Procreate Sun Illustration for Beginners

2D Digital Painting
12 followers
1 Video View·Jul 28, 2026
A retro poster-style illustration in Procreate, built from scratch. In this step-by-step tutorial we create a tropical scene with layered islands, a sun with a face, palm trees, clouds, and waves, using a limited color palette and chalk texture to get that vintage poster feel. No experience needed. I will guide you through every single step. …
AI Generated·May contain errors
You can draw this in Procreate. I'm going to show you exactly how you can make this super awesome
poster-like illustration in Procreate on your iPad. I will take you through all the steps so
you will end up with an amazing result. All you need is Procreate, of course, on your iPad and
the color palette that I have linked in the description. It's totally free and we're working
on a canvas that is 2300 pixels by 3000 pixels. So if you're ready, let's get started. So the
first thing we are going to do is we are going to change our background color. We will go to
the layer menu, the two little squares, and then tap background color and pick this third color
in our color palette. And then on this layer, on layer one, we are going to create a rectangle.
And for the brush, I want to use the round chalk pencil, which is part of the Treasure Chest brush
pack. If you don't already have it, it's completely free. It contains a super big amount of brushes
and you can find it by going to freefromflow.com and you'll get it for free. So we use the round
chalk pencil and for the color, we will use the second color. Now I have the opacity of this brush
set to 100 percent and the size is at 70 and we will just go along the sides. Let's start about
here. Make a line going up and it can be wobbly. It's just about like where you stop. We'll go down
to about here and then we will close this shape like this and then just hold your pen in place
and it'll turn into a rectangular shape like this. And you could even go to rectangle here at the top
if you want to pull some corners and make it bigger or smaller. Super, super handy. So let's
go for something like this and then I want to fill this with color. But since it's a little bit
textured, your color might spill all over. So what we are going to do, we will drag in our colored
circle and then slide to the left or right until it doesn't spill. You see threshold there at the
top? So let's go to about here and then it doesn't spill. And then you could go in, you could go over
the edge a bit to make it more opaque to get rid of some of the like texture here. But you could
also go to the layer menu and duplicate the layer and then pinch it together and then you might want
to do that again and that will also get rid of any little gaps there. Maybe you have just a few but
it'll help. Then it's time to start drawing. Let's tap the plus for a new layer on top and let's set
this layer to clipping mask so that whatever we draw here, it won't go outside of the shape that
we have here. And for the color, I want to use the fifth color, the pink, and I want to use this to
create some clouds. But first let's make a horizontal line about here and you can hold
your pen in place and tap one finger on the screen to make sure that it's perfectly horizontal. And
then let's go here and let's make these shapes. Maybe we could go even a bit higher. So we'll
make these wobbles and we'll go down in the center. We'll go up again so we get something
like this and then we can color that in. Now we could just close the shape on the sides.
Let me make it a bit more tidy. Close it on the sides like this and then we could drag in the
color again and use that threshold and then we can dive in and adjust those edges. We could also
make the brush a bit bigger maybe like a hundred percent and then we can just go along those edges
maybe make the clouds even bigger. This way we can tidy it up a little bit but it doesn't have
to be too tidy. So don't worry about it too much. You just want to get rid of some of those
chunky parts and then on top of this I want to create two little islands. So let's tap the plus
for another layer and again let's set this to clipping mask so it won't go outside of our
rectangular shape and then let's pick the first color and then we'll start our little island about
here. Let's make like a wavy shape to the right and then here we'll make a horizontal line again.
Tap one finger on the screen so that it's perfectly horizontal and let's make a smaller one
over here then a horizontal line closing the shape and then we can drag in the color
and then we can go in and go over that edge a little bit and that's the downside with a brush
like this when it's textured and if you get these gaps when filling but I really like the outer edge
and how textured it is so we'll just deal with it. Let's zoom out a little so we can see the edges
and now let's go to our sun shape. Let's make that on a layer on top of the others. Let's tap the plus
and for the color we'll go to the fourth color and I want to use a special tool here. Let's go
to the wrench and then to canvas then we'll turn on drawing guide and tap edit drawing guide and
we'll go to symmetry then tap options and turn on radial and also rotational symmetry. Now we can
use this blue dot to move this guide around and let's imagine where the center of our sun will be.
