The Horus Tremor3 Reticle Explained with Former USCG Precision Marksmanship Instructor Billy Leahy

Tactical Military Gear & Gadgets
4 followers
In this video, Billy Leahy takes a deeper dive into the Tremor3 reticle for long-range shooting.
#TACTICALHYVE #PRS #LONGRANGESHOOTING
AI Generated·May contain errors
What's up guys, Bill with Tactical Hive.
This video is going to be just a short video on that Trimmer 3.
Like I said in the last video I made, I used the Trimmer 3 and it was a lot to kind of
break down whenever we're doing a bunch of different reticles just because there's so
much in this reticle.
So I was going to do a little video on just kind of breaking that reticle down.
I know a lot of guys that use it, I use it, and I've seen a lot of shooters come through
classes that have that reticle in there.
So again, there is training out there for this from the guy who made it.
He loves doing the training.
This is just going to be a short little intro into it here.
So I have kind of a breakdown of the Trimmer 3 reticle here.
Now as we talked about before, there's going to be looking at the horizontal steady line
going down.
That's what we're really going to focus on right now in these wind dots.
So these wind dots, and what I said with my gun was it's a .308, so the value of my wind
dots equal four miles an hour per dot.
So it makes it a little bit easy if you're doing holdovers on your target to get in here,
get on target, and then get quick wind on the target.
And also you can bracket these targets and bracket wind.
Not everybody can call wind down to the mile per hour.
So it's nice to know your bracket and know how much wind's actually on the target.
So here's a little example of that.
If we're looking, we'll just start with this small little target here, and we'll start
with the four mil line.
Now if my gun's a four mile per hour gun, and I put this four mile an hour dot center
on my target, and my hold over the target is four mils, it's going to look something
like this.
So this would be an example of a target at about 600 yards with a four mile an hour of
wind, left to right wind.
Notice how my reticle's on the left side of the target because we always hold into wind,
four miles per hour.
Easy example.
Now let's say we don't know if the wind is actually four miles per hour, right?
Now if I come over here, I know it's four, but maybe it's gusting.
So force sustain, gusting.
So if the wind picks up a little bit, you just kind of drag that dot over here.
Now if we're in between those dots, we know that's a six mile an hour wind.
If we want to go a little bit farther, that'd be an eight.
Four, eight, 12.
And then 16 mile an hour for me would be that big circle.
And that's as easy as that to get wind on target using this reticle.
So that's kind of an example of that.
And where it really helps is whenever you're on just a little bit bigger of a target, we
come over here.
Now let's see this bigger target.
If we're at 600 and that's our target size, even right here, this is going to be great
because I have four and eight mile an hour wind on the target.
That means I only have to call wind within four miles an hour to be able to get a good
hit on this target.
So if it's four mile an hour, let's say it may be six and it's gusting to 10.
Put that eight right in the center.
Now we have six and 10 on the target still to get a hit.
Does that make sense?
Another thing we can do with this reticle is really refine the mills.
Now let's use this target for an example here.
I'm going to line up and I'm going to mill or measure the width of this target.
Now if I put this side on a shoulder, kind of break in that stadia line, I'm going to
count 0.1, 0.2, 0.3, and it's not quite 0.4.
So I make all this, the target mills at 0.38 wide.
So the refined milling reticle works great.
And if you have bigger targets, you just come down here and let's say, let's use this one
for example.
We got a one mil width of the target, but now we want to get down into the minutia and
see exactly what that width is.
So one mil, 0.1, 0.2, almost 0.3, I'd say about a 1.29 on our mill for that target.
Also at the top of the vertical stadia line up here, you have that same mill with the
refinements in it down to 0.1.
So start at the one mil line, put that on the bottom of your target, and then just count
up.
You have your 0.2 here, 0.5, 0.6, 0.7, right at about 0.8 mils tall for this target.
Great reticle for that.
And then if you don't want to use the wind dots and you want to do wind calculations,
guess what?
These are all point subtended all the way out, and 0.2 mils going out for windage.
So if we're at four mils, you don't like the wind dots or you haven't learned what your
wind dots are, you can still do a wind calculation.
You got 0.2, 0.4, 0.6, 0.8, one mil, all the way up, three mils.
Once you hit the five mil line, you got four mils, six mil line, you got four mils, and
kind of all the way down.
Okay, so that was a little breakdown on the Horace Trimmer 3 reticle.
Really going over the wind dots and how to mill using this reticle.
In the last video, we kind of went over what everything meant on the reticle, so check
that out.
And then also, if you like this video, leave a comment, like, maybe subscribe, and then
we'll see you on the range.
