Topping Succulents With Fishing Line To Preserve A Layer Of Leaves On The Stem

Succulent plant
100 followers
8 Video Views·Aug 4, 2026
12lb fishing line is great for topping succulents and preserving a layer of leaves on the stem. I use the layer left on the stem to test its firmness for watering the stem. I do this in spring in Ohio because the stems and leaves will propagate faster during growing season. The tops will also grow roots within a couple weeks.
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive guide on propagating succulents during the growing season in Ohio. The presenter demonstrates how to \"chop\" succulents to encourage faster growth, using both scissors and a specialized string-cutting technique to preserve leaves and create new plants from stems and leaf cuttings.
Late April in Ohio, I like to chop these because we're going into growing season
and the leaves that I pull off will root and grow babies faster, like a lot faster.
These are some of the babies that I've grown. The stems that we save in this time will also
grow exponentially faster. They do grow a little bit in the winter, but it's pretty slow.
So this time of year is when I can get the best growth, both from succulents that are attached
to their stems and succulents that I cut in April. So it is now April 26th in Ohio. I cut all of
these with scissors. I use the scissors to just cut the stems off. All of those have been chopped.
These are just tops sitting on dry containers. Never chop a succulent unless it has firm leaves
because the firmness in the leaves means that it is full of water. I came in and watered all of
these last week in anticipation for making this video to make sure all of them would have nice
firm leaves. This one had roots on it when I cut it, so that's ready to go into the soil.
But if you make sure that their leaves are firm, they can just sit on a cup with nothing in it
until roots pop out. Then you can add some soil when you see roots, or you can add a little bit
of water to graze the bottom of the roots, and they will grow more so that you have a nice robust
root system. I usually go with water when I don't have time to put it into soil when the roots pop
out. We had an appointment last week where someone used one of these. It's alola, echeveria
alola. They used one of these in their design, and I wanted to show them how to cut it with a thread
because theirs would eventually stack like this, which is very common.
Succulents regenerate from the center, and they slowly shed their lower leaves like so.
Sometimes their lower leaves stay on, so you're either going to end up with a stem here and your
or you're going to end up with a stacked look here. As I had explained in the last video,
when I chop these and I leave a stem, I want to leave a couple layers of leaves here so that I
can squeeze the leaves to see if they are firm or if they're softening. If the leaves are softening
that I leave on this stem, then I water it. It's harder to tell if you need to water a stem when
it doesn't have those leaves on it. It's not impossible. It's not required that you leave
a layer of leaves. You just don't want to overwater stems because they'll wrinkle up.
As long as the stem is firm, it's likely to produce babies for you, especially April to
October in Ohio at least. I'm sure it differs around the world. So this one needs chopped.
It's very difficult to use in succulent arrangements
when it's like a flower on the top of a tree. It just doesn't ever look quite right.
Since I want to leave some layers, and these are so tight together,
and I want to preserve as many leaves as I can in order to propagate the leaves as well.
I'm sorry. Back to this one. I chopped this off for a customer to show them how to do what I'm
about to show you how to do. I did that last week or the week before. I don't know if we can see
there is a root there that's starting right at the base. I think you might be able to see that.
It's small, but that's how the process goes. The root's starting to come out. It will get longer.
I will put a little water in this cup. I will let more roots form, and then I will plant it
in the dirt. So this is how you do the string cutting. I have done one of these as a demonstration.
You want to choose how you want your succulent to look. I have chosen this layer of leaves.
And you know what? I want to keep this layer of leaves, so I'm actually going to go
down here so that I have a little bit of stem, and I'll show you what I'll do there.
You go all the way around, putting this thread right along the line to cut this off.
I have run this thread all the way around until it has met itself over here.
So this thread is crossing over. Let's make sure we got it right. So I am using 12 pound fishing
line. I suggest using that because I have used thread, like real thread. They call it threading,
but if you pull this, oh, got it. So it popped it off. These were all preserved,
so now I can rock them off and put them into my leaf propagation
tray. And make sure I don't take off too many here. I think that's about how I want it to look.
Maybe one, a few more of these, and it's not going to make that much of a difference.
So here is my top succulent. It will root here like I just showed you on that cup,
with the one I cut last week. I will set that aside, but this is perfect. Babies will grow on
the end of the stem. Squeeze these to know when the stem needs water, and I'm going to set that
aside and put it with all my other stems that I just cut. So the two strings have met each other,
you cross them over, pull it, pop it. It's a nice cut there. I don't need these ones that
are turning down. They are thick, they're wonderful, they will make great pups, babies,
leaf propagations. This is a nice looking succulent, and in a couple weeks it will have roots
and I can put it in the dirt. This is an Echeveria New Black, and the reason I'm cutting it is that
it has gotten this big stem. I'm going to say this one is actually two years old, so it's gotten this
big stem and it has regenerated in the center. I like the way that it looks now, and I just want
to leave a layer of leaves on here. The only reason I'm doing the thread version on this
instead of chopping it is for the purpose of leaving the layer of leaves. So we're gonna put
this here. That looks good. They have met. Take this, and there we go. How satisfying is that?
