My Dream Home in Miniature | I made a tiny chest of drawers (with clothes!)

Miniature Dreams
9 followers
3 Video Views·Aug 9, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThe creator documents the process of making their first miniature chest of drawers for a dollhouse bedroom. Moving away from their usual strict planning, they adopt a more impulsive, \"measure-as-you-go\" approach using balsa wood. Despite some challenges with proportions and glue patches, the project concludes with a stained, hand-painted piece of furniture complete with miniature clothing.
Hello everyone and welcome back to another miniature making video. We are getting straight
into it today and I will be attempting to make my first chest of drawers. If you watched last
week's video you will know that I am currently in the process of putting together an illustration
exhibition with the cabin studio and gallery. There are 30 artists taking part and it's only
a week away at the time of recording this so it's all go go go at the moment. But that being said,
I did not want to let another week slip by without me finding some time for my miniatures.
So this chest of drawers will be living in the bedroom and this is the sort of style I'm going
for. Antiquey with a little bit of detailing. I don't want to be too ambitious for the detail
because as I said this is my first attempt at making drawers. Drawers that actually work you
know. So I figured I would put my energy into making sure the drawers work more so than the
decorative aspect of the drawers. I did actually take a slightly different approach with this build.
Normally I would sketch everything out on paper, figure out all the individual measurements and
then make a rough 3D version out of paper first. But this time I thought I'm just going to go
straight into it. Aside from working out the overall height and width I pretty much measured
everything as I went. Honestly I really enjoyed working this way. I think it suits my slightly
chaotic, impatient and impulsive nature a bit better. The other benefit is that it's much more
flexible and actually more accurate in a way because I adjust things as I go. I'm not forgetting
to account for things like the thickness of the wood which I definitely have a habit of doing when
I do plan everything out in advance. So for these drawers I am using a three millimeter balsa wood.
I do think it would have been much easier if I had used a slightly thinner one but three millimeters
was all I had so it had to do. As I said I am measuring and adjusting as I go along. Someone
suggested to me a while back that I should cut things slightly too big and then sand it to size
and that was excellent advice and seems kind of obvious now. But of course if you do cut too small
you can't really make it bigger and so that's what I did here. I'd cut it to size, check whether the
drawer fit nicely, if not sand a little more and so on and so forth. You may or may not be able to
hear Steve who is currently sat on my lap purring very loudly. So on this day it was super sunny and
warm because of that Steve spent the majority of his time basking in the garden so we don't really
see Steve in this video. For anyone new here and wondering what on earth I'm talking about Steve is
my cat and that reminds me if you are new here and you enjoy this sort of content and cozy vlogs I
would love it so much if you could subscribe and don't forget to hit the bell button so you never
miss a video. Hello everyone. I thought I'd show my face because I don't think I have in this video yet.
I've been avoiding drawers since I started my miniature making journey because I was worried
they'd be really difficult because if you've been following along you'll know I've had a lot of
trouble with cupboard doors so I thought pull out drawers would be even worse but actually
it's not too bad. They've come out all right. I've just painted some little beads
gold. You can't really see with like things this tiny. I find it's easier just to put the paint in
and just kind of shake it around to cover it all. I'm going to glue those to the drawers but first I
need to decide if I want to stain it or paint it. I don't know. I think possibly stain. I think
stain because this is going in the bedroom. Yeah this is going in the bedroom and currently there
isn't there isn't really much wood besides the bed frame so maybe I'll stain it and then I did
think it might be nice maybe although I'd be a bit nervous about ruining it to do some like
floral patterns on the front of the drawers maybe. I'll pop a photo for the sort of thing I mean and
but I really should have done that before sticking it all together because if I mess it up
it's not really any going back from that. I don't know but another thing I would like to do
is to make some clothes to actually go inside the drawers maybe have like a sock hanging over
the edge I don't know just to give it a little bit of character and personality and then at some
point I'll make some things to go on the top maybe a little mirror. I am going to get this stained.
