Building Britain! - Bolt Action Konflikt 47 & Very British Civil War - Wargames Terrain How To

Mini Universe
4 followers
6 Video Views·Aug 14, 2026
00:00 Intro
03:46 Adding Details
06:11 Painting
13:16 Mortar
16:22 Windows and Wallpaper
20:00 Posters and Signs
22:55 Dust and Grime
AI Generated·May contain errors
Video Summary
AI GeneratedThis guide demonstrates how to realistically paint and weather 3D-printed red brick buildings for tabletop wargaming. By utilizing time-saving techniques like sponging, pigment washes, and simple household materials, creators can achieve a detailed, lived-in British town aesthetic that withstands the wear and tear of active gaming.
Wars are fought all around the world and they're usually fought in previously mundane places.
Lots of our battlefields try and look fabulous and otherworldly whereas today what we're going
to do is centre realistic looking buildings for our battlefields in the easiest most energy
effective ways. For this I've chosen the Dunwick houses because I just really liked the character
of them. I've been dreaming of very British civil war as well as doing a conflict version
conflict 47 version of it. If you follow this video it is a multi-faceted thing that you can
use in most game systems. Today we're going to be looking at taking a 3d print and basically
producing as high a quality end piece as we can whilst also maximising the effort that we put in
or maximising the efficiency of the effort that we put in. So we're going to be doing a
load of techniques but things that I think are perfectly achievable by everyone we've got.
Mainly we're going to be using sprays, stippling, sponging, some washes and a little bit
and techniques like that in order to achieve our maximum bang for buck in producing some streets
of Britain actually in this video. Now all these techniques can be used in producing things for
Holland, France, all over the world in fact because we're going to be producing a red brick house
and they're found absolutely everywhere. I was in Taiwan a few years ago and they're using red brick
in some of their historical buildings so absolutely anywhere these techniques can be used
and this is actually for a conflict table that me and Philburn are doing jointly between us. We're
doing the Yorkshire Lancashire border where one side of obviously the Great Divide is going to be
my pieces and one side of the Great Divide is going to be Philburn's pieces. So for my side I've chosen
some Dunwick houses which are produced by Mardav Miniatures. Now these are really nice 3d prints
models and one of the things that I really like about them is the gap not only the character of
them but they take to the techniques that we're going to be doing in this video really well. Some
of the problems that I found with other 3d prints is that say the the mortar lines aren't deep enough
or the details aren't not exaggerated enough but aren't prominent enough in order to make it an
easy paint. It reminds me of say like I always go back to painting this fifth edition
this fifth edition Bretonnian damsel with hand sculpted and it just took paint really well and
was enjoyable to paint and these Dunwick houses have been exactly the same. Now if you like what
you see during this video please do all the youtubey things liking commenting subscribing
it really does help to get this video out to more people and it really helps
this new terrain channel that we've got to grow and become a sustainable thing for the future.
So let us know what you want to see coming up. Operation Market Garden is soon in fact we've
got an event on the 19th of September that I'll put a ticket link below but if you want to see
Operation Market Garden terrain let us know and yeah let's get into the build. So the first thing
I did is printed out this building in brown. Now I always like to print all my 3d prints in brown
because it gives a layer that if you chip the model at the end it's like a bit of future
thought if you chip the model closer to the end of the process or the standard wear and tear of
gaming you chip into a layer that won't be noticeable particularly rather than like a
and you flake some paint off and it's there is obvious luminous green on the table or even white
stands out loads. If you are 3d printing yourself a hundred percent if you're gaming with it choose
black I like brown so that I can see that I've spray painted on top of it but choose a color
that won't register to someone's eye if the paint comes off or wears off. Now I wanted to make this
model at least a little bit my own so what I decided to do for that is because I'm doing
British town I'm actually basing this on a pharmacy near me in its look so I wanted to make
it like quintessential like 1930s British town and for that I decided I definitely needed some flower
beds and it's really simple to do it's one of the things is if you just have some balsa wood match
sticks coffee stirrers lying around then it's really really simple to just add some additions
so what I did is I measured the length of the windows put match sticks at the corners of a
coffee stirrer that are the length of the windows apart that gave me a framework to glue on to
and then I used coffee stirrers to just do a bit of a return of about five mil back to the building
now I'm then going to fill that up with hot glue in order to just give it some base at the bottom
of the planter so I don't have to fill it entirely with dirt or something like that
I can just put a layer of dirt over the top and then we can texture it later so that that was all
I felt the need to do actually on this year I want this is the first Dunwick building that I was