I want it to be nicely centered like in the horizontal center but a little bit higher
perhaps about here and now let's tap the little check mark here and now when you go to your layer
you'll see assisted underneath the layer name. That means that we can use this guide and when you start
drawing you see that you have that rotational symmetry. Now let's make the brush a little bit
smaller. Let's start at 70% and let's first make a circle for our sun. We can just color it in
maybe a little bit bigger and now let's dive in a little bit. Let's make the brush even smaller.
Let's set it to 30% to start making those sun rays. I want it to be a bit like this
and now we need room for another one over here so again we'll make a twisting
shape. You might need a few tries that's okay and then we'll connect it to the next one
to something like this. Now you can go over a few times adjust it a little bit if needed
but with just a few strokes you have an entire sun and you can color it in like this
super handy tool and it also feels a little bit like magical. I can imagine spending hours with
this tool if I was a kid. It's just so much fun to see all the sides like appearing at the same time
so we got some nice sun rays. Yeah perfect so now we don't need this symmetry tool, this
grid anymore so we can go to the wrench we can turn off the drawing guide but when you look at
the layer assisted is still turned on so it's still working. If you want to turn that off
you can just tap the layer and turn off drawing assist. Now on this layer we can add some more
stuff. We can add some clouds for instance. Let's just make a simple cloud shape something like this
and then make the lower part straight and again we can just use the quick shape tool.
Let's go in here let's make the brush a little bit bigger perhaps 70% makes it a bit easier
to fill this in just a simple looking cloud that fits the style of this illustration.
It would look weird if we would add realistic clouds here so another one over here
do some of these bumps and then make the underside straight and then color it in
like this and I also want to add a wave in this scene so let's create like the foamy top
of that wave here by just creating another sort of a cloud shape actually so that's a wavy foamy
top make a nice big shape yeah it's really almost like a like a cloud and now we can go below
we can go we could go to this layer and then just remove a part of this layer so we can see some
blue now you could do that by tapping the layer and then tapping mask and then on this layer mask
we can paint with black we can double tap here to pick black and now we can mask parts of this layer
so we can make a curve here and here and then we can just color this in to create our wave
and then we can go back to this layer again with our white and then we can add some
lines here with some curves that follow like the imaginary shape of our of our wave
and let's also switch to that blue to the second color let's make the brush smaller 30 percent
and let's add some some lines to the top almost looks like a happy face
i do some little curves for some extra texture now let's work on some trees
and for the trees um it's it's a bit more of like a complicated shape so what can be handy
is to create a little sketch before you start creating these so let's go to this layer and
then tap the plus for a new layer on top and then to sketch what shall we use well you can go to any
of the pencils that are already in procreate and perhaps the broony brush will be nice we can just
pick black let's check the size well that's looking good opacity is at 100 size at 50
and let's create a tree over here let's just make a line up and i will imagine
the leaves by just creating these curves this is just the start a starting point for our tree
so you have a bit of like a broader trunk and then for the leaves you can make shapes like this
using that line that we have just created as a guide and it's also like the the top
of the leaf and it doesn't have to be super delicate or tidy um because that's just the style
of this illustration it could be a little bit funky so more of these curved lines for another
tree and then again the undersides can make the stem a little bit broader something like this
now you can use this as a guide we can lower the opacity a little bit of this
to like 30 31 whatever and then let's make another layer by typing the plus
and to make these nice and crisp i want to use the selection tool you can go to the s
shaped ribbon set it to freehand with color filter on and set the color to our first color here
i hope you're having fun so far creating this stylized illustration i'm really inspired by
retro style illustrations lately with lots of texture and simple color palettes if you like
this as well then i think you like my recent tutorial at patreon in which we are drawing
this lady with a cat but of course that's not the only tutorial that i have at patreon i actually
have more than 250 procreate drawing and painting tutorials over there so i'm sure there's something
that you'll like and it's also the perfect place to level up your procreate skills so it would be
great to see you there i will just leave a link for you down in the description so you can find it
and then perhaps i'll find you there but now let's continue and now we can simply make a selection
we can follow our shape our sketch you don't have to follow your sketch exactly
you can create these nice pointy parts for your leaves this way and it's hard to get that
with a brush you always have a bit of a rounded pointy part so this will make it nice and crisp
and you can rotate your canvas to make it easier to create these curves
down close the shape and then you'll see that it fills with color so we have a nice tree over here
you could go out and back in to work on the other one and just repeat the process
so again first the stem some nice pointy leaves and sometimes you can add
