Spray paint art tutorial for beginners tips and tricks landscape and space techniques

Cosmic Art
22 followers
#GJWart #painting #Satisfying #EasyBubblesPainting #Galaxy #spray #PaintingforBeginners #PLANETS #drawcosmic #galaxypainting
AI Generated·May contain errors
Hey, what's up guys? Thanks for checking out the videos today. I'm gonna go ahead and go over some basics just tips and tricks
Hopefully to help the newer people get started and get going a little bit faster
I'm gonna be throwing quite a few things out today
But you know if you need to you can pause rewind rewatch it
I'm basically gonna explain things how to do the techniques and then you're gonna see like hyperlapse mode of me kind of just putting everything
Into action, but first let's go over the basics as far as materials and whatnot that you should have
All right now one thing that it really helps is not necessarily needed
But it does help is some kind of a turntable to to do your work on I have this right here
I picked up this little turntable at a yard sale for like two dollars, so you know you can look around
You can get something that'll work for you. I
Have these foam brushes
I'm using for mountains for trees or so on it's like two dollars at Walmart for this whole pack
Those are real handy
some latex gloves
Masking tape usually I would say a respirator, but my filters are out right now, so I have this dust mask that I'm using
Of course you need to spray paint. I use Krylon and Rust-Oleum
Pretty much always I might branch out and do some reviews on other paints later, but for right now. That's what I'm working with
You need some newspaper
So I got my newspaper right down here in a bin, and I have some scrap paper right here
I use that uh you know doing clouds or waterfalls or whatever. I'll explain that later on and
Another thing like you guys have a messed up painting instead of tossing it and throwing it away save it
You know I like to have the painting you know stay on standby
So you can do some testing you know if you want to test some sprays or some designs that you're gonna
Do it's always better to test it out for the first time on scrap than on your actual painting
And then for your planets and stuff. There's a lot a lot of different things you can use
I just have some circles. I cut out a poster board. I use those for planets or for eclipses usually
You can use the cap from your spray cans
Another thing a lot of people don't even think about doing if you have just regular cans of from food
You know those make great great stencils for planets, and the reason is that they have that nice thin rim
You want the thinner rim that way it's not gonna grab any paint
It's not gonna peel it back up
And then also if you see how the rim is how it kind of
Goes all the way out to the edge right here some people will have rims like if you have pots and pans lids
Where the rim kind of goes inward if you use those you can have like a kind of dark shadow outline around your planet
It's not gonna really look crisp and clean
So I don't recommend those they get something that it goes all the way to the edge
If you don't have a ventilated area inside then definitely you know paint outside
I know for some people whether it's gonna make that difficult, so you know you can get something out the enclosure
I used to have a tent that I would paint in, but I have this table right here
It's just a fold-up table that somebody was get rid of thing for like 10 15 bucks on online, so pick that up
Always like to let my paint cans just sit out in the Sun for a little bit
If you paint with the paint cans cold you're gonna get a lot of spots
You can get a lot of dots everywhere
It's not gonna be as as fine of a mist when you paint so let them sit out let them warm up before you get
Started and always remember to shake them before you start shake them really really good
And then even while you're painting before you you know spray go ahead and shake it again
All right, I don't want to make you guys have to sit there and watch me. I just went ahead and
Basically made a border for mine some people just do masking tape on the back of their poster board and stick it down the way
It doesn't move. I think adding a border adds. Just a little bit of class to whatever you're doing. You know so just use the masking tape
It's somewhat see-through, so it's easy to you can kind of line it up by eye and make at least somewhat even borders
Doesn't have to be anything perfect
You got to be careful whenever you're peeling this tape off, but I'll go over that when we get to the end and
We're finished with everything
All right took a second to kind of get my hands shook up get my gloves on and get ready to go
First thing I like to do is I like to start off
Placing my stencils where our plans are going to be that way I know where it's at so I'm not putting excess paint where it
Doesn't need to be
Yeah, I think that looks okay
So let's take a little bit of you use black or really any color you want to always just use a little hint of black
Kind of mist it
So that you know exactly where your plants are gonna be yet
For this I try to use more contrasting colors
So if you look at like color wheel you think like primary or secondary colors
You know stuff that's really gonna pop against each other so like you know red and blue red and yellow blue and yellow
You know stuff like that green and purple
You know you can throw oranges in there
Just something that where the colors aren't gonna bleed together because you want your plants to really stick out
I'm gonna show you two different ways of doing texturing for the
Planets you know neither one's better than the other one, but they each have their own unique look so it's kind of fun
Also, be sure to check your your tips if you got some clogged up tips. You know
You can take a credit card, or I have a little palette knife that I use just kind of scrape that off
It's gonna help prevent a lot of splattering whenever you're spraying I
Haven't found that it's really necessary to have it put down in a certain order
I always spray off to the side in case there's a little bit
Of just straight liquid in there, otherwise it's gonna get runny whenever you do this
It's white here
This one just kind of crumple up some paper
And get that nice little textured look right there
for this other one
Instead of just doing a place, we're gonna do a place and smear
Go ahead and flatten it on it, and then pull back and up at the same time
Now the reason I have I use rust-oleum and Krylon paint and the reason is because to me they both have different uses
The Krylon is gonna be a little bit thinner, so it's gonna be good for shading
So you're doing like the dark side the light side of the planets like that
You know the Krylon is gonna be really good for that's not gonna lay down too thick
But the rust-oleum is good if you want the more vibrant thicker paints you really want it to pop
Okay, so try and go for that realism look me
I already know that my light source is gonna be over here, and I want it to be a black hole, so let's go ahead and
Do that I?
