MG51: When the Swiss Make an MG42

Uniform & Arms
3 followers
Aug 20, 2026
When Switzerland decided to adopt a modern universal machine gun toe replace both the MG11 Maxim and the LMG25, both SIG and Waffenfabrik Bern used the German MG42 as a starting point. W+F Bern was the eventual winning of the trials with the MG51. This is basically a Swiss out-Germaning of the Germans. The stamped receiver was replaced by a milled one, the barrel made heavier for more sustained fire, and an effective anti-bounce system added to prevent the out-of-battery discharges that were a problem with the MG42. A number of other minor improvements were made as well.
AI Generated·May contain errors
Hey guys, thanks for tuning in to another video on ForgottenWeapons.com.
I'm Ian McCollum, and this is a Swiss MG 51.
If you ever wondered what would happen if the Swiss took a German cheap-to-manufacture
stamped MG 42 and made it themselves, what would it be?
It would be this, where they replaced all the stamped parts with milled parts.
These are fantastic guns. So, starting in 1942, the Swiss began looking for a replacement
for the two guns that they currently had in military service.
They had the LMG 25, and they had the MG 11.
The MG 11 was a Maxim heavy machine gun, water-cooled.
The LMG 25, as the name implies, was a light machine gun, on a bipod, also had a tripod mount.
But ... essentially they saw what the Germans were doing with the MG 34,
... well, this was the beginning of the concept of the universal or general-purpose machine gun,
where you have one gun that can be fitted onto a heavy mount, like this,
and used in a sustained fire, long-range, accurate role.
Or it can be taken off the mount, deployed on a bipod by a two-man team,
and used as essentially a mobile light machine gun. The Swiss wanted to copy that.
But it would take them about nine years to come up with a final design.
So the state arsenal, Waffenfabrik Bern, was involved in this.
The SIG company was involved in this, and Hispano-Suiza also actually contributed
designs for the competition to design the new machine gun.
Now Hispano-Suiza introduced basically scale-down copies of some of their existing cannons,
automatic cannons, the HS-804 and HS-830. We'll cover those in separate videos another day.
Both SIG and WF-Bern decided to start with the MG 42 and modify it, adapt it,
change the design in various ways. So they both started at the same place,
but then they went in different directions.
In fact, actually at one point the Swiss War Material Authority actually converted a stock MG 42
to the Swiss GP.11 7.5x55mm cartridge, and seriously considered, after the end of the war,
seriously considered purchasing MG 42s from Czechoslovakia and just converting them straight
up to 7.5. But they didn't end up doing that. They ended up adopting a gun from Waffenfabrik Bern.
Now over the course of the development of this, you know, there was a MG 44, a 46,
the 48 is the one that was finally derived, you know, updated a little bit, improved,
became adopted as the MG 51 in 1951. But in the course of this development they experimented with
roller-delayed guns, roller-locked guns, and flapper-locked guns. Now of course the original
MG 42 is a roller-locked gun, and the World War Two iteration of the MG 42 is a somewhat flawed
gun. It suffers from ... potential out-of-battery discharges from bolt bounce, and it wouldn't be
until the very end of the war that the Germans develop a good system to modify the gun to
prevent this. And that's a key component in the MG 3 production after the war. The MG 3s
incorporate a number of modifications to improve the safety and the reliability of the MG 42.
The Swiss, working on this starting during the war, didn't have access to that. So they were
looking at ways to solve some of those problems on their own. And ultimately what they end up
adopting here is a flapper-locked derivation of the MG 42. Frankly, I think that's a pretty good
way to go between those three options. The roller-delayed guns would be a bit simpler,
but would be very high rate-of-fire guns. In German experimentation, the roller-delayed
version was the MG 45, and it was up something like 1,600-1,800 rounds a minute, which is
way too high. In fact, the Swiss specified that they wanted a 1,000 round per minute rate of fire,
which is high but not excessive. So having a fully locked gun is definitely the better way to do it.
And then the flapper-locking system offers a number of advantages over roller-locking. It's
a little more expensive. Rollers are very economical and easy to produce at a high quality,
but the roller systems have a tendency, as they start to wear, they start to change headspace,
where a flapper-locked gun is more resilient in terms of that sort of headspace and long-term
wear. And if the Swiss wanted anything, it was a long-term, durable, utterly durable gun.
So let's go ahead and take this apart, and let's take a look at how they did this,
and what the differences are between the Swiss MG 51 and the German MG 42.