I may regret that choice because as I've said before the problem I've used a bit of super glue
on some of the trickier bits on here the stain won't work on the bits where there's super glue
so I'm hoping it's not on any of the important bits. So I'm using my trusty old Jacobian dark oak
wood stain for this as always. I am actually starting to run out so maybe next time I will
try a different colour and maybe mix things up a little bit because at the moment every
wood item in my dollhouse is this exact shade and it might start to look a bit samey. I was
fighting the urge here to only stain the bits of wood that I would be able to see because obviously
once the drawers are installed you won't be able to see the inside of the chest itself however I
would know that it wasn't properly finished and I think that would bother me so I made myself cover
every inch or millimetre it's probably more appropriate. I will say I had a much easier time
doing this than I did painting the legs of the full-size dining table in my kitchen last week.
Update on that I have now decided that I love the colour I think it just took a bit of getting used
to and for anyone who's wondering what on earth I'm talking about in last week's video I upcycled
a table I found on Facebook marketplace and decided to try a very bold red colour which
definitely pushed me outside of my comfort zone a little bit but as I said I absolutely love it now
no regrets. We have drawers and I'm very pleased with them. I was right there are some kind of
patchy bits where the super glue was but I've gone over them with an acrylic marker and managed
to blend it in somewhat. I have decided as well I am going to attempt to paint some little flowery
patterns on the drawer fronts I might regret it if it if it goes horribly wrong I can always just
paint over the wood stain and then do something else so yeah I just need to stick the little
handles on draw my little pattern and then I'm going to make some clothes to go in the drawers
but I would I would like to have something hanging over the drawer having like a sock
or a sleeve I'm not sure how I'm going to do that I'm just going to have a rummage in my
little fabric box and see what I can find a bit of fluff on there. I decided to use one of my Art
X acrylic markers for this again I didn't actually plan beforehand what I was going to do here
I just sort of freestyled it I do think I need to invest in some paint pens with finer tips however
these markers are lovely but for super tiny refined details maybe not the best option
I next fitted on the drawer handles I used super glue and just tried my best to get them
lined up but you may notice as with everything I make it's a little wonky I do think adding
these really brings it to life it also distracts somewhat from my slightly shoddy line work
finally I moved on to making some clothes to put in the drawers
I didn't make actual clothes that is slightly beyond me at the moment I just cut out small
squares from an old pillowcase folded them into the desired shape and used my acrylic
markers to add some patterns to them finally using the sleeve of an old jumper I have actually
used this jumper to make a blanket on the bed as well as used it for upholstery for my desk chair
which I pushed some metal wire into so that I could bend it into shape because without it the
sleeve would just kind of stick out and wouldn't look like a convincing floppy sleeve which is
hanging out of the drawer I got this idea because years ago I don't know why I remember this
I watched a I watched Twilight and it was the version where they have you know when they have
the actors doing a sort of voiceover over the film like talking about the making of it
and Robert Pattinson in this one particular scene he was wearing this shirt and the costume
designer had put wire in the collar so that she could make it look effortlessly disheveled and
yeah that's where I got the idea so we're all done now so it's time to put these drawers into their
dare I say it I think I've made something too small
this is a first I think I've made it too shallow oh dear will I ever learn I was feeling very
confident when I started this this morning and I didn't even bother making my paper
my papered version before starting I just kind of went straight in and just
I was like yeah I've made loads of furniture now I don't need to check it
I don't know ever learn to be good though um I do need to remake the bed because the bed is
way too big the bed is the only thing in the dollhouse that I didn't make
um because that was before I decided to start making everything from scratch so once I remake
the bed these will probably look more in proportion but as a standalone piece I'm
really really happy with it I think it is adorable yeah I do feel like I should have
used a finer pen for the detail but at a distance it looks good yeah I'm only sorry I just don't
have more time to make more things today as I said the exhibition the exhibition that I'm curating
is only a week away so so very very busy at the moment but I'm really glad I managed to
find a few hours to make this adorable little set of drawers I hope you enjoyed this video
I will be back with more miniatures as always I'd love to hear any suggestions or requests for what
I should attempt next it'd be nice to get another room finished as always if you are new here or if
you haven't already I'd love it so much if you could subscribe I do upload new videos every
single week I'll see you next time bye
