Whittle a 1x1 Dove | Step-By-Step Beginner Tutorial

Arts and Design
68 followers
#art #decorate #design #diydecoration #sculpture #ceramic
This video is a tutorial on carving a dove out of a 1x1-inch piece of wood. Hope you enjoy!
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial demonstrates how to carve a detailed dove from a small piece of wood (1x1x2 inches) using a carving knife. The process moves from rough blocking and geometric layout to organic rounding and fine detailing of the head, beak, and tail to achieve a realistic bird silhouette.
Today we're carving a dove out of a one by one inch piece of wood.
And for this project you're going to need a knife, a pencil and a piece of wood that's
one times one times two inches and three quarters or two and a half times two and a half times seven
centimeters. We're going to start this project by taking off two of these sharp edges and we
can make these curved. And that can be done with rough cuts and push cuts. That's good.
And then the other side. Next we're going to divide this distance in three and then this
in half. And from this point to this point we're going to make a straight line. And now we can
remove this corner. A slight sweeping cut motion can help quite a bit with this at first. Then we
can divide this in five parts and this in three. And we can make this rectangular shape starting
from the second line from the top and then connecting down here. And we can remove this
bit. And this push cut version of the sweeping cut works very well at first. And then to get
into this sharp corner we can use some stop cuts. This corner right here is at the level where the
tips of the wings are going to be. You can extend this as a horizontal line to the other side.
But then we're going just a little bit higher for the inside corner where the stomach meets
this piece of wood that the bird is sitting on. And for this we're just making a stop cut. And again
this goes about one third of the way in. So to the level of this corner. This distance doesn't
matter that much right now. We can place it at about a quarter of this distance. You can just
press the blade into the wood and then cut from here. We can also remove about half of this.
So something like that. That's good. Next we're going to slim down where the head is going to be.
So that's right here. So about half of this distance from here on the top to this corner is
where we're going to start making sweeping cuts. And we're going to leave about one third of this
width. Then we can divide this edge in three. And right here is where the beak is going to be.
So that means that underneath this we can make this S shape. An inside curve and an outside curve.
So we can make some sweeping cuts. This variation that I'm using is what I call
a reverse push cut. So I'm supporting the fingers right here and the thumb right here. And then just
twisting this wrist. And this works very well in these kinds of end areas. But you can alternatively
also hold the block like this and use a push cut version of the sweeping cut. But we're going quite
a bit in deeper than the level of this chest. So that means that we need to cut from both sides.
This doesn't have to be clean yet. Something like this is good enough for now. And then we can make
this chest rounder. And there we have that little S shape. Then we can remove this corner. The beak
is already starting to show. And we can extend this curve somewhere over here to the level of
this edge. And then make it a tilted line like that. And this can be done on both sides. We're
going to create a distinction between the body and the block of wood. And we can use V cuts.
So cutting from both sides like this. Then the same thing over here on the other side.
And these V cuts can be made all the way up to this level. Next we can make a distinction between
the tail and the wings. And at first it's going to be something like this. We're again making
V cuts. But I think this is slightly too high up. But it doesn't matter when we still have this
huge round shape. We can extend this to the side a little bit. And then this is defining the underside
of the wing a little bit. It doesn't make sense to do too much of this yet. Because we're going to
have to do quite a lot of rounding. But this already works quite well for guiding the general
shape. Because this is what we're looking for. This almost like a water droplet shape with
if we're excluding the head. So getting a lot wider over here. We can make the back a little
bit more curved by making the wings curve down here just slightly. And then giving the back of
the neck a little bit of curvature. And then making sure that this part also curves smoothly
into that. Now at this point we can start taking away these sharp edges. And we're rounding the
entire figure with these push cuts. So we already have most of the important features. Which can
really help with guiding this rounding. You might also need to take some mass away from the sides.
So for example in my case I still need to take quite a bit of this mass away. Because right now
the shape from the front is kind of more like a chicken or something. A little bit too bottom heavy.
So that means a few cuts like this to make it a little bit more top heavy. And these kinds of
adjustments mean that you might need to remake some of the features. Like right now about half of
this inside corner of the wing disappeared. But it's easy to make again. The same way we made it
initially. We need to use these same push cuts for rounding the head too. And at this point I think
we're ready to get into some of the details of the head. And after that there's going to be a lot of
refinement. So we can start slimming down the beak by making these sweeping cuts. And just regular
push cuts. The shape we're looking for is a little bit downturned. And down here we're looking for a
pretty smooth transition to the neck. I think that's good enough for now. I don't want to make
it too thin before the rest of the features are almost finished. Now this is still a pretty basic
shape. And I think it looks kind of like a dove. But it also looks kind of like just a generic bird.
And what we can do to fix that is to make the head a little bit more upright.
So that means changing the curvature of the neck just slightly. And then we also need to
slim down the head itself. Because this angle is pretty good already. We're looking for this same
kind of tapering over here. So we want to create that long tapering neck that leads to a somewhat
small head. Now at this point it's good to look at some reference images to get a better
understanding of the shapes we're looking for. While making these adjustments some of the most
important features to get right are the head and the neck. But also this entire curvature right here
and also on the front. And even the smallest differences can make a pretty big difference.
So I think it's definitely worthwhile to take your time with this. And making all of these
adjustments might have effects on other features we've already made. And the initial proportions
were made so that there's a little bit of extra. So for example with this tail. At least in my
case it's a little bit too long. So I'm going to make it a bit shorter. So at this point it's best
to make the final steps over here and then we can still refine these more fragile parts. So what I'm
going to do here is I'm going to make the shape of this base a little bit more organic. So I'm making
it a little bit more cylindrical at first and also a bit less symmetrical. And onto something
like this I can now add a few v-cuts. These are like cracks in the wood. Then we can remove this
bit so that the tail is actually thin and not this kind of a block. So that takes a few stop cuts.
And it might be a little bit difficult to get all of those chips off of this tight inside corner.
But using the tip of the blade like this can help with that. We can also make these corners
a little bit rounder. And then adding a small v-cut over here creates a gap between the feathers.
This is something that is often seen on the tails of doves. When it comes to the tail what really
helps is making these edges thinner than what the actual tail is in the middle. Because that way
we can get that illusion of thinness without needing to make this super fragile. Now for the
final detail we're going to make a curve like this on both sides of the head. And this is made
with sweeping cuts. So we're slimming down the top part of the head just a little bit and creating
this curved shape that brings out the cheeks a little bit. And after those sweeping cuts we can
make a few very small push cuts so that we can get rid of this sharp corner and make it rounder.
And now after that you can make the final adjustments on the head shape. For example in my
case the beak is still a little bit too long and too big overall. The forehead needs to go a little
bit more inward which will make the beak appear even longer. So that means removing more than what
seems necessary at this point. These top cuts work very well for slimming down the beak and also in
making a better distinction between the beak and the head. This little inside corner right here
is a very nice detail that I think really emphasizes the dove-like head shape and distinguishes it from
other similar birds like seagulls. Of course the beak makes a similar shape in many other birds
but it's the difference in thickness that matters. So it's this roundness of the forehead and the
cheek that really push out from this inside corner that makes the difference. Here I'm
just defining this upper front part of the wings with a few sweeping cuts.