All right, a little bit about operation of the tripod. We have our elevation controls right here.
This is an elevation lock, so I push that forward and it will unlock the gun and allow me to pivot
it up and down. It's just a friction lock, so I pull that back and it'll lock in place.
Over on this side we have our elevation adjustment knob, right there. And then on top
we have the traverse lock. So if I pull that in, I can pivot the gun side to side. These are my
traverse stops, and these are really funky. This is a little different than what I've ever seen
around before. So I ... can lock the traverse in position. Then I have these dials right here,
and there's a little peg coming off the side of the top of the mount. If I pull this out,
I can then rotate it around. I believe this is a number of mils of adjustment that I want to have
to this side of the current aiming point. So let's go with 20. I lock it in place, and now there's a
hole going that direction inside this cylinder that allows this peg to travel just far enough
inside that cylinder to give me 20 mils of adjustment. Pull that out. If I want a lot less,
I can go to 5 and have just a little bit of movement. I can then do the same thing over
on the other side. So if I set these both to 25, I have that much windage adjustment
built in. And then if I want to change my sector of fire, I can unlock the whole thing, pivot the
gun to a different position, lock it, and I've got that limited windage again. And if I don't want
to use this at all, the best thing to do is set these to zero to lock them in place. And then you
just unlock the windage lock, and the gun can move freely. We of course have an optics rail on the
tripod mount, and a 2.3x power magnification scope with this. So, so Swiss here. This elevation
BDC cam is actually controlled by adjusting, rotating the eyepiece here. So you can see this
arrow is pointing at a range, and what's happening is I am pulling this sleeve back or forward,
which moves this pin in this curved track that is curved specifically to match the ballistic drop
of the 7.5 cartridge. So as this goes down, I'm very slightly changing the angle of the scope,
and that's how you get from a point-blank zero out to, crank it all the way around,
a 2,000 meter BDC cam built into the scope. And of course it goes without saying that there's
also a bubble level on the back so that you can make sure the gun is set up level.
All right, we are going to go ahead and disassemble this on the tripod because that
actually makes it a lot easier to hold in place. We'll take a quick start with the markings on the
top cover. We have Waffenfabrik Bern and the Swiss crest, and the serial number. That's it,
pretty basic markings on the gun. And actually at some point in Swiss service they put a sticker
on this to remind you to wear ear protection when you're shooting it, which hopefully doesn't need
much reminding. The basic function of the gun is exactly the same as the MG42. By the way,
this weighs in at 35 pounds for the gun and another 22 pounds for the tripod. So that's
16 kilos for the gun and another 10 kilos for the mount. The charging handle on the 51 has
this cam lug on it, so you get a little bit of extra leverage to overcome the initial unlocking
of the bolt. That loud click you hear is the release of the accelerator cam. That's something
that the original MG42 doesn't have, which we'll take a look at in a moment. Pull that back, it
locks the bolt open, and then this is spring-loaded so that it automatically snaps back into place.
It's a non-reciprocating charging handle, and that automatic return is a nice added feature
that the MG42 also doesn't have. The top cover opens with, just push that in, spring-loaded so
it stays in the upward position. One other really cool feature about this that the MG42 doesn't have
is that the cam track in the top cover here is curved and then recurved. So the benefit of this
is it means you can actually close the top cover whether the bolt is open or closed. In the 42 you
have a curve here and then a straight track, and so this track does not line up with the roller cam
on the bolt unless it's in, I believe, it's the open position. Now the way they solved this on a
was to actually put a spring inside the roller bearing here so that it could compress downward
if you were trying to close the top cover in the wrong position. What the Swiss did instead is
reshape the cam track so that it lines up with the roller cam in both the rearward and the forward
positions. So it'll close there, and it'll also close right there. To remove the barrel we have
the same basic mechanism as the 42. We lock the bolt open and then push forward on this lug.
That cams the barrel out of the action, and we can pull it out. This barrel is ludicrously heavy.
These were intended to fire, like, in basic proof testing they dumped 800 round belts through these
things. Stupidly heavy. This is a very Swiss sort of version, you know, take on the MG42.
Now for the rest of disassembly, I'm going to go ahead and close the bolt, and then I have to open
the top cover. This lug on the top cover actually prevents you from taking off the buttstock.