It's really fun. It's more fun when you've done it a whole bunch of times and you're not concerned
that the plant's gonna die, because I've never actually had one of these not turn out well.
Everyone that I have plucked off has gotten roots, and every stem has grown babies, so I am hopeful
and expectant of what is to come here. Let's just set that there. So this will go in my stem thing.
I will squeeze the leaves to know when it needs water, and bees also are very prolific in
reproducing babies from the stems. This one's pretty top heavy. It's gotten tall. This was
stretched out when I bought it, so I was waiting for the stem and the roots to grow a nice
rosette on the top. So the only purpose of using the string on here is, again, to leave a couple
leaves, and I don't have that many leaves on here. So right now I'm leaving one leaf, and that would
be two leaves, and three. So I'll leave three on there, and we'll see if this will come off without
cutting them. There you go. Very nice. I like it. Again, it's been here for a while. It's created
this long stem. It's got some great color on the leaves from the sun.
Here, here, and we'll leave that one. Lovely. Put this in my stem thing. So here we have this one.
This is very old growth. I think this one is a year and a half to two years old.
It has these leaves that have not expended on the bottom, so instead of having a stem from here down
like you've seen on some of the other ones, it has all these leaves, and that's great for leaving
leaves on the stem, but I want this to be my succulent, because this doesn't look as great
in arrangements or any pots, really. It just, it looks like it needs to be chopped. At least
that's what I see, and I don't think a lot of people see it that way necessarily, but
I'm gonna do this here. I decided where, how I wanted the top to look,
and now I'm gonna go a couple layers below
what I want to keep so that I can pull some of those leaves off.
All right, the two pieces have found each other.
That one's a little crooked. Oh, I got it though. Okay, I wondered how that could have not gone
through, but it was a little crooked. Lovely little plant here. Now, I left a couple rows here that I
still want to take off underneath, so these, since I cut them with a string, are all savable.
That one I didn't do right, so you see it has some flesh exposed.
Good for learning. That's not going to make any babies, so that's why you kind of, then when you,
when you have one break off, it's helpful to take off this thing that you missed, because it helps
the next one pull off. So I'll do this, this one. Oh, that made it. There's that. I think that's good.
So now I've got this little, little bit of stem there, just a little. Helps those roots get in the
soil. Then I have this nice, and I know this one grows babies really, really well. The stems on this
I have gotten a lot of new growth on when I leave it under my tree in the summertime,
so I look forward to what this does this summer. It will be fun to watch. I will keep that.
It's a lot of leaves, but no sense in taking them off now. So, last one. This one,
the secular part that I want to keep, obviously, is all up, while a couple layers have turned down.
Instead of being absorbed by the plant, they're just kind of hanging out, and, you know,
they support it. It's not bad to have them there, but looks-wise, I'd like this up. So I'm just
going to leave one layer of leaves, and there you go. 12-pound fishing line, what'll you know, works
up for time. There you go, and then I didn't actually want probably two layers of this bottom part,
so, as usual, we'll rock these off. This is an agavoids, is the type of echeveria it is, and
I don't recall getting many babies from their leaves, but maybe I just haven't cut that many
of them. So we'll see how these go. I don't have memory of really successful leaf propagation
with these. Maybe I'll feel differently. You can see the turn up here, right there, and then you
Very lovely. I like it. So there's the new plant, and that's it for chopping with strings. I believe
I already did that one. All right, and real quick, I did a video this winter, I think in January,
where I made this stem prop bowl, and I put all these in here without any
thing growing on them, and now we've got all these fun babies growing on the stems. Now,
I have this in a bowl that doesn't have drainage. I was keeping it in my south window at my house,
and I was just taking my squeeze bottle and watering at the base of each stem for about
seven seconds when these leaves felt kind of soft, and then I'd do it again if they were still
soft a couple days later, but that's how they've been since January, and this is what has grown,
and that wasn't growing season, so this is, it's a lot of great growth, really, for being inside,
just in the south window. So there was those, and there's this little bowl.
This is why I keep all of my stems, and they grow way faster in the summertime, especially under a
tree where they get light from the east in the morning and from the west in the evening, but
they are protected from the sun between 11 and 1. So what I'm going to do with these next is take
all of these stems out of here and make one big happy bowl with all those new stems that I cut
in a bowl that has drainage that's much larger, so I can manage all of my stems this summer
in the same spot in the same way. So that will be a video for another time. Thank you for watching.
I hope you learned some very valuable information. Happy propagating to you.
Subscribe to my channel if you want to learn more about succulents. Thanks for watching.
