My Top Pick! Headlight Restoration Kit Showdown

Autos hacks
81 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video compares several popular headlight restoration kits to determine which is most effective for removing oxidation and haze. The presenter tests products from Armor All, Meguiar's, Turtle Wax, and Rain-X, evaluating them based on ease of use, the depth of restoration, and the longevity of the results.
Are your headlights looking dull and hazy? There are a ton of products for
restoring headlights so it can really be hard to know which
one to buy. So today we're going to be testing some of the most popular
headlight restoration products and see how they stack up.
By the end of today's video you're going to know exactly which kit is right for
you and how to use it to make your
headlights look brand new. All right first product we're going to try is the
Armor All Ultra Shine and this is the headlight
restoration wipes. Just comes with six wipes, three for each
headlight and we're going to start with step one
which is the oxidization removal and I've already washed the
headlight with water. I think there needs to be some kind of abrasive but
this does claim that it wipes all the oxidization off.
So we're going to see they're right. I can definitely tell like stuff's coming
off. Yellow haze that was on there and
supposedly coming off here. You just keep going until oxidization
stops coming off. This definitely is less yellow than before but it's still like
you can see where the plastic is rough. So according to
instructions I mean now we're going to just
wipe this with a lint free rag and get ready for this
next step. The instructions say not to let the sealant wipes touch any painted
surfaces and that's going to be true for most of
the kits and some of the kits come with tape
others don't. This one didn't so I'm using some painter's tape but
keep that in mind. If you were super careful I guess you could avoid the
painted surfaces without tape but I don't trust myself so I'm going to be
safer and sorrier. Okay moving on step two the
They say one of these wipes will do both headlights.
Potentially you can get two applications out of this whole kit.
Instructions did not give a whole lot of guidance on this step but I am just
going to do a good 30 overlap in my rows. So unless
something magical happens when it dries there is going to be a lot of leftover
oxidization. You can see the different colors of the
plastic and where it's all like broken apart so I don't know about this.
Scratches here got a little better but you can still see them.
So after you do the sealing wipe it says you got to wait three hours before you
can expose it to moisture or anything. The
manufacturer didn't actually state how long this
repair is supposed to last but we found some user reviews that said
anywhere around four to six months before you would have to redo this
process. Now as far as the overall result it did
get rid of that yellowing color from the oxidization but
what it didn't address was sort of the rough
deeper surface irregularities, the deeper hazing and cracking
that also comes from oxidization. All right the next product we are going to
use is the Meguiar's two-step restoration kit. This does have some
abrasive pads in it so I'm going to go ahead and mask this
headlight out before I do anything. Okay so this kit costs 20 bucks and it
comes with a cleaning solution, some scuffing pads
and headlight coating. So pretty straightforward.
So I'm just going to apply this sucker to the cleaning pad.
Quarter-sized amount it says. Now I like to see that it has this abrasive pad.
Definitely a little more elbow grease required on this one.
Okay so what we're looking for is a uniform smoothness
and color. Let's check our progress. So I can definitely see that it's
blending better. Still not uniform though. I'll give it one
more shot but I'm not sure that these pads are abrasive enough to
cut into that like it should. It's a little better.
I just feel like these pads probably aren't quite aggressive enough
to really cut in and get rid of this completely but
we'll see if the sealant makes any difference. Okay so the final coating
in this kit is actually a spray which may sound easy
but it actually means I have to mask this off a lot more.
I'm going to get my camera operator Andrew to do it. Hi folks. This just went
from being super easy to a little bit more labor intensive. Okay
here we go. Okay so we're just going to wait for
this coat to dry. Okay now it's been three to five minutes.
We are going to do our second coat. So the coating isn't dry yet but I can
already tell that it totally got rid of that variation between
the the rough and smooth areas of the headlight. So I am hopeful that this is
going to look really good. While we take this chance to literally
watch paint dry, grab a cup of coffee sit back and relax
and subscribe to the channel so you can enjoy more of our amazing content.
Okay this dries to the touch in three to five minutes but
not it's supposed to expose it to water for 24 hours when it's fully cured.
As far as overall results, I am actually pretty impressed. The clear coat
really took it all away. It's really clear now. The one issue I do see
is these tiny little bubbles in the clear coat.
I could even see it as soon as I painted it on. The manufacturer says that this
treatment is good for a year and from my research
a lot of people are reporting the same thing. The cool thing about this kit is
they give you enough coating spray and cleaning solution. You
could probably do your headlights at least a couple times.
Okay the next one we're going to try is the Turtle Wax Headlight Restorer
and this one costs $22. It also has abrasive sanding pads so
we're getting Andrew to tape up this headlight.
It has you starting with this clarifying compound
with the idea that that actually might be all of the abrasion you need
and if it's not enough to make the headlight clear then there's other
products in there that you move on to. Apply and rub.