Once that's up, there's a catch under here. I can pull that back and let out the buttstock. There's
that locking catch. This is one of the later pattern examples that has a rubber, it's like a
Sturmgewehr 57 style of buttstock on it. Early ones had wooden buttstocks. Then I can pull out
the recoil spring, and then I can pull out the bolt. Alright, now looking more closely at the
bolt assembly here, we have a bolt head. We can take this apart a bit farther by punching out
this pin. The pin is the roller cam at the back. There we go, that comes out. And then
that is my plunger ejector. So when this is in place, it's the ejector right there in the front
of the bolt face. And then under it is the firing pin. With those two out, I can rotate the bolt head
and take it out. So there are our two locking flaps. Now there is, to disassemble this further,
what you do is pull the extractor spring back here. There's a tool that allows you to pull it
back but not have the extractor fly out of the gun, and then you can lift the locking flaps out.
But I think you get the idea here. When the bolt is locked, these lock into matching recesses in
the barrel. So there they are on one side, and there they are on the other. And they go together
just like that. So unlocked, they go in, they spread apart, and that locks the bolt in place.
They're moving like this at high speed, and when they close, the bolt carrier, the bolt is going
to hit the breech face, the bolt carrier is going to hit this. And just because there's a little bit
of elasticity in the metal, this tends to bounce backwards and pull the bolt back. And without the
right locking mechanism, that can cause the gun to come partially out of battery when it's actually
firing. And this was a significant issue on roller-locked guns because the roller lock pretty
quickly, like immediately, turns into roller-delayed and opens a little too easily. Now, locking flaps
give you a little bit more leeway where this can travel just a tiny bit, but remain fully locked.
More importantly, the Swiss added this lever on the bottom of the gun, and this is an inertial,
basically a bolt-bounce lock. So when this goes forward, the bolt's going to hit and stop, and
this lug, this moving piece right here, is going to also bounce forward. It pushes this rotating
cam forward, and that locks the bolt in position solidly. So that little cam there is pivoting up
into this cutout in the bolt, and holds it securely in position. So that's how the Swiss eliminated
bolt-bounce. This is more resilient against change in headspace with the flaps. So a series of really
good, I think, design changes. At the same time, the Swiss also changed the manufacturing methods
for the gun. The back half of the receiver is all milled from a block. This is kind of crazy.
That's part of why this is heavier than a .42. We have the mid section up here that you can see has
been cast, and then welded onto the milled rear section. And then we do have this front piece of
just barrel jacket that I guess they conceded, grudgingly probably, to make out of stamped metal.
But it's pretty darn heavy gauge stuff. So they stamped or folded this, and then welded it onto
the rest of the receiver as well. We can go ahead and also actually take off a couple of the other
elements here. So we have the muzzle booster with its internal, or the muzzle flash hider with its
internal booster. This helps generate additional back pressure to push the bolt backward. We can
actually take off the bipod. OK, that's extremely tight, but you can see this unclamps, and then
the bipod can come off the gun. If you're using it in a fortress, for example, and you don't need
the bipod, you can take it off. Alright, and we can also take off the pistol grip here. I just punched
that pin through, pin comes out, and this slides back and off. There's no semi-auto setting on here,
we just have a cross-bolt safety for fire and safe. Alright, and there is the MG 51 field-stripped.
If I didn't say clearly at the beginning, this was chambered for the Swiss GP11 7.5x55mm cartridge.
It did not use ... MG 11 belts. It did, because the MG 11 is a pull-out style of belt, this being
an MG 42 derived gun. It uses a push-through style belt, very similar to NATO belts. In fact,
there is an example of belt. These were non-disintegrating segments of belt. This is the
starter tab. The MG 51, of course, entered service in 1951. I wasn't able to find any really good
numbers on exactly how many were made, or what the production time frame was, but there were a
couple modifications or alternate versions that were also made. In 1970, 1981, and 1987, there
were different versions that were type classified for vehicular use. So in addition to being an
infantry gun, and of course this is Switzerland, so it's also being used as a fortification gun,
it was also mounted in vehicles as a coaxial or, you know, auxiliary weapon in armoured vehicles.
So you have those versions. The gun is still in service today in fortifications. In 2005
the Swiss adopted the LMG 05, which is the FN Minimi, and that replaced the MG 51 as sort of the
mobile, you know, squad level unit machine gun. So still in service, but the front line, like the
infantry that are attacking with machine guns, are going to be doing so with Minimis today in the
Swiss Army. So I'd like to give a big thanks to the fine anonymous Swiss gentleman who provided
this for me to film and show to you guys. And also a big thanks to Markus for helping me
work out everything on this gun to show you. Hopefully you enjoyed the video. Thanks for watching.