painting and I thought that it just gave it a little bit that I could be like yeah that's my
little piece on the front of that planters I then go outside and I spray it all matte black by colour
forge or just any cheap black acrylic paint colour forge is good because it's very grippy
in its matte form and then I've given it a layer of trench brown as the base coat for all the brick
areas that is going to be nice to build up on for the oranges and reds of the red brick at a later
date finally I've just given it a spray of like off white or desert sand I got these like desert
sand from sprayster for about two quid but white bone works perfectly fine just any sort of
dusting of a white or off white will give quite a nice effect and start to look not uniform it
will look lived in so long as you don't do a flat white coat that just doesn't appear in the world
much as soon as the weather hits it next up within the process we're going to start putting on our
brick textures now this particular model has flat bricks on it rather than a textury stone
effect which I find can be too dramatic for flat man-made they're all man-made but fired bricks
red bricks rather than stone blocks it like so it's something that I actually like about these
3d prints because as soon as you start texturing it in such a fine scale it becomes exaggerated
and so we're going to give it texture with the painting that we're going to put on now we could
do that with painstaking horrendous brushwork but instead what I'm going to do is use a sponge and
I'm going to and I'm going to start with proacryl burnt orange as well as kalahari orange by scale
75 I'll get them both on my palette at the same time which is just this actual wet palette that
uses a dry palette all the time been my favorite use for it that and I'm going to start with the
dark orange burnt orange from proacryl sponge it on round all the brick areas going fairly heavy
maybe like a 66% coverage but looking for a random effect across all of the brickwork
I'm next gonna then go over that with the kalahari orange and just start working kalahari orange into
the burnt orange sections covering up maybe like 30 to 40% so I'm getting overall then a coverage
of about like 30 to 40% of the trench brown which has been darkened by the black the burnt orange
is going to be sponged on and I think I said 60% of that and then 40% of that so it's just
working down gradient in it and don't be scared of going back over areas I think I did two or
three going backwards and forwards I'm not washing the sponge out or changing sponge between colors
I'm just letting those colors blend in with each other on my sponge and mix and then going over to
give natural tonal variation across the brickwork finally I started adding in some dark umber
or like just any dark brown slight reddish tinge to that mixture because I wanted to give like a
double fired brick look to it this wasn't a you see a lot of buildings in say Holland that are
very flat very red like if you from the UK like an engineering brick which is just a flat color
across the UK we get lots and lots of bricks that have this tonal variation across them from either
being reused reclaimed bricks and ones that have been fired multiple times to make them much harder
in and I don't know why they do that if you if you know why they double fire bricks let me know
I've never worked it out because you don't have to do it with all of them maybe it saves some of
the bricks but yeah that's these multiple varianting not worrying about the tone of
these oranges and just getting some random mixes in there is going to give us that aged reclaimed
brick look don't take too long this process probably took me about 10 minutes to do across
the entire building maybe a bit longer than that but certainly not a painstaking horrendous process
to do the next step is a step that I actually really hate and it's because of anything I really
hate giving a base color back to an area one thing I like to do is just constantly be additive
rather than giving a flat color back but we had to do it on certain places and one of them are
these stone corner pieces and I'm going to use light umber by Pro Acryl to do that I'm just
going to give a flat texture and that's going to give a real nice base for where the stone is where
the mortar is round the chimney pot so that we can work on top of it and start putting
Pro Acryl khaki or Vallejo any khaki followed by a dark ivory just stippled on top of that
light umber and it's going to give us a multi-tonal stone effect just really easily just working a
brush or a sponge over it to stipple on that various gradation up to closer to white but never
getting there never getting there only to the dark ivory and we're closing in on the end of
the brush painting it's something that I've tried to minimize during the paint process because
anytime I feel that we start acrylic painting brush painting on anything I find it looks more
and more like a painted model rather than a terrain like an actual real world piece I don't
know whether that makes sense but it makes sense in my own head so what I'm going to do is paint
any of the details that need picking out in a turquoise it's Pro Acryl turquoise for this
and luckily these areas are areas that are painted so I'm going to do the drain pipes
and some of the windowsills look really nice in turquoise I've been doing that more recently
on other buildings and it's something to just give a contrasting color like I mean I live
with this color wheel next to me and turns out it's going to give quite a nice complimentary
split to the brick red and orange to have a turquoise on those downspouts and any of the
