How To Build A SIMPLE Paludarium. Step By Step Easy DIY Guide

Mini World Craft
6 followers
AI Generated·May contain errors
In today's video, I'll be going over a super simple easy way to build a
polydarium that anybody can do. I wanted to make
it as user-friendly as possible so you can create your dream paradise.
Plus, I'm super excited to show you the animal that would be going in.
Some people call it the holy grail of lizards. Welcome back to Brad's Bioactive
Builds where I do step-by-step do-it-yourself
naturalistic reptile enclosures. This build is going to be an entry-level
polydarium for anyone wanting to create one for themselves.
So join me on this journey as I show you how. Let's get right into the video.
Alright, let's go. Seeing that I'll be using a used enclosure, I had to wipe off
any surface scum. A razor blade works great in this
situation. Remove the door so they wouldn't snap
off during the building process. Then did a real good wipe down with
rubbing alcohol. To divide land and water, I'll be using
which is a user-friendly putty epoxy. Took part A
and part B and mixed them together. I have a full video explaining this
process I'll post in the top right corner now.
But it is pretty simple. You just knead it like dough and mold it to wherever you
want. Dip my hands into some water so the epoxy
wouldn't stick to my gloves and started laying it down on the
outline I created to create the barrier. Smooth the bottom to the glass. Wiped
away any leftover water. Waited for this part to heat up and
harden before applying more on top. Once hardened, I applied more getting it
to my desired height. I did have to do this
in total three times. I did it in stages so it wouldn't fall over on itself
before hardening. Marked the height for the water level and
built it up for the final time. Making the barrier as watertight as
possible. But I will be adding a second coat over the top of this where I'll be
able to add all my detail and smooth it all out so water can't
seep through. Use a razor blade to remove any excess.
Then some rubbing alcohol to clean off the glass. Taped it off.
Ran a bead of silicone between the tape and the zoopoxy creating a watertight
seal. Smoothed it out with my finger and pulled
the tape while the silicone was still wet.
To add my XPS board I pulled some measurements cutting it about an inch
short. Cut three pieces to size. Measure the
height of the divider and place the XPS board in. Measuring to
that height. Drew out a template and cut it out.
Slid everything in for a test fit. Traced out my water filter
and cut out the XPS board about an inch over my trace.
Did one more test fit to make sure everything was going as planned.
Scratched up the back of the XPS board with a serrated steak knife
and applied dry lock to the back of the XPS board. I found silicone adheres
much better this way. Applied silicone all around the back of the XPS board
and then a generous amount in the middle. Press the sides into place first.
Added silicone to where the back panel was going to lay and then placed on my
back panel locking in my side panels. Wedged in
random materials keeping it in place. Carved out the background with a wire
brush and vacuumed up all the debris. Tapered
off the background where it meets the glass.
Hit it with a heat gun to tighten everything up. I did notch out a little
bit of room for this pump which I'll go over later in the video.
Now you could use dry lock for this application but I decided to use more
poly gem zupoxy mainly because I have an 8x4x6
polydarium that I'm working on so I have an abundant amount of this
supplied. To detail everything in I simply used a
dabbing it to make it look more naturalistic.
Applied spray foam between the barrier and the XPS board to fill in the gap.
Removed all the excess spray foam and applied zupoxy over the top.
At this time I also added my second coat of zupoxy over the water barrier
adding in all the detail. Once again removing any excess
on the glass. For the background I'll be using a cup of dry lock with black
acrylic paint. Mix it together for my base coat.
Working it into all the deep crevice so it creates a shadow when I go to dry
brush. For my second coat I used a dark brown
with a thicker dry brush method. For my top coat I used a very light
brown with barely any paint on the brush.
I really wish my camera would pick up the fine detail that this creates
but try it for yourself and you'll see. I do like to get the background base all
completed before adding my accent pieces. It makes it much easier to work this way.
Tacked in some cork bark with the hot glue gun. For the cords and hoses I'll be
using a half round cork bark tube. Did a test fit to make sure it wouldn't
touch the screen lid. And used some more putty epoxy to secure
it into place. Tacked in and secured more accent pieces.
As an extra barrier protection from water seepage
where I'm going to be putting the substrate I siliconed in between the
zupoxy and the glass. To escape the branches above the
substrate area I had to use three different pieces.
Nature does have a mind of its own so you can't really go wrong
on how they flow but I do find it more appealing to the eye when it looks like
one cohesive piece flowing in one direction. Broke up some
porcelain tile and removed any sharp edges. Applied hot
glue and stuck on my cork bark tubes for some
hides in the water portion. The slate tile will prevent the cork bark
from floating. Used more putty epoxy to secure it into
place. And waterlogged and also got rid of the
tannins by soaking it in water. Tacked in some planters and spray foamed
in a ledge. Wedging it in place preventing it from
moving. Use spray foam around the planters. So
far this is what the hardscape looks like.
Pretty much a mess until we start rolling with fine details.
Trimmed down the spray foam with a serrated steak knife but my go-to method
is just ripping it off with my hands. And covered everything in zupoxy to
prevent spillover or materials being thrown on the cork
bark. I just simply covered it in tin foil
and tied everything in using the methods from before.
For the branches I found a matte acrylic paint that matched the color of the wood.
To get my cords to the cork bark I sent string down the tube.
Tied that string to the end of the cord and pulled it through the tube.
Pushed my hose down the tube that will be attached to my small water pump
creating a waterfall. Put on a tee fitting.
