As part of this full review of the 11SIX24 Jelly Bean 2 lineup, I doubled my spin-durability test from 100 impacts to 200. The Jelly Bean 2 finished with more spin than it started with.
11SIX24 took the Tier 1 HexGrit surface from the Power 2, dropped it onto an entirely new full-foam EMA construction, and cut about $40 from the price. But despite sharing some of the same DNA, these paddles feel almost nothing alike.
In this review, I test all four Jelly Bean 2 shapes, compare them directly against Power 2, and put HexGrit through the most aggressive accelerated wear test I’ve run yet.
The bigger question: Was my original Tier 1 HexGrit result a one-off, or is this surface really that durable?
In This Review • All four Jelly Bean 2 shapes tested • New full-foam EMA construction • Jelly Bean 2 vs. Power 2 • KewCOR, spin, swing weight & feel data • 200-impact HexGrit durability test • Shape-by-shape recommendations & mods • UPA-A certification caveat
Chapters/Timestamps: 0:00 Premise & Disclosures 1:16 Construction & Build 2:05 Specs & Shapes 3:00 Performance Metrics & KEWCOR 4:14 Paddle Feel Map 5:04 Spin Durability 7:34 On Court Impressions 10:48 Paddle Mods 11:36 Standout Features 13:18 Who Is It For? 13:40 Who Is It Not For? 14:15 Shape Guide 14:48 Final Thoughts
AI Generated·May contain errors
Most paddles don't lose their spin slowly. They crash early. Most of the damage happens in the
first 50 impacts, and then it levels off. I said that on a recent episode of the Q-Cast right after
running the most aggressive version of my accelerated wear protocol I've ever attempted.
So, 200 cannon impacts instead of my usual 100. 70 miles per hour to the exact same spot,
measured in four stages on two paddles side by side. One of those was the Jelly Bean 2 that
I'll be reviewing in this video, and the other was a traditional raw carbon fiber paddle.
The 11624 is launching the Jelly Bean 2 in all four of its shapes. Pegasus, Vapor, Ultra,
and Hirachi X. It's a full foam construction with an entirely new recipe compared to the original
Jelly Bean, and it's also very different from their more recent Power 2 lineup. It uses the
same hex grit surface that I already rated Tier 1 for durability, and lastly, it comes in at a new
price point together with, as you're about to see, a genuinely different feel. So, here's the obvious
question. Does Tier 1 durability actually carry over to these new paddles at a lower price point
months after the original result, or was that Power 2 finding a one-off? Quick disclosure,
11624 sent all four Jelly Bean 2 shapes in for testing with no payment and no editorial input.
If you use my code JOHNQ, you'll get $10 off and I earn a commission that helps support this
channel. Quick note, just so I don't have to say the words Jelly Bean 2 100 times in this video,
I'm going to abbreviate it JB2 from here on out. So, here's what's inside the JB2. All four shapes
share the same Gen 4 thermoform build as the Power 2, but the core is a new full foam blend of EMA,
EVA, and expanding foam. EMA is the interesting part here, and as far as I can tell, this isn't
the first time it's shown up in a paddle core at all. And I'll get into how it affects the feel
and performance of the paddle in a minute because it's not a subtle difference compared to 11624's
previous options, including the original Jelly Bean lineup. The surface is hex grit, the same
grit-infused peel ply I already tested at Tier 1 durability on the Power 2. That result is a big
part of why this video exists, so we'll spend some real time on it. Certification is UPAA,
and it comes with a one-year warranty across all four shapes. All four paddles in this lineup
retail at $170 or $160 with code JOHNQ, about $40 under their Power 2 cousins across the board.
