CREATE THIS ULTIMATE GLAMPING OASIS! Connecting the Coody Hub Pro & 17.2 Pro Inflatable Luxury

Outdoor Travel
39 followers
#travel #adventure #travelandevents
Video hướng dẫn chi tiết cách sử dụng phụ kiện kết nối để ghép hai loại lều hơi cao cấp từ thương hiệu RBM Outdoors (Coody 17.2 Pro và Coody Hub Pro) lại với nhau, tạo thành một không gian cắm trại "glamping" rộng lớn (12x28 feet). Nội dung bao gồm cách lắp đặt, sử dụng khóa kéo để nối lều và các gợi ý bố trí nội thất bên trong.
Comments are disabled for this video.
All right guys, here it is.
One of the videos at least that you've been waiting for.
Right now we've got these two tents set up.
This is the Cudi 17.2 Pro inflatable tent
from RBM Outdoors.
This is a 12 by 16 tent.
I recently put up my unboxing setup and review of this tent.
If you want, you can go back and check that out.
And the tent right in front of it
is the 12 by 12 Cudi Hub Pro.
This is also an inflatable luxury tent.
You can get both of these from RBM Outdoors.
I also just recently, like two or three days ago,
put up my complete unboxing setup and review
of this tent right here.
Both of these tents are absolute camping game changers.
You're gonna wanna check out those videos.
Again, this one is a 12 by 16.
This one here is a 12 by 12.
The walls on each of these are six feet tall.
The peak on this one and this one
are both right around seven feet.
And then the peak in the middle of this one
is almost nine feet tall.
So from that, you can already see
just how enormous these tents are.
And today, we're gonna make them bigger.
Right here, I have a connector
that also comes from RBM Outdoors.
And this is to be used with the 17.2 Pro and the Hub Pro,
those two right there that I just showed you.
And what this does is this actually allows you
to connect those two tents,
to take this from being a 12 by 12 tent
or this from being a 12 by 16 tent,
put them together and make them one giant 12 by 28 tent.
Now again, these things are all sold separately
on the RBM website, but if you bundle them together,
you get a better discount.
Cudi 17.2 Pro, Cudi Hub Pro,
and this is the connector for both of them.
So I'll show you what this looks like first.
This is it right here in this little bag,
has an awesome Cudi logo on the bag,
drawstring on the top so you can always put it away,
know where it's at.
That's everything that comes in the box.
This right here.
Yeah, it's literally that easy.
Now, if we come up and look at the doors
on each of these tents,
they both look exactly the same
because they are exactly the same.
And I've shown this in each of the review videos,
but you can see there is a zipper right here
around the perimeter of each of these doors.
You can unzip that around the whole thing
and completely remove the door on this tent
and the door on this tent.
And if you wish to do that, you can,
but it's really not necessary because as you can see,
you can completely open up this end
and that end of each tent.
The door just unzips up the middle across the bottom.
You pull the flaps back and tie them at the sides.
So you can see they're pretty much open
just as much as they would be
if you just went ahead and removed the entire panel.
Totally up to you, but this way,
it's just a little bit less work.
Now we can also come over here
and look under this flap here,
and there's another zipper.
Now this is where you connect the actual connector
that is gonna put this tent together with this tent.
This one has the exact same thing going on.
If we come over here and lift up the flap,
you'll see there's the exact same kind of zipper.
So this connector right here has zippers on both sides.
You simply pull those two tents together,
zip this to each one, and there you go.
So I've already got the Cootie Hub in position
where I want this tent to be.
So we're gonna be moving the Cootie 17.2 over
to match it up with the doorway of the Hub.
So the best way to do that is basically to prepare
at least one of these,
the one that you're not gonna be moving.
So we'll go ahead and take our connector out of the bag.
And then this is all it is right here, guys.
It's just like this six-inch piece of fabric
with a zipper on each side.
This is what's gonna hold your tents together.
So just like in a pair of jeans,
you wanna find the end of the zipper
that's gonna slide into the actual zipper fob itself,
get that part connected,
and just zip it around the entire perimeter of the tent.
Now I say the entire perimeter,
but what I actually mean is just from this corner over here
up around the top,
and it stops at that corner over there.
It does not actually zip all the way along the bottom,
but you'll see when I pull this over,
these are gonna snug up together.
