutter.
Check out the cutter.
Let's check it out.
Oh, it looks so good.
It looks so good.
Boom.
So we have a little bit of discoloration on the insert,
but the inserts look absolutely perfect.
Oh, you see all these chips down here?
This is awesome.
That's money, baby.
Right there.
Oh, man.
All right.
So that concludes our test of the Canon Metal Harvey Ultra 8X.
All right.
So a reminder before I go, if you love what we're doing,
please subscribe to our channel.
If you love this video, hit the like button,
put your comments down below and I will see you on the next vlog.