And I'll leave the exact numbers on the screen here, but the broad strokes are that the Pegasus
is the widebody and is also the most maneuverable shape in this lineup by a wide margin. The Vapor
and Ultra are both hybrids sitting in the middle of the pack, and the Haraji X is the elongated
built for reach, and it's also the shape with the lowest twist weight, which is a proxy for
side-to-side forgiveness. One pattern holds across every shape. Swing weight runs heavier than its
matching Power 2 counterpart, by 3-6 points depending on shape. Almost certainly that
relates to the EMA foam used in the JB2 being probably denser than the MPP foam in the Power 2.
EMA foam is softer and more flexible than what's typically used in full-foam paddles,
so EPP and MPP. And we'll come back to why that matters when we get to feel and performance.
Power and Pop both land in a different neighborhood than the Power 2 lineup,
where Power 2 is a genuine power category lineup across all four shapes. The JB2 clusters in the
upper end of all core. Q-core runs from 0.382 on the Ultra up to 0.392 on the Pegasus. A very
tight cluster, and every single shape lands 2-3 hundredths below its own Power 2 sibling.
And that's not a small gap. The difference in firepower is immediately noticeable when you
play with these two builds side-by-side. So if you've hit with the Power 2 and feel like you
didn't need all that extra firepower or didn't want it, this is where the $40 savings actually
buys you something you'd choose anyway. And spin tells a completely different story. Every shape
here lands in my Elite category. And three of the four, the Pegasus, the Vapor, and Haraji X,
actually outspend their own Power 2 siblings. But we're talking margin of error here. All of 11624's
paddles with hex grit produce Elite spin. So less firepower, but not one drop of spin given up to
get there. And that's a great combination for people looking for Elite, durable spin, but want a
more control-oriented paddle than where most of the Tier 1 spin paddles reside. And that's worth
sitting with for a second before we get into the part of the video that actually surprised me most.
Feel is where you'll find one of the biggest differences between the JB2 and the Power 2.
I plot every new paddle in my database on a feel map, so stiff to soft on one axis and hollow to
dense on the other. The Power 2 lives in quadrant B, stiff and hollow. And it lives there hard,
clustered tightly in the same corner across all four shapes. The JB2 is in quadrant C,
soft and dense. And it's not a small move across the chart. It's almost the entire diagonal.
These two lineups sit in nearly opposite corners of the same map. For reference, the 6.0 Coral Pro
lineup, a paddle a lot of you already know the feel of, sits much closer to the center of the
map than the JB2 does. So if you're expecting something Coral Pro adjacent, so softer than the
Power 2 but still fairly neutral, that's not quite what this is. The JB2 goes further into the soft
and dense territory than that. Now for one of the main reasons why I wanted to make this video.
A few weeks ago on the Qcast, I ran the most aggressive version of my accelerated wear
protocol I've ever attempted. 200 cannon impacts instead of the usual 100, all directed at the
exact same spot on the paddle at 70 miles per hour with measurements every 50 hits. I ran it
on the JB2 and compared it to a raw carbon fiber surface. The raw carbon fiber lost a quarter of
its spin in the first 50 impacts alone. By 200, it had lost a third of what it started with,
down 33% from new. But here's the part that surprised me most. Nearly two-thirds of that
entire loss happened in the first 50 hits. After that, the curve goes almost flat. So it's not a
slow fade, it's a cliff and then followed by a long gradual decline. Now let's look at the same
test on hexgrit. Brand new, the JB2 measured 2350 rpm off the cannon. After 50 impacts, 2443. It
actually went up. At 100, still up. At 150, still up. And after 200 impacts, the same number of hits that
caused the raw carbon fiber to lose a third of its spin, hexgrit was still at 2430 rpm. That's
actually 3.4% higher than where it started. Eddie's reaction on the show was pretty much the same as
mine. God, and look at this curve. That's not a curve. It's upside down. It's a plateau. Yeah, it's a flat plateau.