Like to act like I said I like to make mine look as realistic as I can so I like to do a nice shadow
fade
So I'm gonna go ahead and use some red tinting here cuz I'm gonna have a black hole with the red space coming off of it
So you got your light source going right here. That's gonna be the back of your planet
Little bit of splatter, so I need to shake up my can a little bit better
In fact actually I'm gonna change it out for for this Krylon saying it's a thinner paint
Still reddish. It's the watermelon color, so
This won't be a stick and not as likelihood for that
splattering to happen
So now you got that nice kind of even fade out going right there
Sometimes some people like to put the white paint on the top some people don't
I'm open a fresh can though when you're whenever your paint starts to get low
It also tend to sputter a little bit. It's getting empty so make sure you have some full cans on standby just in case
Now right here. I think the biggest mistake that most people make is they don't let the paint fully dry before they place the
Stencil down on it if you do that the paints gonna stick to your stencil
If it's still wet and we peel it back up you can have like kind of little pool lines on the paint
It's not gonna look crisp. It's not gonna look clean
So as for that you can do a couple of things you need to put the paint
Painting out in the Sun. You know direct Sun. They'll heat it up and dry it quicker or
So I always have some gloss paint
standby
and a lighter
And then you'll notice I've always paint outside of the area where the sim
So if you're having issues like you want your paint to dry a little bit faster
You can use a little bit like your your clear gloss paint and a lighter
Basically and just heat it up that way
Make sure you grab the right one. I've mixed up cans many many times and messed up a painting and it's really frustrating
And then right here you'll see I always paint outside of my plan area and the reason is so I can do kind of a
touch test
See if it's dry before I actually place my stencil down on it
Yeah, that's good to go
Come on over here, and we'll do the same exact thing on this one
And again, make sure it's uh, it's dry before you try to put anything on there, you know
Just do a little test of this area over here. Just put the white down. So we'll give that a second. Let that dry up
All right, so we've got our planets all painted. We got ready to go. Let's go ahead
Now it's time you got to think about what you're gonna be doing I know I'm gonna be putting some clouds right here
I'm gonna put in some mountains. I'm gonna put some landscape and stuff
But most importantly I'm gonna have a tree
Going up over here when I'm done and with how I do it using the palette knife
This is what it does. It's gonna be exposing the bottom layer of paint
So I need to go ahead and put in the colors that I want to show up whenever I do the tree at the very end
Orange and my red and that's what we're putting down right now
It doesn't look like much right now, but you'll see whenever we come to the end and we start doing the tree
Why that's important. So I'm gonna go ahead and get the sky all colored in
I'm gonna get the black hole colored and then
We'll go from there
All right, so like I said, there's gonna be some clouds and stuff going right here so I like to start off
With black just kind of put in some of the darkness for the clouds
So here's where a kind of fun little cloud
Go ahead take that spare paper that I showed you I had earlier and just kind of
Tear it a little bit. I do have a video strictly on how to do clouds
So if you guys want to swing over and check that one out
Few people said it's pretty helpful. So you might find some good use there
so whenever I'm doing clouds is always wherever your light sources and then the poster board and then the paint can is the easiest way I
Think to explain it to remember it. So let's add in
some highlights here
Once you have those highlights you can come back through and put in some it's more brighter kind of like little thick parts
That looks pretty good
Next we're gonna put in the mountains. I'm just gonna be using a foam brush and putting that in
So I'm gonna go ahead and speed up the video for this part
Okay, so now we're gonna go ahead and do the texturing for the mountains
Different people do different things. Some people use the palette knife. I like to use a poster board
for mine
That's why I do stencils and stuff, too
So I always keep my spare pieces that way I have some nice flat edges that I can use for something like this
I'll kind of do you a quick example for you. And then you know, of course, I'm gonna speed it up
So you have to sit here while I do all of it
But basically what I'm gonna be doing here is I'm gonna be using a little bit of pink
First and I'll put a little bit of white on top now eventually if you want to you could do color on both sides
of the mountains
It's not too hard, but it's a little bit more advanced and since this is for beginners
I'm just gonna go ahead and we're just gonna do the shading on one side of the mountain
Just kind of keep it simple for right now
So whenever I do mine
