Learn how your community can simplify and accelerate the process for adding these types of innovative and economical housing options at the Solution Summit for the Housing Crisis. https://improvepophealth.org/solution...
Credits are listed in the video.
~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
CGS Tech (formerly known as Cool Gadgets & Stuff) is a channel dedicated to highlighting innovative new technologies and projects, and informing what's new in the tech world. Thanks to all our subscribers and viewers for watching and also thanks to YouTube for making it possible.
Disclaimer: Copyright Allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.
Hi and welcome to Cool Gadgets and Stuff. There are many ways to go about building your new home.
Building technologies continuously improve along with the growing need for cheap and efficient
construction. Choosing a construction system is one of the key decisions when building a new home
and in today's video we'll explore some innovative building systems that offer an alternative to
conventional stick or brick built homes. Insulated concrete forms or ICFs for short
is a system of frameworks for reinforced concrete made with rigid thermal insulation
that stays in place as a permanent interior or exterior layer. These interlocking modules are
dry stacked and filled with concrete. The two insulated faces of a block are separated by some
type of connector. Units lock together similar to lego bricks and create a form for the structural
wall of a building. The result is a cast in place concrete wall that is sandwiched between two
layers of insulation material. ICF systems are strong and energy efficient. Traditional finishes
are applied to the interior and exterior faces so the building looks no different from other types
of construction. With panels available in a number of shapes sizes and concrete core thickness any
design can be created including curved walls. Panels can be shipped compacted and then assembled
onto frameworks on site. Units have an interlocking design that allows the forms to stack and lock
together to form a uniform cast and prevent improper alignment. Special units for corners
floors and roof assemblies improve the engineering of the system and energy efficiency of the final
construction. The blocks and panels also feature integral nailing strips for attaching interior
and exterior finishes and the ability to let in mechanical runs such as wiring and plumbing
without cutting into the concrete core. Reinforced steel bars or rebars are placed inside the forms
before the concrete is poured to give it flexural strength. Once the forms are in place and rebars
installed concrete is pumped into the forms. Forms are filled at an appropriate rate to prevent
misalignment and blowouts. ICFs provide benefits to builders and homeowners such as disaster and
fire resistance, energy efficiency, ease of construction, and faster build times. Auto-claved
aerated concrete also known as aircrete is grain building material made from natural raw materials
like sand, cement, lime, and gypsum as binders and aluminum as an aerating agent. It is poured
into large molds and steam cured in autoclaves during production to complete the strengthening
chemical reaction. This lightweight product provides structure, insulation, and fire resistance
all in one product. The Aircrete Building System by Aircrete Europe is a modular and complete
building system that offers a fast and efficient build. The system consists of standard sized panels
of different use such as floor panels, load bearing wall panels, roof panels, partition panels,
cladding panels, and lintels. Precise product dimensions, ease of handling, and lightweight
materials contribute to a faster build time and a reduction in the use of installation materials
and labor. The lightweight load bearing structure and the high compressive strength of the panels
make it well suited for earthquakes and hurricane prone areas. Panels also have embedded steel
reinforcement for additional strength. The super smooth surface of the panels allows for a quick
finish as the walls are ready for direct painting. Besides, all elements in Aircrete Building Systems
provide good thermal and sound installation performance. Aircrete products meet the highest
requirements of building standards, offering a wide range of innovative, efficient, durable,
and sustainable solutions for works of any size. Superior Walls offers a precast concrete panel
system that offers an alternative to traditional foundation methods. Typically used for basement
foundation but can also be used in above grade walls and multi-level concrete walls. Panels are
custom designed and built to provide warm dry basements for homeowners. Made in a factory
where high strength concrete is integrated with an insulated steel frame, they arrive at the
job site ready to install with insulation and studding integrated into the wall. Trained crews
install and permanently secure the foundation on a bed of crushed stone, so no need for poured
foundation. Solid concrete studs provide support, as does a built-in concrete footer that rests on
clean crushed stone. Panels are joined together by stainless steel bolts and sealed with a special
sealant. Installation typically takes less than a day and can be completed even in adverse weather
conditions. Backfilling can begin as soon as the floor is poured and the subfloor is properly
attached to the top of the wall system. Rapid insulation time allows builders to begin construction
on the home the same day. Steel studs eliminate the need for additional wood framing prior to
interior finishing. The company offers several configurations of the system to best suit your needs.
SpiderTi is a concrete forming system designed for just about any concrete wall application,
such as retaining walls, concrete homes, pools, roofs, etc. This system creates a temporary
framework by which you attach your plywood, using screws to hold it in place while the concrete is
being poured. Once the concrete is cured, you simply unscrew the plywood sheets, which may be
used again for future projects. SpiderTis are webbed so the concrete flows through them, providing
a solid monolithic concrete wall. This framework also holds rebars perfectly in place without
having to use tie wire. There is also a slot to hold insulation in place. Less labor is required
as well, because the heaviest part of this system is a single sheet of plywood. The amount of SpiderTis
for an average-sized house can easily fit in the back of a pickup. This construction system allows
for an affordable and easy way to build concrete walls of any shape, thickness, and size. It can
also be used as a form of concrete roof along with a concrete home. In a major storm, the first
casualty of a home is usually its roof. SpiderTi makes it possible to clad any surface with concrete,
the point being that if the roof is tied together with the walls, then the home is far more likely
to survive storms without much damage. SpiderTi roof system works with just about any masonry wall.
After the concrete is cured, the plywood can be left on to give you a surface to nail your roofing
to, or removed if using lightweight cellular concrete that will allow you to nail roofing
directly into it. Once it's all done, you'll have a beautiful home that can withstand whatever nature
throws its way, whether it be tornadoes, hurricanes, or wildfires. This next building system combines
the strength of reinforced concrete with many qualities of natural mineralized wood.
Isotex is a woodcrete building system comprised of cement bonded wood fiber blocks
and floor slabs, with an additional graphite polystyrene rigid foam insulation added.
Isotex system is highly resistant to fire and moisture with excellent thermal qualities. These
blocks are dry stacked and then filled in with concrete to create a high load bearing wall
structure. Construction is simple, no skilled trades are required, it's cost effective and fast.
Raw finish makes it ideal for internal or external finishes. Blocks are produced from
recycled, untreated wood from sawmill scrap and recycled pallets, subjected to strict quality
control. Isotex systems meets all the regulations concerning seismic safety and the acoustic and
thermal insulation. The result is an energy efficient house with lower heating and cooling
costs throughout the entire year. The company offers a complete kit of blocks for your build,
as well as comprehensive training and support, and already claims over 400,000 builds worldwide.
Thanks for watching, and let us know your opinion down in the comments.
Part 2 on building systems is also in the works, so stay tuned. Bye for now.