So it's not just that hexgrit resists wear better than raw carbon fiber. Based on this test, they
don't even appear to be in the same universe. I do have a theory on why. Hexgrit is a grid-infused
peel ply and my best guess is that the earliest impacts are chipping off the softer epoxy right
at the surface, exposing harder grit particles underneath that were already there, spinning the
ball slightly better than the epoxy on the top ever did. I ran a surface roughness reading on my own
hexgrit paddle with 72 games. The texture measurement did drop about 13% compared to when
it was new. But it's important to note that even after 13% texture loss, it's still noticeably
grittier than most other paddles are when they're new. So in real world play, the surface is changing.
It's just not changing in a way that costs you spin. And this wasn't a one-off. Including this
test, I've now run four separate hexgrit paddles through spin durability testing across two
different price tiers and two different construction generations. Every single one has landed comfortably
in Tier 1. So does Tier 1 durability carry over to a new price point? Yes. Confirmed. Not assumed.
On court, this whole lineup feels like the opposite of 11624's previous offering, the Power 2.
Instead of that stiff, hollow crack you get from the Power 2, contact is quiet. It's soft and dense
with no loud sound cue. Firepower is noticeably lower too, which tracks with the cue court numbers.
But the spin is elite across the board. And even though the firepower reads all court instead of
power, the extra spin helps shape the ball, which gives the whole lineup a more controlled overall
profile than the raw numbers alone would suggest. And something else worth noting, and this is
important, the JB2s aren't actually generating more spin than their Power 2 counterparts, but I
was seeing noticeably more dip on top spin shots. It can make you feel like you're actually getting
more spin, but that's not really what's happening. The ball is simply traveling a little bit slower,
which gives the spin more time to affect the trajectory of the ball and pull it down. I
noticed this most on drips, where I'm trying to get the ball down at the feet of the opponents
moving in toward the kitchen on my third shot. Other than spin, the JB2 excels at transition
zone resets and four-way dink exchanges at the kitchen. There's enough firepower to put some
serious juice on the ball with a very big swing, but that's not really the point of this paddle.
It's built for players who want more control than the vast majority of Gen 4 paddles on the market
right now, most of which sit squarely in the Power category. Now, I've spent the most time with the
so that's where I can go the deepest. And compared to 11.624's Power 2 lineup,
it feels almost like the opposite paddle. I keep coming back to that word,
opposite, because that's really where these last two launches sit relative to each other.
At the same time, the JB2 feels like a very natural successor to the original Jelly Bean lineup,
which was always the control-oriented counterpart to the Power line. And I'll dig deeper into that
comparison in the final section of this video. The EMA foam is the one thing that I'm still
adjusting to. It's soft and dense in a way that other paddles in the same feel family aren't.
The ball feels like it's being pocketed into the face, and then you expect it to spring back hot,
but instead it comes off at a more modest pace. That's a genuinely new sensation for me,
and I think some players will need time to adjust to it. It's taken me a few hours of play just to
stop expecting more pop out of the JB2. And maybe I still haven't fully dialed in EMA's
characteristics, but right now I'd give the sweet spot edge to the Power 2 line. To me,
off-center hits on the JB2 seem to die off just a little bit more. It's still a big sweet spot,
and I want to be clear about that. This could be partly a me issue, still calibrating to a new
material rather than a real shortcoming of the paddle. Across the other three shapes,
the same core identity holds. The differences mostly come down to shape rather than feel.
The Pegasus is the standout for the widest sweet spot and maneuverability.
That wide-body shape is naturally easier to get moving quickly at the kitchen. And surprisingly,
the elongated Hirachi X actually has a lower swing weight and better hand speed compared to
either of the hybrid shapes. The trade-off with the Hirachi X is less side-to-side forgiveness
and a narrower feeling sweet spot. But in return, you get more reach just like every other elongated
paddle. Then the Vapor and the Ultra sit right in the middle. The Vapor leans a little more towards
the Pegasus, and the Ultra leans more towards the Hirachi X. Even though these paddles already
have fairly high stock swing weights and twist weights, I still think they benefit from some
perimeter weighting, assuming you can tolerate the added swing weight. The Pegasus is the
exception. I think you can play it completely stock just fine. Its twist weight is already
above 7, and it's naturally very stable. For the Vapor and the Ultra, just 3 grams on each side
can bring the twist weight up to around 7 or higher. I'd place that weight fairly low but
still at the widest part of the paddle before it starts tapering down into the neck. And that
gives you a stability boost while minimizing the increase to swing weight. And for the Hirachi X,
I'd actually go up a little heavier. Its stock swing weight is surprisingly lower than both the
Vapor and the Ultra, so you have more room to add weight. So I'd go with around 6 grams on each side
without making it too unwieldy. So back to the question that I started with. Does tier one
durability actually carry over to a new price point, a new paddle, months after the original?