That's gonna zip right up to this one.
The floors will meet perfectly together.
You could put a carpet over that inside if you want.
Now, for purposes of the video,
I did put these tents kind of far apart.
They got about a 10-foot span between them right now.
But when you set yours up,
if you know you're gonna be connecting them,
you're definitely gonna wanna be putting them together
way up here when you even inflate the tents.
I'm just gonna pull this one over to that one,
but you really wanna prevent doing that if you can,
because it's always best not to be putting friction
on your tent anywhere.
This is on grass, so it's really not gonna matter,
but if you were on like concrete or gravel,
you definitely would not wanna be sliding
your tent across that.
We've got a tarp under this tent,
so it should be fairly easy.
Remember to take out your stakes
and then simply pull on the tarp,
slide the tent right up until they're door-to-door.
Walk around and get your corners squared up,
and you can see where it just snugs right up
against the opening of the other tent.
And we've got the connector right here
that'll go right into that zipper.
Connect it the exact same way we did the first one,
and then just start to zip it up.
Now, obviously, you can't reach up and over,
so you have to go inside to complete the zipping.
So here's where it's snugged up together,
and we can just reach up here,
and we can find our zipper, which is right here.
Grab a hold of that.
Kind of hard to do while I'm holding the camera.
Hold on.
See if I can get this on film.
Yep, zip it all the way down.
And there we go, we got that completely connected.
The floors butt right up against each other on the bottom.
We pull that back a little bit,
you can see our tarps down there, they match right up.
So there's the Cootie Hub in there.
And then if we step this way and turn away,
we have now connected the Cootie 17.2 Pro,
and we can even pull these flaps up and tie them,
or completely remove this whole flap.
But just like we did with the others to connect them,
if we just pull them up to the sides,
you still have those flaps to use later for privacy
if you're camping with more people,
and it still gives you one long 28-foot tent.
And there's how it looks from the outside.
That thing is enormous, 12 by 28,
seven-foot peak down the entire thing
until you even get down to the hub
where it's almost nine feet.
So you literally never have to bend over
for anything in this tent.
I mean, look at that awesome campsite right there.
And all these windows have interchangeable mesh
and clear plastic, tons of airflow
for when you're summer camping.
These are both waterproof straight out of the box,
but they also each come with a rain fly.
And yes, the rain flies come with a stove jack
installed right out of the box.
You can even completely open up
every one of these windows that you see on the front,
the back, and both sides, and have nothing in there,
just have free-flowing air.
And look at that on the inside, 12 feet wide, 28 feet long.
That is an enormous family tent.
And that end down there can even be open as well
to make it just like one gigantic tunnel.
So many options for what you wanna use for your door.
If you wanna use the end here,
if you wanna use one of these windows,
you could even use the hexagon window as a door
or the opposite end.
My preference in a door is to grab a couple of stakes,
couple of tent poles, and create a door right on the end
using that giant window.
Right outside the fire pit,
you can have your seating area in there,
your cooking area in the middle,
your bedroom in the big room in the back,
king-size bed in there, tables, lanterns,
propane stove, wood-burning fireplace.
This tent right here wins every campground.
And it looks awesome from every angle.
How's that for the ultimate campsite?
That does look awesome from every single angle, guys.
S'mores and ghost stories around the fire.
And then when you're ready to go in,
pick up all your chairs, your cooler,
pull them right in here,
set it up as a sitting area in here
so you can chill a little bit before bed.
All your overflow and your cooking and stuff in here.
And then your gigantic master suite back here
with your king-size bed.
And let's not forget about this.
Open up that window and you can kick back
and watch the wildlife or anything else
going on at the campground.
You can get carpets for this tent.
The same carpets that fit in the Cootie Hub
and the Cootie 17.2 will fit.
I mean, this just blows me away right here.
This is absolutely amazing.
And if you really, really wanted more room,
you could still connect another 17.2 Pro down there
or another 17 Pro Hub down here.
And they could just literally keep going
and going and going.
But there it is, guys, connected together,
the 17.2 Pro and the Hub Pro.
Biggest tents available on RBM Outdoors right now
and, in my opinion, the best tents available on the market.
And you can get a discount right now
by using my personal link in the top comment below.
