FINALLY Expanding My LEGO City: MASSIVE Bridge and Thousands of Bricks...

Happy Lego
25 followers
8 Video Views·Aug 12, 2026
AI Generated·May contain errors
Before moving my entire LEGO City to a much larger space, it's time for one more city expansion.
This final upgrade adds a huge suspension bridge and a brand new canal.
To make room for it, we add 12 new base plates.
At this point, we've pretty much reached the maximum capacity my current LEGO room can handle.
This entire corner of the layout will become part of the waterfront,
so everything starts with a black base layer before then being covered up with water tiles.
As always, building water means going through thousands of pieces in no time.
The goal is to build a canal leading into the harbor.
Not a river, but a man-made canal.
To make that work, we first need to extend the existing harbor walls.
The issue now is this connecting point though.
Everything is shifted by half a stud.
That goes all the way back three years.
Back then, everything was constructed at an angle,
and to make it connect smoothly, we had to use jumper plates.
Now we're paying the price for that because I have to work with this half stud offset.
We'll of course have to get rid of that in just a second.
The front section once again will continue in the exact same angle style as the rest of the city.
In the end, you shouldn't be able to tell which parts were added recently
and which were built three years ago.
Back to the half stud offset I was talking about,
and we're using a simple trick we've actually already designed years ago.
These small walkways here.
We now exactly align that with this small offset.
It completely gets rid of that problem.
By the way, it's built using hinges and wedge plates,
which allows this clean angled transition.
The exact same building technique we've used for the rest of the harbor as well.
Now the canal doesn't just go down a straight line.
Instead, it makes a small bend here and then continues at an angle across the layout.
It instantly makes it more interesting and breaks up the straight stud pattern.
The exact angle of the harbor wall is defined by wedge plates,
and the structure underneath simply follows that angle built with hinges.
It's a super simple technique,
but one I always enjoy because it gives such a clean result.
For now, we can already roughly prop everything up
and get a sense of the final height later on.
We're not doing any detailing just yet.
The goal is just to establish the basic shape.
On the other side, where the canal enters the harbor basin,
we do the exact same thing again.
Another 45 degree angle.
Since it's all mirrored anyway, I won't go into every step once again.
We've also raised the harbor walls using the usual style.
Dark bluish gray at the bottom to represent wet stone and light bluish gray on top.
At this point, it's really starting to feel like a proper canal.
On the opposite side, we might build a slightly wider section
so ships can turn around or briefly dock,
but how exactly that will look like will be decided in the future.
Next up, we need to build the transition between the new expansion and the existing city.
For that, I've prepared this wall section supported by arches.
So we can carry the city's design style seamlessly into the new area.
Once again, the main goal now is that you shouldn't be able to tell
this was added three years later.
It should feel like everything was built as one continuous project from the start.
Here at the corner, we've added the first staircase leading up to the upper part of the city.
I filled the small half plate gap with a gutter piece.
So that problem now no longer exists.
The whole area is tiled just like the rest of the harbor.
And now we can start adding some vegetation.
Since the entire area around the canal is artificial,
I don't really need to worry about any natural transitions,
which actually makes things a lot easier.
We also added street lights to make the canal feel more alive at night
and flowerbeds along the angled walls to highlight the shape of the canal even more.
Before we can continue building down here,
we now need to focus on the bridge that will cross both the canal and the expansion.
I already prepared the base for it,
although I must have measured it about 20 times before I was finally sure the position was right.
The challenge here is matching the style of the original bridge half.
Most importantly, in the end, it should look like one large bridge
and not two separate pieces joined together later on.
To achieve that, I basically now mirrored the original design,
including the large suspension structure with its cable system.
In this case, it was actually quite nice for once not having to reinvent something new,
but just recreating something I had already worked on previously.
The road connection uses the same technique I always use throughout the entire city.
And once that was done, I could simply slide the road down the bridge and connect the two parts.
This was actually the key moment where it becomes clear
whether the bridge looks like one structure or two separate parts stitched together.
The final step was now connecting the suspension cables.
At first, though, something didn't really add up.
There were weird gaps everywhere and the whole thing wasn't symmetrical.
I also have to say that at this point it was already about 5 in the morning.
I spent about half an hour trying to find the mistake
before realizing I had placed one extra brick compared to the original build.
I mean, that's what happens when you spend the entire night building
and can't stop even though you really should go to bed.
But fortunately enough, I found that mistake,
so I could then finally go to sleep without having to worry about that.
Once this mistake was corrected, I finished the suspension system on the other side as well.
And with that, the bridge extension was complete.
I don't want to praise it too much, but honestly,
I think it looks significantly better than before.
Looking back, the old bridge almost feels incomplete now.
And funnily enough, during the original build,
the suspension design wasn't even part of the plan at first.
We originally had support pillars on both sides, which were later on removed.
And now three years later, it's a completely different design.
I just wanted to show you how these projects evolve.
And I think in the end, this is what LEGO is all about.
Oh yeah, and there's one more major improvement you guys probably don't really know about.
The bridge now no longer stretches quite as far to the edge.
It now ends a bit further back since we had a few accidents during open days.
So we adjusted the design to make sure that doesn't happen again in the future.
Since at this point, everything is still way too empty.
And of course, way too gray.
We'll definitely add a few details.
And of course, trees.
The first tree right here I'm currently placing is already quite important.
And then as I was continuing work on the tiling,
I also added two benches towards the water.
When it comes to the transition from the lower platform to the upper section of my LEGO city,
we of course continued the exact same style of railing we also used in the rest of the city.