Did a quick water test. I'll show you later on in the video how I adjust the
water flow. Drilled some holes in the bottom of the
planter so water can escape and doesn't waterlog my substrate
or rot my roots. The cool thing about working with zupoxy
is I'm able to pull out all the existing spray foam making more room
for the plants and soil. Got the polythene put up on the rack.
Installed the bulkhead for water overflow I drilled previous to this
build. I'll post a card in the top right corner now.
This is just a prototype of a 3d printed screen that will prevent things from
falling down into the pvc pipe. But I am working on a 3d printed store
that's going to have all your supplies for enclosure builds. I'll share the link
down in the description below. Applied Sullivan cement to a piece of
pvc pipe that went into the bulkhead and fused on a half inch pvc union
and screwed on the union. This makes it easy for a quick release if I ever need
to move the enclosure off the rack. This system will make it easy to drain my
substrate area and the false bottom without waterlogging my substrate.
Did a water test for 72 hours to make sure that the land portion
wasn't having any water seepage. All was good so I continued on with the build.
Gave the enclosure a good rinse. For the land area I'll be doing a false
bottom with clay balls as its first layer.
Added weed barrier to separate the clay balls from the substrate.
I found it easiest to hydrate the ebg mix while it's still on the bag.
Then dumped it in. Filled up the planters with substrate
and got ready to plant. The reptile going in doesn't really climb and spends 90%
of the time in the water so these plants are really going to
have the opportunity to take off and fill up this pollen area. Just a
side note, I did quarantine these plants for about three weeks,
removed all the substrate and washed off the roots to remove
any fungus gnats or hitchhikers. Gave everything a good spray down.
I wanted the camouflage in the filter so I scuffed it up with a wire brush.
I could have just painted it like I did the background but I wanted to add a
little bit of texture so I applied some zoopoxy.
I also plugged the bottom inlet to prevent sand from going through
and attached it to the base. Placed in my water hides,
rinsed off some play sand and of course honey had to stop by and check up on my
work. To help rinse it quicker, just moving the
sand all around in the tub. Dumped it out and repeated this a few
times. Once feeling confident that it was nice
and clean, added it to the enclosure. Filled up the pollen area with water.
Placed in some dragonstone. This will look super cool with the reptile that's
going in. You'll see why here shortly. Added spiderwood to make it look like
roots coming over the bank. Applied sphagnum moss over the ABG mix
with a top coat of leaf litter. A few additional accent pieces of cork bark
for a land hide. Secured on the bracket for the mist king nozzle
and pushed the nozzle through. Put the lid on top of the enclosure.
Added some glass panels so I can regulate the humidity.
Pulled some plants and moss from another polydarian build I did.
I'll tag that video in the top right corner now. One of the cool things about
having multiple enclosures is you can always pull plants from them
and add to your new build. To adjust the water flow in the waterfall,
I simply added moss over the top of the tee fitting where the water comes out.
One of the coolest things to look at in an enclosure is moss, so I draped some
more over this branch. Added in some springtails
and some isopods to complete my cleanup crew.
For some of the plants that won't be buried in soil, I simply took sphagnum moss
and wrapped fishing line around it to keep it in place.
And wedged it into cracks and crevices. Added the new Arcadia Luminize Shade
Dweller UVB bulb that ramps up and ramps down,
creating a more naturalistic environment for the reptile.
Especially since the animal going inside won't require a lot of light, so I'll be
able to dim it as needed. Before showing you the finished
polydarium and the animal that's going to be going inside,
I'd like to give a special shout out to my Patreons. They were able to see all
the behind-the-scenes content watching this polydarium come to life.
Let me introduce to you one of my dream species, the Lanthanotis boriensis,
also known as a Borneo Earless Monitor. Ever since I saw a picture of one of
these, they looked like little tiny dragons.
And I knew one day I would love to have the honor and privilege to be able to
work with one, alongside making a pretty cool
naturalistic enclosure to display his beauty.
I do want to give a shout out to Cold Blooded Shop for working with me and
sending me this six-month-old. Let's show him his new home. It's always
rewarding watching an animal go in his home for the first time.
He swims around getting used to his new surroundings.
Going back and forth, this is the most room he's had since a hatchling.
Coming up for a breath of air, at that moment he realizes
there is a whole world for him to explore. It's going to be amazing to
watch him roam and make it his own kingdom. Having
waterfalls to simulate natural moving water
that he can use as enrichment inside the habitat.
He can dart off in a moment's notice. For me, there's something about water
features inside of a polydarium. It just draws me in and makes it its own
experience. As he feels safe in the water, he
Becoming more and more comfortable as time passes.
I wanted to share with all of you a simple way on how to build a polydarium
so you can create one for yourself and build something unique.
Having naturalistic art inside of your home.
He did investigate his hide for a little bit before returning back to the water.
He's still a little unsure about going up onto the land, although he did make an
attempt. One of the cool things about building
your own home jungle, is plants will start to sprout that you
didn't even place. But such is nature, it will take over. Drop some ideas for a
name down in the comments. I'm thinking maybe Earl the Earless
Monitor or Vincent Van Gogh. To me, this is such a mysterious and
amazing species and I'm super excited to continue to
work with him as time passes. When he's full grown anywhere between
12 and 16 inches, I'm looking forward to building him an
even bigger and closer. Make sure to check out some of my other
content for more tips and tricks. If you made it this far on the video, do
me a favor, like, comment and subscribe. It really helps this channel continue to
grow. For a full playlist on an 8x4x6
polydarium series, check it out right up here. For an
advanced polydarium, check it out right there. For some other
videos you might like, check it out right here. Thanks for
watching.