some more of those pointy parts your sketch is just a little guide and the other side
this one all the way down closing the shape and now we have two palm trees to make them
match a bit better with the rest you could just use your brush the round chalk pencil
add a bit of a smaller size like 30 and now you can go in there and add some more texture
to the edges and you don't have to go along all the edges because you don't want to get rid of
the well like i said those pointy parts but you can go over a few areas just to make it
match the style at this point of course you can also get rid of that sketch that you made you can
just slide to the left tap delete and then go back to your palm trees and we don't need a guide
anymore this one and let's do the same for the other tree adding a little bit of texture to the
edges this one and i find like this one looking good now we can just merge this with this layer
with our little islands like this then let's pick this fourth color and let's go back to this layer
so on this layer we can add some extras to these hills i'd like to add some lines just for some
extra interest maybe a little bit wobbly to make these look like some rocks also on this side just
just a few maybe another one here and let's also add some waves to the scene let's make our brush
bigger set it to 70 and then go to the wrench and turn on the drawing guide again go to edit
drawing guide and this time set it to the 2d grid and i just want to use this as a guide to make it
easier to create those waves and when you go to your layer menu you'll see that it's not assisted
right now and we don't need assisted because we want some nice waves let's rotate our canvas a
little bit and of course we don't want to go outside of the shape so let's just set this layer to
clipping mask as well and we can use these lines that we're seeing as a guide i want to go a little
bit higher actually so we can have the tips in this case touch one of those lines or perhaps
it looks a bit different for you but it can be helpful so that your waves will be like
not horizontal but they'll follow that horizontal line otherwise you might go down on one side
have some wonky waves and you don't have to make them all the same size try to vary a bit
and then one more at the bottom almost there yes that looks lovely now we can turn that drawing
grid off again by going to canvas and then turning off the drawing guide and i want to go to that pink
layer over here to that layer mask because i want to add some detail to the clouds let's set the
size of the brush to 30 again and we can add some some of these wobbles just to add some more
a cloud effect i think that's nice maybe over here maybe another one here just a small one
that's just a nice extra little touch now it's time to add a face to our sun and this reminds
me a bit actually of the clock that my parents used to have with this moon face we're going to
add a face to this where we will tap the plus for a new layer and then we will pick this first color
again and we'll stick with this brush so let's go to the wrench then turn on drawing guide then go
to edit drawing guide then go to symmetry again then go to options and set it to vertical also
make sure that you turn off rotational symmetry otherwise otherwise weird things will happen
so vertical rotational symmetry turn off and then use the check mark and now when you go to your
layer you'll see that it's assisted again and now let's go in and let's create a nose like this
and then two eyebrows so very simple nose with a nostril like this then for the eyes
we'll just make a shape like this and add a pupil with a little highlight and then a line on top
maybe a little bit higher and then for the mouth we'll make a smile with lips like this
and two round cheeks you can fill it in like this and a little chin yeah i like it then let's go to
the wrench again turn off that drawing guide we don't need to see that line and then finally
i want to add some texture to this piece so let's go and let's group these layers let's slide to the
right on all of these layers then tab group then just close the group like this and slide to the
left tab duplicate this is just so we have a backup and then let's turn off this bottom layer
then for the top layer use flatten this is why i'm using a backup over here because now it's
flattened and then you won't be able to adjust any of the layers anymore so if you want to go back
you still have that group now tab this layer and add a mask and then for the brush we will go to
the grunge brushes and use the motorsport brush and make sure you have it set to black
now you can make it a bit bigger maybe 30 opacity is at 100 but you can definitely play around with
the size and then just go over and what i actually want is for this texture to be light so what we
need to do is we need to duplicate this layer again slide to the left tab duplicate and for
this bottom one make sure that you remove the mask then tap this layer and use alpha lock
then go to the colors pick the fourth one go back to the layer menu tap the layer and use fill layer
now we have a light almost white version so that when we mask on this layer everything will end up
looking light so that's better now i have removed way too much of course with this brush
so let's go back to our motorsport brush and then set the color to white and yeah you can
just do that by double tapping here and then we'll just go over again to make the texture
way more subtle and you can also play around with the size of your brush make it smaller like 15
if you don't want to get rid of too much and of course if you feel like you have removed
too much you can always switch back to black and add more texture again i think something like this
looks good and now we can just pinch it to make it fill the screen use four fingers to admire our
work and call it finished don't forget to share your results i would love to see it and i would
love to see you next time for the next tutorial