other painted regions the next step is where we're going to bring the brickwork alive now
we've done this in previous videos we've done it in the Philburn did it in his stone church video
he's done it in his workshops video and I'm going to be now using it in this pharmacy video
or for a British town European worldwide red brick video so I'm going to take some airbrush thinner
and I'm going to mix it with pigment powders now the one I've not settled on one that I exactly
like for this I've been using a really old bone dust from forge world that they no longer produce
but I've not actually found one that goes perfectly so I've been mixing a couple bone dust
ash ash gray as a mix works really nicely but pick a contrasting color it's a sort of like
gray yellow pops really well with the red because the yellow is a nice contrasting color with the
red or say red orange red and yeah what we're going to do is mix that down into a really thin
wash consistency try and go based on when you see me apply it to the model what your wash should
look like I did it quite successfully here and if I say so myself um one thing that I've learned as
well is I didn't do it on this model but I thought after doing this why didn't I gloss varnish this
model first so that the wash gets pulled into the crevices more easily so I've done that on future
buildings that are coming up on channel where we do different effects to them but I did that for
this step and it works really well so gloss varnish first then put this pigment powder wash over and
when it's starting to dry I found it helpful to sort of wipe off with a sponge or with some
tissue paper some of that wash from the main bricks now this isn't something that you can
get wrong and it just stays wrong forever it's like an oil wash in that you can dilute it again
it will go back into being like sort of a wash and you can just remove it from your model so don't
be scared of getting it wrong you can get it wrong multiple times and then get it right
and yeah just crack on it it's a really nice simple effect and it achieves a lot I think as
you can see even as I go across the building actually as a closing thought to this with me
saying you like I use these pigment powders you can see that I actually use different mixes of the
pigment powder across the building I really went over areas with different mixes of the pigment
powders so just wanted to highlight that up as you shouldn't be worried about the specific
variation of the color that you're putting onto this because you can change it over time and
weather it at future steps to make it exactly how you want the next step here we're going to get a
little doll's housey but it'll pay off trust me what we're going to do is make windows for our
buildings and to do that we're going to use blister pack just from any of your hobby supplies this is
a dirty one but get a clean one and just we're going to cut out squares that we're going to glue
to the backs inside of the building and yeah it's just really easy mark it out mark out the windows
measure them cut out the squares I found easiest to do multiple banks of windows at once but on some
3d prints depending on how they've been designed it's easier to cut out the specific panels now
before you glue them in since doing this building I've realized if you cut out the windows before
gluing them in we're going to do the next step of the wallpaper in you want to size up your
wallpaper in before gluing in the windows make your cuts for the wallpaper and then we're going
to glue the windows in followed by the wallpaper so let's see how we make the wallpaper so for the
wallpaper what I tend to use put onto it by filburn is origami paper now not all of these designs are
period for the actual periods that we're going to be using but it's a really easy material that you
can start getting some color into your building and again we're not painting the actual buildings
for this it's all sorted out for us so what we're going to do is cut out the windows and first cut
to the height of all the walls your wallpaper that you're going to put on next if you press
that with one hand against the window and then draw around from the outside you know to cut
slightly over what you've marked for to cut out for the windows doing that before you put the
panes of glass for the windows in means that you can have marked them next you can then glue in
your windows and then pva your wallpaper to the walls both pva on the wall wallpaper on pva over
the top and really really fast it looks like we've done a great deal to these houses in addition to
that taking it one step further I wanted a green jade green bottom to some of my windows on the
ground floor to make it look more like an advertising shop pharmacy so I've taped off some
of the windows and I'm just going to hit that with again I think I used a citadel warp lightning
spray from an airbrush over the bottom to give a flat straight line across the panel of window
and that used to go across the ground floor now also on the ground floor I'm going to add
tile to the flooring and for that again origami paper this is with a checker design on it that
look but it just gives more and more variation like I was watching episodes of dad's army while
doing this and the the minimalist design that we have nowadays was not present in the past
everything was chaotic and and over busy at all times so again yeah and just measure out this
origami paper pva it down and it's another level to what we're doing just built on top of each other
we're increasing in pace now so I wanted to do the signs that are going to go on the front of my