Basically what I think of if you look at the slope of the mountains I make my poster board do that same angle
so
So you can see I kind of just keep it with that same
Slope all the way down
So we're gonna go ahead and color in the rest of them and then we'll do the white on top of there
So as you can see don't cover all of it
You want a little bit of the black still showing through even on the bright side as you've chosen, you know
Then you have that pink near white, you know, it gives a little bit of depth a little bit of a texture to it
So there's different styles that you could do for the clouds, but since we've already done this style up here
Well, let's go ahead and continue that down here
We're gonna put some clouds and then we're gonna put some landscape in front of the clouds. So
We're gonna put in some trees right here in front of it easiest way to do it
Just go ahead and use that foam brush again
Get some of your black paint
basically just come through and
Find it make sure it's thick if you start getting those streakiness then add a little bit more paint on here
Don't brush here
Keep my where you're gonna be doing things that like I already know that
Where are we put my foliage yet? So I don't really need to go past right here
ain't no point in
wasting paint
Be sure you're doing this give them alternating heights, you know, that'd be anything too fancy, but just
Kind of think about what a tree line would look like if you're doing that
All right, so I went ahead and put these trees in here wasn't really part of my original plan, but I think it looks good
So let's do that
I'm gonna put a little bit of fog in front of that and then I'm gonna do some landscape in front of there
Basically, I'm just gonna take some newspaper
Crumple it up and then I'm gonna dot in my outline of where my landscape is gonna be and then black it out and go
from there
All right, so we got all of that done so
Basically, I'm just gonna go ahead and put on some waterfalls now pretty simple
Take a little bit of your white paint a straight piece of poster board
Get a little bit on there
Dab it on and then just come straight down with it
Pretty simple. It's not too hard. You can do that in different areas
So I went ahead and added a little bit more of a waterfall right here. I didn't feel like that was coming down far enough
So we're gonna go ahead and start doing a little bit of a texturing for the landscape
I'm just gonna keep it simple. Like I said, since this is for beginners and we're gonna do a just green bushes
So I'm gonna do actually a light green. This is a satin lagoon. Technically, that's what it's called
And basically gonna do some some of the lagoon right here
And add a little bit of white
Sometimes I use sponges but for today
I'm gonna go ahead and use newspaper that way if people watching don't have all the materials you can make do with what you have
Let's get get that lagoon on there. And then for your highlight get that edge. It's gonna give you a
Bleed-through right here. So that when you come in
You have a little bit of a transition there
So we'll go ahead and we're gonna get all of that done and then we'll do that last part of the tree
So real quick for these waterfalls and you just go ahead and take
Stop bumping that. Go ahead and take this white paint
Just kind of put it in like where the waterfalls would be at
So we're gonna go ahead and we're gonna do the tree over here that I was talking about in the beginning
So for that, that's where you're clear paint is really gonna come in handy. This is gonna use that to re-wet this area. I
Put on a little bit thick that way it stays wet for a little bit. I'm out here in California
So it's a little bit hot, you know all the time
Just take your scraper or you can use palette knife. You can use poster board. I started off using poster boards
Just kind of come down here
I do a couple of passes just to add some texturing to there
And then you can use the same technique just go ahead and
More of this area
Let's kind of come through and you can add in some branches and stuff, too
If you having issues where it doesn't look like it's really going down far enough
Go ahead and put a little bit more of that clear paint on there
Let's sit for a second and it's gonna re-wet that area so that you can
Then to finish it up I was like take the black
It's kind of darken up the side over here so some of the bushes are still showing through
And now whenever you're peeling this tape, you won't be sure to peel
Away from the poster board if you peel towards it
It's gonna grab the edge of the poster board and it's gonna tear it. So peel it away. Let's go get that unpeeled. I
Almost forgot to say the most important part. Don't forget always always sign your work
All right, you guys put time and effort into this so you want to be sure that you get credit for what you did
Alright guys, well, I
Hope you guys like it. I hope you had fun
If you have any questions about anything you want some clarification on stuff
Just feel free to hit me up on here. Shoot me a comment and I'll do what I can to help you out
Hopefully I'll have some more videos coming your way
Take care guys
