CNC Machining this Aluminum Medical Part made my CNC Shop over a Million Dollars. This video explains how we CNC Machined these parts over the years and the different Fixturing we used on our Haas CNC Mills.
The speaker explains how evolving the fixturing and production process for a single CNC part led to a million dollars in revenue. By transitioning from manual, single-part setups to high-volume automated tombstones on a horizontal mill, the company drastically increased throughput and reduced downtime.
I'm gonna explain to you how this part right here made our company a million dollars
Hey, what's up, everybody? This is Titan Titans of CNC and today I'm gonna talk about this cool part right here
All right, so we've been talking about fixturing
We've been talking about tooling and I thought about this part right here
It doesn't look like much
But the production of this part made our company a million dollars
All right, before I get started
I just want to invite you guys at the end of this video if you appreciate what we're doing
Please subscribe to our channel and hit the like button
And if you want to see us teaching on something in a future vlog
Please put it down in the comment section and you'll probably see it come up in the future
All right, so check this out cool part, right, but it's nothing too crazy
It's got some tight tolerances and stuff but there was an
Evolution of this part right when we first started making this part. We're making like 25 50 pieces
Per run right and I really didn't understand the future of the production of this part
I didn't understand where this part was going. I didn't understand the
Assembly and what it was doing in the world, right? I'm not gonna speak to all that right now
But let's just say it exploded
All right
So let me just talk about our process with this part and how we went from making one part to running 20 parts with 10 coming
Off complete to actually having 24 parts coming off complete every time the tombstone rotated
So first, let me explain to you more than 10 years ago
What our process was in actually manufacturing this part when we only had quantities of 25 50 75 and maybe a hundred
Right, we actually went to soft jaws and then we created a little fixture that basically rotated on a fourth axis
And finish all the intricate work around. Alright, so on the first operation
We basically cut the top cut down here
We profiled the part brought everything in and then we basically took the part and we flipped it down into special soft jaws
These are the soft jaws right here. So they lock in place and you see the intricate cuts
These are very old soft jaws. This was these jaws are from when we first started making this part
But you can see it fits down just perfectly
like
Down inside and then I got another jaw that basically locks in
Keeping it solid where we machine the rest of the part
One of the things that you'll see is this wall right here and this wall is very important because there's a lot of features
Going around the part
That are related to this wall right here
So in the next operation in the soft jaws, we machine the part so that everything is done
except for
all of the side
Intricate work. All right. So now you have the entire part
Finished except all the intricate holes going around the outside
All right, so what we did was we actually created this fixture for a fourth axis
So it's sat in here like this and then it basically dropped down
perfectly and you see surface to surface everything is tight and
Then right here. You can see a ledge right here and that ledge
Catches this guy right here as this guy drops down
You lock it then it's got a dowel pin here that's it slides against and
Then two more dowel pins over here that ensures that everything is locked
Perfectly. All right, and then basically we have to put four screws in each of these holes and lock it down
Running just one part, right?
Locked in and then the fixture locked into a fourth axis
Indexer basically allowed us to mill the hole boom. Boom do these holes on the outside?
flip down 180
Deburr the bottom finish these guys
See this guy right here flip this way cut across
Put that hole in
flip down
Pop this hole in and then go down and pop this hole in which deburs that hole at the same time and
Then allowed us to put a saw cut across it and basically do all the deburring
So that the part came out perfectly right now. This was cool
It was it was artistic and it's how we started but what happened was
Our orders went from 50 and 75 and a hundred up to 500 per month and
More so what we did was we figured out that we needed to actually just rotate the part in two
Operations so in looking at the different holes and how they were called out. We created a fourth axis
Tombstone and we basically use my device to lock in the raw material
okay, we have five parts across this tombstone and then
Basically, we machined it. Boom. Boom. Boom, and then we rotated it did the side holes
Rotated it did the other side holes and we did three sides at one time
And then we took it. So then you have five parts and
Then at 180 you have five more parts
So every time the door opens you have ten raw blocks of material going into the tombstone
All right during the same operation though at 90 and 270
We actually have the part
left and basically we cut the second up and
rotate and rotate also
Which allows us to actually machine all six sides of the part and the
Sawcut all of it in one long operation
Which enables us to keep the machine running for a long period of time?
Machine stops door opens we take out ten done parts
We put we flip the other ten back into the second opposition
And we take ten blocks that have been previously prepared and put it into the fixture
Lock everything down close the doors and go. All right now
In machining you learn lessons, right? So one thing there was error
That process was better than this right because you had one and now we actually have
20 pieces and ten coming out right so productivity went up
But what happened was we had a machine fault and
The spindle head actually dropped into our fixture
Damaging it in a way that we couldn't keep the
Tolerances in the part and therefore we have to make a decision. Do we make another fourth axis fixture?
Or do we take a different approach at that time? I looked at our downtime. I looked at what could happen in the machine
I understood that I had an easy
400 a
Horizontal mill and I decided that there was a better way to actually make this part
So what we did was we created these plates and we put the material under these plates
Just like we did on the fourth axis, right?
But now the plates are hooked to a tombstone that rotates this way on a axis
That rotates this way right so you're like boom boom
Boom, the horizontal has two tombstones also
So while all the parts are being machined on one tombstone, you're actually loading the second tombstone
All right, so that's all we did
We took the same type of application as far as machining goes from our fourth axis
We put it onto a tombstone and then we loaded parts when the other parts were being machined
Close the door hit the button and walked away from the machine and then every time we had a rotation of the tombstone
We actually had 24 parts coming off the machine
Complete while the machine was running unattended non-stop
all right, and uh
Or I made us a million dollars, right?
So why am I explaining all this because you're mine and you're fixturing because it's important to understand that
Machining is an art and your ability to fixture and out think the
Competition and other machinists is what makes you money, right?
When you look at the Titans of CNC Academy
You'll see the art of fixturing where we actually teach you how to fix your parts and we do it for free because we care
About this industry we care about you and we're bringing the heat when it comes to CNC curriculum
All right, so go on the Academy check out our art of fixturing series. Look at the blueprints. You can download them for free
Practice on it and you'll learn how to make these same fixture plates and go beyond based on your creativity and your mind
Oh, that's the beautiful thing about CNC machining right there
All right
So again hit the subscribe button hit the like button if you love what we're doing and I will see you on the next vlog
boom