And now, even though this is structurally absolutely unimportant,
I always love these small hidden details.
For example, LEGO has now released these life rings.
Brand new pieces, which are literally made for a harbor and canal section.
And therefore, I decided to add them along the wall.
It immediately adds color and realism to the area.
And also, of course, I used them in the older parts of the city that were already finished as well.
Now, before we continue work on the canal and harbor section,
there's still a major gap remaining within the LEGO city,
tucked away behind this corner right here.
And we definitely still need to fill that up.
And especially in these hard-to-reach areas of the LEGO city,
a ton of dust accumulates over time.
We've tried pretty much everything over the years,
removing minifigures and then brushing off the dust
using a vacuum cleaner combined with blasting dust away with an air compressor,
which till recently was the only way to reach some of the tight spots.
But of course, it's super annoying to use.
So I was genuinely excited when Fantic decided to sponsor today's video.
They've developed this electric air duster that's basically perfect for what I need.
It replaces the bulky compressor I used before,
works even better and is so much easier to carry around the LEGO city,
since I don't need to plug it into the socket.
With five different power levels, plus the boost mode,
it's not only super powerful, but you also have full control.
If you think it'd be useful for you too,
you can get 10% off on Amazon with the code BCSB10PM at checkout.
You'll find the code and link below in the video description.
We've also been using Fantic's F2 Master Mini Multi Tool over the past few months.
It comes with different attachments.
For example, we've been using the drill attachment to route cables and tight spaces,
where it's much easier to work than a regular drill.
The other attachments are great for making small notches,
whether that's modifying LEGO parts when there's no other option
or creating a small channel to run a cable around the corner.
If you're interested, you can get 16% off the rotary toolkit with the code BCSF2MST,
also linked in the video description.
Both codes for the electric duster and the rotary toolkit are valid until September 30th.
Having now prepared this area,
I begin by taking measurements for the new building that's going to be built there.
Then we quickly finish off the tiling.
Of course, that's very basic since it's hidden away in this back section.
I don't want to spend too much time on that, but still, it has to be done.
And then when it comes to the interior of the building,
I think you know by now that I love adding these curved staircases
because they save so much space, especially in smaller buildings like that one.
A few pictures go on the wall to add some color.
And then when it comes to the rest of the interior,
this is supposed to be a fast food restaurant
with this open grill right here and a burger currently being prepared.
The outer facade, of course, once again is highly inspired
by every other building I've added in this section of the city,
simply because I want to continue this European building style.
And another benefit of that, of course,
is that at some point you get really quick with designing these new buildings
simply because you can reuse an existing repertoire of different stylistic elements.
So that's super practical.
The first floor that goes on top basically is the same,
but without a door in the middle.
And then for the roof, I experimented a bit with these so-called de-snot elements
simply to add a bit of structure along the edge.
The roof itself is built using normal dark bluish gray slopes,
another building technique I've used for several other buildings as well.
But once again, that's important to keep this style going.
On the outside, I wanted to add this printed burger tile.
And with that, the building is finished and can be placed into the city.
Before that, I placed a few plants here and there in this back section.
Once again, nobody is going to see that,
but it's important for me to know that it's there.
On the outside, I added another seating area,
which I then decided to separate even more from the street,
because at this point, this area was still lacking life
and plants were the perfect solution for that.
Also, I was experimenting a bit with these brown elephant trunk pieces,
which unfortunately aren't super stable, but they work well visually.
So I decided to add them in the back.
Another thing that really annoyed me for quite some time now
was the backside of this bank we've built a few years ago.
Especially when you come around as a visitor,
you still see this very empty blank facade.
And therefore, I decided, well, I don't want to completely rework that.
I at least wanted to add a few windows on the backside as well,
because it looks better and it's more realistic.
But once again, the most important thing is that
this isn't another front facade.
So therefore, I kept it very simple in this case.
And now I think as I'm adding that building once again in this spot,
you can see how important it is to simply have added these windows.
Another thing we've been working on,
and this will most likely surprise most of you now,
we've started taking the LEGO City apart on the far side
we're not currently working at, so where the airport's at,
because we are now starting to slowly but surely
move the city to a larger space.
And since this section is finished anyways,
and we currently can't work on that,
everything is of course carefully stored
to be reassembled in future once again.
But for now, we wanted to gain space for new projects.
And then in the meantime,
while we're working on expanding the city on the other side,
this part now slowly but surely starts moving to our new location.
In the meantime, we've completely reworked our pirate model
because that's what's now going to be displayed
where the airport was before,
simply because it's more interesting for the exhibition
and especially for visitors coming for the fourth or fifth time.
So we of course have to switch things around here and there.
But the important thing you need to take away
is that in future, of course,
the entire LEGO City is going to be reassembled
and also massively expanded
because we still have the entire industrial area
that's currently not connected to the city.
And for everyone watching on YouTube,
and I mean, that's the majority,
my goal is to keep the break of LEGO City updates
as short as possible.
And therefore we'll move everything step by step
so we can keep the series running.
Of course, I'll keep you updated on updates
regarding the new space as well.
But before we can even start to think about building LEGO there,
there's a ton of stuff to be managed and organized.
So I'll keep you updated as soon as I have news.
And then there'll of course also be a tour of the new location.
So just be patient.
In the end, I think it's going to be worth it.
Thank you to Fantic for sponsoring today's video,
especially the electric duster has been super useful for me.
So maybe it's interesting for you too.
And with that being said, that's it for today's video.
I hope you enjoyed and I'll see you again in the next one.
