Sikorsky’s S-97 Raider Points to a New Level of Performance For Future Helicopters – AIN
2 Video Views·Aug 20, 2026
The co-axial design of the S-97 Raider X2 technology demonstrator, combined with its innovative horizontal wing, tail plane and vertical rudder, is set to deliver new standards for speed and agility in a rotorcraft. At the Farnborough airshow, Sikorsky showed AIN where the key differences are and why they matter.
AI Generated·May contain errors
Video Summary
AI GeneratedAt the Farnborough Airshow 2026, Sikorsky showcases the S-97 Raider, a high-speed aircraft utilizing X-2 technology. By combining coaxial rigid rotors with a pusher prop, the aircraft overcomes traditional helicopter speed limits, achieving over 250 knots. The platform is designed for agility and versatility, with potential applications in defense, medical evacuation, and executive transport.
Hello from Farnborough Airshow 2026 where we're here today with Sikorsky to find out just how
platforms such as the S-97 Raider behind us are helping shape and inform the future of vertical
lift. Charlotte, this is a coaxial rigid rotor system that is part of our X-2 technology
and the S-97 Raider aircraft. Quite unlike a lot of the other conventional rotary wing
platforms here, why the decision to put the two sets of rotors on this mean machine?
Well, the real reason to do this is the agility, manoeuvrability and speed of the helicopter.
As we think about single main rotor aircraft, they are limited in forward speed,
they're also limited in agility and manoeuvrability. By moving to a coaxial rotor system
and making it a rigid rotor system, this gives us increased speed of the aircraft,
it increases the agility of the aircraft, rapid turns, acceleration, deceleration
and overall speed, survivability and lethality of the aircraft.
X-2 technology demonstrator, been around for a couple of years now?
Right, so the X-2 technology has been around for quite a few years now. This is actually the fourth
X-2 aircraft that we have built. We started with our X-2 demonstrator which achieved over 250 knots,
one of the fastest helicopters in the world and we've now built two Raider aircraft and
then we've also built a larger assault variant. Can we take a walk around it? By all means,
let's do. So we'll kind of start here at the front of the aircraft but as we've talked about
the coaxial main rotors really sets this aircraft apart from any other rotorcraft.
Obviously due to the high speeds of this aircraft we need retractable gears, two pilot station up
front and then in the back of the aircraft we have room for six passengers, six soldiers or
in an attack or reconnaissance configuration this provides internal weapons capability or
room for those. As you look down the back of the aircraft here down the tail boom you know you see
our propulsor there, you see the horizontal wing and then you also see the vertical rudder. Really
what that does is that's kind of the airplane aspect of this aircraft and you've got actually
a very fast and renewable small airplane. So we're combining these two technologies with the
coaxial rigid rotor high-speed helicopter with the thrust vector and the capability of a very
small and maneuverable airplane. What top speeds are we talking, what sort of cruise speeds are we
thinking? You're talking about speeds over 250 miles an hour which is unheard of for traditional
helicopters. So Bill we're here in the heart of the aircraft where all the magic happens
and I believe you are the man best placed to talk me through what exactly that is.
Okay well we'll talk you through it. Full disclosure I can't take you flying because
you don't have your seat belt on, right? However this is an awesome machine and I have a collective
that controls the up-down of the aircraft and I have a prop beeper that controls the pusher prop
to put thrust on it. Now that pusher prop can either be engaged or disengaged for flight
and when it's disengaged this machine is insanely quiet but when it's disengaged you fly this
exactly like you fly any other helicopter. I push the nose over with in this case my sidearm
controller and pull the collective up and nose down accelerate away and then the opposite of
that to decelerate and come back and land and this aircraft has flown with the prop not even
installed to 160 knots the top speed of other helicopters that are quite good. When you install
the pusher prop this aircraft has flown to 210 knots in level flight and all I do is beep in
thrust from the pusher prop. Now it's a very maneuverable aircraft we can roll quickly left
and right and I wish we could just fly away from here and go show it to you rather than tell you
about it but my most favorite feature about this aircraft is when the shoulder harnesses tug back
on me because I've put negative thrust on the pusher prop so we can go from full speed do this
rapid deceleration by essentially think of that pusher prop as throwing out a big parachute. We
put negative thrust on it and you really feel the control harnesses pull on you and come into that
landing zone and that's awesome for when maybe somebody's going to shoot at me or there's people
in harm's way that are down there that I need to pick up and I want to minimize the amount of time
that I'm vulnerable and slow and you know but if I didn't do anything as I came in and I had all
that negative thrust well I'd start backing up but I don't want to kind of play around with the prop
and try and find what I need so I can push straight down on the prop switch and it takes it to a
neutral thrust condition and so it makes it really easy for the pilot. Obviously this isn't indicative
of what a certified variant would look like because as you say it's a flight test machine.
Are you expecting any other sort of significant changes to the layout here? So in reality I think
that this aircraft is demonstrating what an X-2 technology aircraft can do. X-2 technology is the
rigid main rotors with the pusher prop that mitigates retreating blade stalls so that we can
go much faster and the next aircraft or what we would do would be to design it to the specifications
of the customer. How many people do you want to take? Do you want to carry weapons? How far do you
want to go? Do you want to go 210 knots or like the other two X-2 aircraft we built that went 250 knots
and percolate all of those requirements down into a aircraft that is specific for the customer's
mission. How many hours have you got on her Bill? This is aircraft one we no longer fly this one and
I flew every flight of this aircraft and we have aircraft two in Florida between the two we have
about 200 flight hours. The other X-2 aircraft X-2 tech demonstrator that flew for about 20 hours
and we have the Defiant that we built for the JMR program for the U.S. Army and trying to remember
how many hours we flew on that around 50 hours I think. Congratulations fine addition to your
logbook there. We're looking at multiple different variants not only on the defense side of the house
but also on the commercial side of the house so when you think about current like medical evacuation
on the civilian side you know now you've got an aircraft and it can achieve over 250 knots
and you're really reducing that time to get a patient to a treatment facility.
If you want to kind of go to the the biz jet community or the executive transport
who wouldn't want to fly in a 250 knot helicopter rooftop to rooftop. Signing me up for one now I
mean maybe we'll run it past the editorial budget first but let's say I did want to harness that
capability for myself do we have a rough idea of timelines potential entry into service
certification? So this aircraft could enter service in a few years it's really we're obviously very
familiar having built four of these aircraft already so it's really defining what those
customer requirements are and then developing the aircraft the size of the aircraft the payload
capacity and then determining the the final speed that the customer would like to travel.
But it sounds like most of the elements are already sorted in the bag it's just that
particular missionization use for particular operators or customers. That is exactly true
we have all the homework done if you would we just need to go to the final exam. I wish you
every best with the final exam and look forward to seeing this in a in service soon with all its
fantastic capabilities that you've developed. Well thank you, I appreciate it.