pharmacy so I printed out just some paper with some signs on it what I tend to do is if I'm
printing out for just a single building or a couple of buildings couple of pieces I tend to
print a range of sizes that all could potentially be right even if I think I've measured it exactly
I tend to like do four five different signs up and down from the one that I want so because I'm
using that paper anyway I'm using that printer anyway so it's just easy at this point so that
I don't have to repeat on other pieces of paper the process of doing it so I select the one that
fits easiest I've given a varnish of that piece of paper I use a laser printer but even with ink
printers both of them I found run when you start pvaing them so I've varnished the paper
cutting it out at the correct size and I'm just going to give my shop some signage and then we're
going to get some posters on there as well these posters I've just collected from the internet what
I'm going to do is I'll put them on the Barefoot Miniatures Patreon and the free tier so you can
join the free tier grab these posters and they'll just be hosted on there forever you can
join and leave the free tier and it costs you nothing to get them so yeah I cut these out again
it's the same with the signs varnish on spray over cut them out pva them on pva over the top
it couldn't be simpler I sort of I'm trying to think of more things I can tell you about this
process but it's very very simple and the amount of character and life that it adds when you do it
is just phenomenal I actually do a bit of acrylic painting here where I'm going to put some football
posts and some cricket posts onto the back of the building just like where some kids have been
knocking about with a ball just adds that element of life to it and I'm also at this time going to
add just a little petal and flower design to the flower boxes at the front in the flat above
the pharmacy it's just little elements that it doesn't matter if your hand wobbles when you're
doing them it doesn't matter anything because someone in real life will have painted those
and they make everyone makes mistakes whether it's on a house in real life or you on a model
so just painted them on by hand quite roughly in white yeah it's chalk I actually broke my rule
I'm using white and we just get that and then we're on into putting dust sprays onto the entire
building so I love this dust spray it's a mixture of Tamiya flat earth and flat flesh 50-50 mix
thinned down about like if 50% of the mix is paint 50% of the mix is thinner but you've got
to vary that based on humidity temperature everything like that if you airbrush you know
what I mean and yeah I'm going to apply this very thinly just to give a clouding and sort of a blur
distortion over areas of the model into the glass panels because if we're playing on these tables I
don't want it to look like it's the village fair everything's being scrubbed up this is currently
or about to be a war zone so I give dust everywhere all over the windows actually
it's worth saying if you want cracked windows just use a scalpel when your windows have
just been entirely dried and you can just push through the blister pack it's thin enough and
you can just crack your window and I tend to focus a bit more dust around there as well where
so yeah I'm just focusing on the maybe bottom third of the building building up some dust where
they've not cleaned and this is a step that I do on so many models it hurts second to last step
I've got some gamers grass flowers I just chose the most bright colors that I could and it came
out red white and blue great British flag all over that so red white and blue flowers I just
alternated some colors placed them in I'd already filled I put them so teeming with life that I
didn't feel the need to put dirt in the bottom of the flower beds so it just allowed me to cover
that up that bit of hot glue that I squirted in there earlier and then the final final step
is going to be some enamel paints to give some weathering especially to those posters and to
the stone so I've got two enamel paints open here I've got winter streaking grind and engine grind
I've got some thinners and I'm just going to apply them all over the model horizontal surfaces
are really good for applying them for anywhere that's bright is really good for applying
enamel paints to and these are very good they're just like fast drying oil paints so I'm just going
to slap them on the model I can reactivate them with thinner and I'm going to streak
different areas and do sort of a wash over lots of posters streaks over posters winter
streaking grind particularly in the windows I just felt it looked a bit wetter like the British
weather and yet after I've done that that is the culmination of the process I actually was really
really happy with how this building turned out hopefully you enjoyed watching this video
definitely give it a try yourself I'll stick Mardav Miniatures in the description I definitely
recommend their Dunwick models I'm biting my fingers off to get to the next one I've just
done a pub and yeah I just can't wait to start fleshing out this village more and more because
I think it'll be great for doing operation sea lion stuff very British civil war massively
interests me because I'm a massive nerd for that and also conflict set within the British Isles
like an uprising of the machines or Luddites smashing the machines me and Philburn have both
got armies for we're definitely going to be doing something like around that so it lets us start
fleshing out that for our Wallace and Gromit Yorkshire Lancashire conflict and with that
hopefully you enjoyed it I'll catch you in the next one