Yes. Confirmed on the Canon, confirmed by an independent surface roughness reading,
and now confirmed across four separate hex grip paddles, not just one. The second thing I keep
coming back to is the feel map. This isn't a minor divergence from the Power 2 formula. It's almost
exactly the opposite corner of the chart, using the same shapes from the same brand at the same
time. And I don't think I've ever seen one company field two lineups this far apart in feel. The
Jelly Bean 2 is 11624's second paddle launch of 2026 following the Power 2. Both are successors
to the original Jelly Bean and Power lineups, which had a similar relationship. The Jelly Bean
was the more control-oriented counterpart to the Power. But these aren't just updated versions with
new names. Both lineups make real measurable improvements over the originals. You're getting
better spin that's dramatically more durable, plus Gen 4 construction that improves overall
performance and expands the sweet spot. So essentially 11624 has given you more firepower
and offensive capability without really sacrificing anything in terms of control. If anything,
the larger sweet spot and more spin actually give you more control to work with. And the surface
durability is several times better on top of that. And the last thing I want to cover is the EMA foam
itself. It's a genuinely new material in this sport, and it comes with a real adjustment period.
I'm still in mine. I'd rather tell you that honestly than pretend like I've already got
it all figured out. That being said, I am adjusting to it, and I do enjoy playing with the JB2s even
as someone who typically prefers power paddles in a different feel profile. Who is this for? Players
who want elite, tier one, durable spin without paying flagship price. Players who want more
control than the power category paddles that dominate the market right now. And players who
are curious about what an entirely new foam feels like and are willing to spend a little bit of time
adjusting to it. Who is it not for? It's not for players chasing maximum firepower. The Power 2
still wins that fight in every shape and pretty clearly. It's also not for players needing a
paddle with USAP certification. This is UPAA only certified. If you play sanctioned tournaments and
you're not sure, check with the tournament coordinator before purchasing. And lastly,
it's not for players who want the largest possible sweet spot this brand has to offer. Right now,
I'd still give that edge to the Power 2, although that's based on my own admittedly subjective
experience. Sweet spot is really tricky to quantify because part of what we perceive comes
down to the paddle's vibration modes. And those can change depending on where you grip the handle.
And different players can be more or less sensitive to different vibration frequencies. So,
there's inevitably some subjectivity involved. In terms of the shape options, if you want the
widest sweet spot and the easiest paddle to swing, the Pegasus is my pick. If you prefer a hybrid
shape, the Vapor is still a solid choice. But for most people, I think the Ultra is going to be the
best option. It's the most well-rounded of the four. And if you've been priced out of the Ultra
shape until now, this is your way in. And finally, if you want maximum reach without giving up too
much hand speed, then go with the Huarache X. Two years ago, the original Jelly Bean and the
original Powerline launched side by side. And the Jelly Bean did one job and it did it well.
It gave you the Powerline's DNA without its price or full firepower. The Jelly Bean 2 keeps that
same roll but it's not standing still to do it. Elite spin with tier one durability. A completely
different feel. Gen 4 architecture the original never had. Same roll in the lineup but a genuinely
better paddle doing it. The durability result alone would have been worth the video. Getting
it on a paddle this different at this price point is the part that I didn't see coming.
Appreciate you watching and I'll catch you in the next one.