Here we go. I can tell from my rag that I am getting that yellowy stuff out.
This is essentially a rubbing compound. I'm going to go over it one more time.
So after doing that I can tell it's a lot less yellow but
there's still scratches and some deformities
in the surface that this did not get out. So we're going to go to the next step
that they recommend. Going to be using these sanding pads.
There's four sides. Going to start with number one and use the lubricant on the
pad and the lens. Okay I'm going to flip the pad over to
number two. Pads are kind of hard to hold on to so
it's definitely a little more involved than some of the earlier kits.
Okay moving to number three grit. Okay I'm just going to give this little wipe
down and it's a nice uniform foggy haze which
is what we want to see. I think that looks way better. Okay so
now we're moving on to the wipes and they included a glove to wear so I will
definitely be wearing that and they only give you one
cleaning wipe for both sides so you'd want to do both of these at the same
time. Once that is dry we're immediately going to apply the
sealing wipe. Again you only get one of these so you'd want to do both
lenses if you were doing both sides. This says it takes 24 hours to cure.
Turtle Wax doesn't actually say how long this treatment lasts
but a little research online people are saying around six months they have to
reapply this in some cases. Overall results I think are really good.
There's no yellowing and it also got rid of a lot of that surface
irregularity and roughness so I'm pretty stoked on this. Let me know in the
comments if you like Andrew doing all the dirty work on camera as much as I do.
Next one we're going to try Rain-X Headlight Restoration.
Alright so this kit actually comes with a drill attachment which I'm stoked
about because I'm tired of doing things by hand. This first
sand is the one that does all the work and then all the sanding afterwards is
essentially just removing the scratches from the first sand.
To me this process is just so much more satisfying because I feel like it really
removes the whole top layer of this lens. To me it's
better because you're just fully stripping one layer off and you're
and you're basically starting with fresh plastic which I just think is the best
way to do it. Alright we're going to the 4000.
Alright so I'm gonna wipe this lens down get ready for the buffing.
I've got a nice uniform kind of fog to it which is what I want to see.
Alright now we are going to put the buffing compound on
this buffing pad. Not too much. Kind of spread this around so I don't
flail it all over my clothes. Oh yeah. Not even done it and it looks
really good. Okay so we're moving on to the last step
which is the sealer. Rain-X gives you two gloves so I'm a big
fan. Okay I'm gonna do a second application
just to give it some extra protection. Okay so I made a little mistake. The
instruction didn't really say how long to wait before doing a second coat
and I think I didn't wait long enough so I got a bunch of streaks in this
and I really like this whole process because I feel like as I said before
you're getting so much more of the surface of the headlight fully removed
and then you're starting from a nice smooth surface when you coat it.
So Rain-X says wait eight hours before you get these wet
when they're fully cured. They don't say how long this is supposed to last you
but reviews online are looking like six months to a year before you have to do
it again. The last kit that I want to talk about
is a popular one by 3M and we actually use this in another
video on that white truck. I'm not actually going to do this one
today. If you're interested in the nitty-gritty of how it all goes down you
can check out our other video which will include the link to here.
It's $15. It comes with its own masking tape which is different than the other
kits. It also comes with really good instructions like
how long to wait before putting on the second coat. I might not have made that
mistake if I would have had instructions like this.
And then you can get it wet after one hour of it drying
which is pretty cool and they claim that it lasts two years which is actually a
lot longer than most of the other kits claim. We did some research and people
are finding that it'll last at least a year
maybe a little more. So at the end of the day any of these products could work
depending on what you need. So for example if your oxidization isn't really
that bad on your car maybe it's just the yellow color
these two products could work great for you. If you have something a little bit
more heavy that you need to actually get in
there with some abrasive stuff these two have that option for you. If your
headlights just have maybe some discoloration and some
really light oxidization the Armor All kit is like your
simplest bet and it'll get rid of that yellow color.
If you do have some surface flaws that you really need to kind of dig into
you're going to need to get into these four and the Megura is like the simplest.
I mean there's literally just like a pad for kind of roughing it
and then there's a sealant. The Turtle Wax is simpler than these two
so the instructions were really clear. You don't need a drill for this.
Everything was really numbered well. The results from these two are actually
very similar and really good. I think the 3M kit has some advantages
for me. It comes with a roll of tape which is awesome. It's five dollars
cheaper than the Raynex and also the drying time on it is really nice and
short. In addition the testimonials are really
good and a year is a really solid time before you have to do it again.
So if it were me I would go with this kit every time. Guys if you like this
video you're definitely going to want to check out this other one we made
where we compare home remedies for headlight restoration
like Toothpaste, Baking Soda, WD-40. Don't want to miss it.
