Testing A Lego Vacuum Engine with a Speedometer!!

Lego Happy Time
8 followers
10 Video Views·Aug 10, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThe creator demonstrates a custom-built LEGO speedometer connected to a vacuum engine. The device uses a gear ratio to translate engine rotation into needle movement, allowing the user to estimate the engine's RPM based on visual benchmarks.
Hello everybody, in this video I will be showing you my lego speedometer.
So here it is and it's connected to my lego vacuum engine here and it passes through a 8.75
to 1 gear ratio to slow it down and increase the torque. So once it comes here it spins this piece
right here and what happens is when it spins faster these two pieces like spread apart and
because that happens this moves up and when this moves up you can see how it kind of connects to
the needle. So that's how it works I have a few markings here this is 100 rpm this is 150 rpm
so I don't have anything I don't have an actual tachometer so I can't check like
completely on the scale but that's the few measurements I have and you can see now if
I just spin the wheel here it moves up a little bit so yeah that's like the that's how it works
and now let's see it run. Based on the test we can see that the needle when running at full rpm was
around here and from with a full throttle here you can see that our benchmarks are 100 and 150 so
if we just 150, 200, 250, 300 like around 350 so at 350 rpm that's how fast it was spinning
out here so then you have to multiply it by 9 or 8.75 to get the true speed of the engine
Thank you so much for watching! Bye!
